Instrukcja obsługi StarTech.com IPUSB2VGA2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com IPUSB2VGA2 (11 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
Manual Revision: 02/24/2021
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IPUSB2VGA2
VGA over IP Extender - 1920 x 1200
*actual product may vary from photos
User Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (A)/NMB-3(A)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence.
Lexploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/
or symbols of third-party companies not related in any way to StarTech.com. Where they occur these
references are for illustrative purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party
company in question. Regardless of any direct acknowledgement elsewhere in the body of this document,
StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other
protected names and/or symbols contained in this manual and related documents are the property of their
respective holders.
User Manual i
Table of Contents
Overview ....................................................................................................... 1
About this product 1 .........................................................................................................................................
Packaging contents 1 ........................................................................................................................................
System requirements.....................................................................................................................................1
Front view 2 ..........................................................................................................................................................
Rear view 2 ............................................................................................................................................................
Software Installation ................................................................................... 3
Software Installation for Windows Computers 3 ....................................................................................
Software Installation for Mac Computers 3 ..............................................................................................
Hardware Installation .................................................................................. 3
Hardware Installation for USB Mode 3 ........................................................................................................
Hardware Installation for Ethernet Mode 4 ..............................................................................................
Conguration ................................................................................................ 4
Conguration for Windows Computers 4 ..................................................................................................
USB Mode 4 .....................................................................................................................................................
Ethernet Mode 4 ............................................................................................................................................
Conguration for Mac Computers 5 ............................................................................................................
USB Mode 5 .....................................................................................................................................................
Ethernet Mode 6 ............................................................................................................................................
Change your Computers IP Address 6 .......................................................................................................
Change the VGA Adapter’s IP Address 6 ....................................................................................................
USB Server Conguration (Windows only) 7 ............................................................................................
Automatic Device Connection 7 ...................................................................................................................
Technical Support ........................................................................................ 8
Warranty Information .................................................................................. 8


Specyfikacje produktu

Marka: StarTech.com
Kategoria: przedłużacz AV
Model: IPUSB2VGA2
Kolor produktu: Czarny
Napięcie wejściowe AC: 100 - 240 V
Wysokość produktu: 23 mm
Szerokość produktu: 73 mm
Głębokość produktu: 101 mm
Waga produktu: 304 g
Szerokość opakowania: 142 mm
Wysokość opakowania: 68 mm
Głębokość opakowania: 167 mm
Certyfikat środowiskowy (zrównoważonego rozwoju): RoHS
Technologia łączności: Przewodowa
Certyfikaty: CE, FCC, TAA
Ilość portów USB: 3
Obsługiwany typ USB: USB Type-A, USB Type-B
Zasilacz sieciowy: Tak
Napięcie pracy: 5 V
Zakres temperatur (eksploatacja): 0 - 40 °C
Zakres wilgotności względnej: 0 - 80 %
Skrócona instrukcja obsługi: Tak
Przewody: LAN (RJ-45), USB
Kanały wyjścia audio: 2.0 kan.
Pobór mocy: 10 W
Waga wraz z opakowaniem: 700 g
Zakres temperatur (przechowywanie): -10 - 60 °C
Model: Nadajnik AV
Prąd wyjściowy: 2 A
Adapter zewnętrznego zasilania: Tak
Prąd wejściowy: 0.6 A
Maks. rozdzielczość: 1920 x 1200 px
Typ wtyczki zasilającej: Typu N
Liczba portów VGA (D-Sub): 1
System dźwięku: Stereo
Maksymalny dystans transferu: 100 m
Wejśćie 3,5 mm: Tak
Uchwyty mocowania dołączone: Tak
Wyjścia VGA (D-Sub): 1
Obsługiwane typy kabli: Cat5
Zestaw układów: DisplayLink - DL-195
Wejścia RJ-45: 1
Gumowe nóżki: Tak
Wyjście 3,5mm: Tak
Daisy chain: Nie
Rodzaje końcówek zasilania w zestawie: ANZ, EU, NA, UK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com IPUSB2VGA2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przedłużacz AV StarTech.com

Instrukcje przedłużacz AV

Najnowsze instrukcje dla przedłużacz AV