Instrukcja obsługi Stanley FMCK626

Stanley Wiertarka FMCK626

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stanley FMCK626 (92 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/92
FMC520
FMC620
2
C
E
B
D
A
3
ENGLISH
(Original instructions)
Intended use
Your Stanley Fat Max drill/screwdriver has been designed for
screwdriving applications and for drilling in wood, metal,
plastics and soft masonry. This tool is intended for
professional and private, non professional users.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.

Specyfikacje produktu

Marka: Stanley
Kategoria: Wiertarka
Model: FMCK626

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Stanley FMCK626, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wiertarka Stanley

Stanley

Stanley STHM10 Instrukcja

8 Października 2024
Stanley

Stanley STMT74840-840 Instrukcja

7 Października 2024
Stanley

Stanley CAP1512-OF Instrukcja

7 Października 2024
Stanley

Stanley SFMEH210 Instrukcja

6 Września 2024
Stanley

Stanley SFMCD721 Instrukcja

1 Września 2024
Stanley

Stanley FatMax FME1250 Instrukcja

30 Sierpnia 2024
Stanley

Stanley SFMEH200 Instrukcja

30 Sierpnia 2024
Stanley

Stanley FMCK467 Instrukcja

29 Sierpnia 2024
Stanley

Stanley STHR1232 Instrukcja

27 Sierpnia 2024
Stanley

Stanley FME140 Instrukcja

27 Sierpnia 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

DeWalt

DeWalt dc987ka Instrukcja

15 Stycznia 2025
AEG

AEG KH 28 Super XE Instrukcja

14 Stycznia 2025
Makita

Makita HR2631FTX4 Instrukcja

12 Stycznia 2025
Holzmann

Holzmann SB 4116HN Instrukcja

11 Stycznia 2025
Bavaria

Bavaria BCD 12/1 Instrukcja

11 Stycznia 2025
Black & Decker

Black & Decker PF126 Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-ID 710 E Instrukcja

11 Stycznia 2025
MSW

MSW -DDM255 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM152 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM205 Instrukcja

10 Stycznia 2025