Instrukcja obsługi StarTech.com DisplayPort

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com DisplayPort (1 stron) w kategorii kabel do komputerów i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.
• 1 x DisplayPort to HDMI adapter
• Multi-mode DisplayPort (DP++) enabled computer
system with available DisplayPort port
• USB enabled computer system with available port
• HDMI enabled display device
1. Make sure the computer system and display device are
turned off.
2. Connect the DisplayPort connector into the host
computer system’s video card.
3. Connect the USB connector on the adapter into an
available USB port on the host computer system.
4. Connect a standard male/male HDMI cable (not
included) from the adapter to an available HDMI
connector on the display device.
5. Power on the display device.
6. Power on the computer system. The Power LED on the
adapter should light up.
7. The computer system should automatically detect
the display device. Driver installation or special setup
requirements depend on the connected display device.
Consult any documentation included with your display
device.
8. The operating system should also automatically detect
and install a new audio output device.
9. If you wish to send audio over HDMI, check the audio
properties for the operating system, to make sure the
USB adapter is set as the default audio device.
NOTE: This will disable audio output from any
speakers/headphones currently connected to the
computer system.
10. If you do not wish to use audio over HDMI, set the
default audio device back to the original audio output
device (e.g. sound card) for your system.
Bus Interface DisplayPort 1.1a
USB 2.0
Video Signal High Speed HDMI (1.3b)
Connectors
1 x DisplayPort male
1 x HDMI female
1 x USB type A male
LEDs 1 x Power
Integrated Cable Length 61cm / 2ft
Maximum Video Resolution 1920x1200 / 1080p
Audio Support Yes - 2 channel LPCM
HDCP Support Yes
Operating Temperature 0°C ~ 70°C (32°F ~ 158°F)
Storage Temperature -10°C ~ 80°C (14°F ~ 176°F)
Humidity 10% ~ 85% RH
Dimensions 80mm x 56mm x 12mm
Weight 103g
Manual Revision:11/18/2010
For the most up-to-date information, please visit www.startech.com

Specyfikacje produktu

Marka: StarTech.com
Kategoria: kabel do komputerów i urządzeń peryferyjnych
Model: DisplayPort

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com DisplayPort, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kabel do komputerów i urządzeń peryferyjnych StarTech.com

Instrukcje kabel do komputerów i urządzeń peryferyjnych

Najnowsze instrukcje dla kabel do komputerów i urządzeń peryferyjnych