Instrukcja obsługi StarTech.com FD121-KVM-EXTENDER

StarTech.com Niesklasyfikowane FD121-KVM-EXTENDER

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com FD121-KVM-EXTENDER (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 23, 2024

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram

FD121-KVM-EXTENDER

Transmitter

Receiver

DisplayPort KVM Console Extender Over Fiber - 4K 60Hz

Component Function

1Power / Connection LEDs • See LED Indicator Table

2Power Supply Port • Connect the included Universal Power Adapter

3Fiber Connection Port • Use an LC-Terminated to connect the Fiber Cable

Transmitter Receiver and

4Video Input Port • Connect a DisplayPort Video Source

5USB Host Connector • Connect to an available on the USB Port Host

Computer HID Port KVM Switchor on a

6USB Status LEDs

• Orange when are connectedUSB Devices

• (Flashes 1~4 times to indicate connected USB

Device number)

7Video Output Port • Connect a DisplayPort Display Device

8USB-A HID Ports • Connect (e.g. Keyboard, Mouse, USB Devices

Trackpad, Number Keypad, or Drawing Tablet)

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/FD121-KVM-EXTENDER

• Computer

• USB Enabled

• DisplayPort Output

• USB Keyboard and Mouse

• DisplayPort Display Device

• Duplex LC Fiber Cable (OM3)

• Multimode extends up to 300M

Package Contents

• Transmitter (Local Unit) x 1

• Receiver (Remote Unit) x 1

• 10G Multimode SFP+ Modules (Pre-Installed) x 2

• Universal Power Adapter (NA/EU/UK/ANZ) x 2

• USB-A to Mini USB-B Cables x 3

• Quick-Start Guide x 1

* Product may vary from image

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Operation

LED Indicators

Installation

1. all (e.g. , , etc.) that will be Power o Devices DisplayPort Video Source Computer

connected to the and .Transmitter Receiver

2. Connect the and all of the to the and Host Device USB Peripherals Transmitter

Receiver.

3. Connect a to the on the , using a DisplayPort Monitor Video Output Port Receiver

DisplayPort Cable (not included).

4. Connect a or to the on the , Computer KVM Switch Video Input Port Transmitter

using a (not included). DisplayPort Cable

5. Connect the to the , using a Transmitter Receiver Duplex Multi-Mode LC Fiber Cable

(OM3).

Note: The cabling cannot go through any networking equipment (e.g., router, switch,

etc.). Ensure the transmit and receive ber leads are reversed between the Local and

Remote Unit.

6. Connect the and to , using the included Transmitter Receiver Power Sources

Universal Power Adapters.

7. all the (e.g. , , etc.) connected Power on Devices DisplayPort Video Source Computer

to the andTransmitter Receiver.

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	Niesklasyfikowane
Model:	FD121-KVM-EXTENDER

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com FD121-KVM-EXTENDER, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane StarTech.com

StarTech.com MCM110SC2P Instrukcja

9 Października 2024

StarTech.com PLATE9M Instrukcja

9 Października 2024

StarTech.com RACKCONV1901 Instrukcja

9 Października 2024

StarTech.com PLATE9MB Instrukcja

9 Października 2024

StarTech.com ET91000LC2 Instrukcja

9 Października 2024

StarTech.com ET10GSFP Instrukcja

9 Października 2024

StarTech.com MCM1110SFP Instrukcja

9 Października 2024

StarTech.com ET91000SFP2 Instrukcja

9 Października 2024

StarTech.com ET91000LC Instrukcja

9 Października 2024

StarTech.com ET91000LCOAM Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024