Instrukcja obsługi StarTech.com MONPROTECT

StarTech.com Niesklasyfikowane MONPROTECT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com MONPROTECT (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: September 11, 2020
Product Diagram (MONPROTECT)
Rear View
Component Function
1Cable Management
Hole
• Route the and for the Power Video Cables
Display Transparent through this opening in the
VESA Panel
2VESA Mounting Holes
• Insert 4 of the appropriately sized through Screws
the , the , the Washers VESA Mounts Transparent
VESA Panel 5 , the appropriate size and number of
mm 20 mm Spacers Display and/or , and into the
3Transparent VESA
Panel
• Clear acrylic sheet
• Weight - 8.3 lb. (3.76 kg)
• Three mounting heights
• Minimum mounting height (from Mounting
Surface VESA Mountto the middle of the ) - 9.7 in.
(245 mm)
Requirements
For the latest requirements, please visit:
www.startech.com/MONPROTECT
• Clean, Flat, and Stable Surface for Installation
• Display with 75 x 75 mm or 100 x 100 mm Spaced VESA Mounting Holes
Transparent VESA Panel - Single Display
• Monitor Mount with a Single VESA Mounting Point
Consult the for the or contact the of the User Manual Monitor Mount Manufacturer
Monitor Mount Monitor Mount to determine if the can support the combined weight
of the and the . Transparent VESA Panel Display
• Phillips Head Screwdriver
• Two People for Installation and Adjustments
• (Optional - for cleaning) Microber Cloth
Installation
Warnings: Installing the is a two person task. Do not Transparent VESA Panel
attempt to complete the installation with one person.
The additional weight of the may overload the Transparent VESA Panel Monitor
Mount during installation and/or use. Do not exceed the weight capacity of the
Monitor Mount.
(For a Display Already Attached to a Mount) Detach the Display
• Remove the from the .Display Monitor Mount
Note: Refer to the for steps on how to Monitor Mount Manufacturer’s User Manual
remove the from the .Display VESA Mount
Attach the Transparent VESA Panel
Figure 1
Screw
Washer
VESA Mount
20 mm Spacer
5 mm Spacer
VESA Mounting Holes
Display VESA
Mounting Holes
1
2
3
Warning Statements
Make sure that you assemble this product according to the instructions.
Do not exceed the weight capacity of the Monitor Mount used in conjunction with this product.
This product is intended for indoor use only and should not be used outdoors.
This product does not lter UV light and it may amplify the sun’s rays. Exercise caution when using this product close to a
natural light source.
Do not use ammonia-based cleaners to clean this product.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
PHILLIPS® is a registered trademark of the Phillips Screw Company in the United States and other countries.
Warranty Information
This product is backed by a ten-year warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
To accommodate dierent designs, Display MONPROTECT comes with four sets of
Screws that are dierent lengths and diameters:
• M4 x 35mm Screws x 4
• M5 x 35mm Screws x 4
• M4 x 16mm Screws x 4
• M5 x 16mm Screws x 4
To select the that t the , complete the following:Screws Display
• Determine whether the are ush or inset. Inset Display’s VESA Mounting Holes
mounts will require .Spacers
• and/or located ush on the rear of the will require the Power Video Ports Display
use of the .20 mm Spacers
• Determine the appropriate length of required by adding the depth of the Screw
Mounting Holes Display Spacerson the , the length of the appropriate number of ,
and the thickness of the .Transparent VESA Panel
• Determine the appropriate diameter of required by nding the diameter of Screw
the on the . This information may be labeled on the rear Mounting Holes Display
of the . Or, it can be found in the for the .Display User Manual Display
Note: The four sets of (included) may not be compatible with every installation Screws
scenario. Additional (sold separately) may need to be sourced for unique Screws
installations.
1. Remove the from the . Blue Plastic Film Transparent VESA Panel
2. Remove the from the . If the does not VESA Mount Monitor Mount VESA Mount
detach from the , remove the from the Monitor Mount Monitor Mount Mounting
Surface.
Note: Refer to the for steps on how to Monitor Mount Manufacturer’s User Manual
remove the or .VESA Mount Monitor Mount
3. Position the , screen side down, onto a . Display Clean, Flat, and Stable Surface
Tip: The installation should take place close to the intended . This Mounting Location
reduces the distance the must travel with the Two People Transparent VESA Panel
Assembly.
4. Determine if the features or Display 75 x 75 mm 100 x 100 mm Spaced VESA
Mounting Holes.
5. (Optional) Place the necessary number of over the four Spacers Display VESA
Mounting Holes Displayon the rear of the . (Figure 1)
Note: Ensure the correct are being utilized. Display VESA Mounting Holes
6. Determine the desired mounting height of the (low, middle, Transparent VESA Panel
high) and make note of the corresponding . VESA Mounting Holes
7. Lift the over the . Ensure the top of the Transparent VESA Panel Display Transparent
VESA Panel Display is facing in the same direction as the top of the . Lower the
Transparent VESA Panel VESA Mounting Holes while ensuring the selected align
with the (optional) or on the rear of the Spacers Display VESA Mounting Holes
Display.
8. Route the and for the through the Power Video Cables Display Cable Management
Hole Displayand connect them to the .
9. Slide one onto one of the appropriately sized . Repeat for a total of Washer Screws
four .Screws
10. Insert the (with ) through the , the Screws Washers VESA Mount Transparent VESA
Panel Spacers Display VESA Mounting Holes, the (optional) , and into the .
11. Use a to tighten the .Phillips Head Screwdriver Screws
Warning! Do not over-tighten the . If resistance is encountered, stop tightening. Screws
Failure to do so could result in damage to the or the . Transparent VESA Panel Display
12. Connect the and for the to the and Power Video Cables Display Power Source
Video Source.
Mount the Transparent VESA Panel Assembly
1. Reach one hand under the to secure a grip onto Transparent VESA Panel Assembly
the . Use the other hand grip the Display Transparent VESA Panel.
Tip: This step should be completed without gloves. The Transparent VESA Panel
Assembly can easily slip out of gloved hands.
2. Lift the over to the . Transparent VESA Panel Assembly Mounting Location
3. Reattach the to the .VESA Mount Monitor Mount
4. Wipe away any on the with a Fingerprints Transparent VESA Panel Assembly
Microber Cloth.
Operation
Cleaning the Transparent VESA Panel
• Wipe clean with a .Microber Cloth
Note: Do not use to clean the .Ammonia Based Cleaners Transparent VESA Panel

Specyfikacje produktu

Marka: StarTech.com
Kategoria: Niesklasyfikowane
Model: MONPROTECT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com MONPROTECT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane StarTech.com

StarTech.com

StarTech.com MCM110SC2P Instrukcja

9 Października 2024
StarTech.com

StarTech.com PLATE9M Instrukcja

9 Października 2024
StarTech.com

StarTech.com RACKCONV1901 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PLATE9MB Instrukcja

9 Października 2024
StarTech.com

StarTech.com ET91000LC2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com ET10GSFP Instrukcja

9 Października 2024
StarTech.com

StarTech.com MCM1110SFP Instrukcja

9 Października 2024
StarTech.com

StarTech.com ET91000SFP2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com ET91000LC Instrukcja

9 Października 2024
StarTech.com

StarTech.com ET91000LCOAM Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024