Instrukcja obsługi StarTech.com Professional ATX2PW430PRO

StarTech.com nieskategoryzowany Professional ATX2PW430PRO

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com Professional ATX2PW430PRO (10 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

Professional 430W/530W

ATX12V 2.3 EPS Computer

Power Supply with Active PFC

- 80 Plus® Certiﬁed

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver •

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an

endorsement of the product(s) to which this manual applies by the third-party company

in question. Regardless of any direct acknowledgement elsewhere in the body of

this document, StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this

manual and related documents are the property of their respective holders.

Introduction ..................................................................... 1

Packaging Contents.....................................................................1

System Requirements .................................................................1

Installation ....................................................................... 2

Hardware Installation ...................................................................2

Speciﬁcations .................................................................. 4

ATX2PW430PRO Power Output ..................................................4

ATX2PW530PRO Power Output ..................................................5

Connectors ..................................................................................5

Technical Support ........................................................... 6

Warranty Information ...................................................... 6

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	nieskategoryzowany
Model:	Professional ATX2PW430PRO
Kolor produktu:	Szary
Waga produktu:	1710 g
Szerokość opakowania:	100 mm
Wysokość opakowania:	225 mm
Głębokość opakowania:	225 mm
Poziom hałasu:	31.3 dB
Certyfikaty:	CE, FCC, 80 Plus, RoHS
Wydajność:	84.81 %
Zakres wilgotności względnej:	5 - 90 %
Waga wraz z opakowaniem:	1960 g
Zakres temperatur (przechowywanie):	-20 - 80 °C
Złącze zasilacza EPS (8-pin):	Tak
Maksymalna temperatura termometru zwilżonego (wet bulb temp.) Podczas eksploatacji (w °f):	0 - 40 °F
Wymiary produktu (SxGxW):	150 x 140 x 86 mm
Prąd wejściowy:	10 A
Złącza zasilania Peripheral (Molex) (4-pin):	3
Maksymalne natężenie prądu:	60 A
MTBF (Średni okres międzyawaryjny):	100000 h
Moc w sumie:	430 W
Moc szczytowa:	500 W
Średnica czaszy wentylatora:	80 mm
Funkcje ochrony zasilania:	over current, over power, over voltage, short circuit
Liczba połączeń (wewnętrznych/zewnętrznych):	13
złącze zasilania PCI Express (6-pin):	2
Typ okablowania:	Niemodularne
Ilość złączy zasilających SATA:	5
Złącze zasilacza ATX (20+4 pin):	Tak
Rodzaj zasilacza (PSU):	ATX
Złącze napędu dyskietek:	1
Notka o napięciu wyjścia:	+12.0V1, +12.0V2, +12.0V3, +12.0V4, -12.0V, +3.3V, +5.0V, +5.0Vsb