Instrukcja obsługi StarTech.com SM2DUPE11

StarTech.com Niesklasyfikowane SM2DUPE11

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com SM2DUPE11 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 26, 2021 10:15 AM

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram (SM2DUPE11)

Front View

Top Edge View

Component Function

1LCD Display • Displays options, status, and detailsMenu

22.5”/3.5” SATA Drive Connector • Connect a source 2.5”/3.5” SATA Drive

3M.2 Drive Connector • Connect a source M.2 SATA or NVMe Drive

4M.2 Drive Connector • Connect a target M.2 SATA or NVMe Drive

5Drive-Tray Screw /Drive -Tray

Screw Hole • Secures the Drive Tray

6Rubber Drive Holder • Secures the M.2 SATA or NVMe Drive

72.5”/3.5” SATA Drive Connector • Connect a target 2.5”/3.5” SATA Drive

8LED Indicators • Indicates Drive Status

9LCD Display Buttons • Navigate through the LCD Display

10 Power Switch • Toggle or ON (I) OFF (O)

11 Power Connector • Connect the Universal Power Adapter

1 to 1 NVMe/SATA Drive Duplicator and Secure Eraser

Package Contents

• Duplicator Dock x 1

• SATA Drive Extensions Cable x 2

• Anti-Slip/Vibration Pads x 2

• Universal Power Adapter x 1

• Regional Power Cords (NA, JP, EU, UK, ANZ) x 5

• Quick-Start Guide x 1

Product Information

For product information, technical specications, manuals, and Declarations of

Conformance please visit:

www.startech.com/SM2DUPE11

Product Requirements

• M2 SATA/NVMe SSD x 2

• 2.5”/3.5” SATA Drive x 2

Installation

Power the Drive Duplicator and Secure Eraser

1. Connect the to the appropriate .Universal Power Adapter Regional Power Cord

2. Connect the to the on the Universal Power Adapter Power Connector Drive

Duplicator and Secure Eraser.

3. Connect the to a .Regional Power Cord Power Source

4. Toggle the to the position.Power Switch ON (I)

Connect a 2.5”/3.5” SATA Drive

Note: Do not connect drives directly into the Hard Drive Duplicator and Secure

Eraser, as it puts undue strain on the device connectors.

1. Connect the to and to the Drive Connector Cable(s) 2.5”/3.5” SATA Drive(s)

2.5”/3.5” SATA Drive Connector(s) Drive Duplicator and Secure Eraser on the .

2. Place the on the Drive Duplicator and Secure Eraser Anti-Slip/Vibration Pads

(included).

Note: Avoid placing drives directly on a metal surface.

Connect M.2 SATA or NVMe Drive

1. Determine the size of the .M2. SATA or NVMe Drive(s)

10 11

*Product may vary from photos

Erase a Drive

Warning! Backup data prior to erasing any drives.

1. Navigate to and press the .Erase Mode Enter Button

Warning! Do not disconnect the drive until erase process has completed. Doing so

may result in damage to the drive or lost data.

2. When the is no longer ashing and has become solid the Green LED Indicator

erasing process is complete.

Erase and Copy Modes

Mode Denition

Erase modes

Quick erase The partition table is quickly erased

Full erase Erases entire device(s), complying with NIST 800-88

Standards.

DoD3 Pass Erases device(s), complying with DoD 5220.22-M Standards.

DoD 3 Pass+Compare Erases device(s), complying with DoD 5220.22-M Standards

and veries complete erasure.

7-Pass Erase Erases device(s) 7 times complying with DoD

5220.22-M(ECE) Standards.

Secure Erase Erases the non-loadable areas complying with NIST 800-88

Standards.

Enhanced Secure Erase Erases devices that supports this feature.

Copy modes

Copy system and les Only the data area of the 2.5”/3.5” SATA Drive is copied and

the empty space isn’t copied.

Copy all partitions The partition areas of the HDD are copied and the non-

partition, empty space isn’t copied.

Copy the whole HDD The entire HDD is copied, including empty space.

Copy a percentage A specied percentage range of the HDD is copied.

2. Remove the , using a .Drive-Tray Screw Phillips Head Screwdriver

3. Adjust the position of the to the appropriate position on the Rubber Drive Holder

Drive Tray.

4. Insert the through the screw hole in the and tighten, Drive-Tray Screw Drive Tray

using a . Do not over-tighten.Phillips Head Screwdriver

5. Gently slide the on the at a 30-degree Connector M2. SATA or NVMe Drive(s)

angle into the corresponding on the M2. SATA or NVMe Drive Connector(s) Drive

Duplicator and Secure Eraser.

Note: The on the is keyed so that it only ts Connector M2. SATA or NVMe Drive(s)

one way.

6. Lightly push the down, ensuring the M2. SATA or NVMe Drive(s) Rubber Drive

Holder M2. SATA or NVMe Drive(s)connects with the mounting notch on the .

Operation

Copy a Drive

Note: The is capable of 1 to 1 duplication from Drive Duplicator and Secure Eraser

M.2 to SATA, SATA to M.2, SATA to SATA, and M.2 to M.2 drives.

1. Navigate to the , using the , and press the Setup LCD Display LCD Display Buttons

Enter Button.

2. Navigate to the and press the .Copy Area LCD Display Enter Button

3. Select a and press the .Copy Mode Enter Button

4. Navigate back to the .Main Menu

5. Select and press the .Copy Enter Button

Warning! Do not disconnect either drive or interrupt the process until the copy process

has completed. Doing so may result in damage to the drive or lost data.

6. When the is no longer ashing and has become solid the Green LED Indicator

copying process is complete.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to

which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks,

registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related

documents are the property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

GroveConnector, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	Niesklasyfikowane
Model:	SM2DUPE11

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com SM2DUPE11, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane StarTech.com

StarTech.com MCM110SC2P Instrukcja

9 Października 2024

StarTech.com PLATE9M Instrukcja

9 Października 2024

StarTech.com RACKCONV1901 Instrukcja

9 Października 2024

StarTech.com PLATE9MB Instrukcja

9 Października 2024

StarTech.com ET91000LC2 Instrukcja

9 Października 2024

StarTech.com ET10GSFP Instrukcja

9 Października 2024

StarTech.com MCM1110SFP Instrukcja

9 Października 2024

StarTech.com ET91000SFP2 Instrukcja

9 Października 2024

StarTech.com ET91000LC Instrukcja

9 Października 2024

StarTech.com ET91000LCOAM Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024