Instrukcja obs艂ugi Stanley FMC675


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Stanley FMC675 (96 stron) w kategorii Maszyna do pi艂owania. Ta instrukcja by艂a pomocna dla 9 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Strona 1/96
www.stanley.eu FMC675
2
C
B
A
3
ENGLISH
(Original instructions)
Intended use
Your Stanley Fat Max hand-held saw has been designed for
sawing wood, plastics and sheet metal. This tool is intended
for professional and private, non professional users.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
顐縭e and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of 顑乤mmable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodi顐縠d plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the in顑乽ence
of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your 顐縩ger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.


Specyfikacje produktu

Marka: Stanley
Kategoria: Maszyna do pi艂owania
Model: FMC675
Kolor produktu: Black,Stainless steel
Materia艂 obudowy: Stal nierdzewna
Regulowany termostat: Nie
Wysoko艣膰 produktu: 1100 mm
Szeroko艣膰 produktu: 1400 mm
G艂臋boko艣膰 produktu: 500 mm
Podr臋cznik u偶ytkownika: Tak
Uk艂ad: W贸zek
Model: Grill
K贸艂ka: Tak
殴r贸d艂o ciep艂a: Charcoal (fuel)
Termometr: Tak
Walizka: Tak
Liczba k贸艂: 2 szt.
Moc w sumie: - W
nogi: Tak
Kszta艂t p艂yty grzewczej: Prostok膮tny
Wbudowana wydajno艣膰: Nie
Powierzchnia gotowania: 540 x 420 mm
P贸艂ka: Tak
Pokrywka: Tak
Materia艂 p艂yty grzewczej: Stal nierdzewna
Materia艂 powierzchni do gotowania: Emaliowany
W艂a艣ciwo艣ci pokrywy: Pokrywa na zawiasach
Tworzywo wieka: Stal nierdzewna
Pow艂oka obudowy: Emalia

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Stanley FMC675, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮




Instrukcje Maszyna do pi艂owania Stanley

Stanley

Stanley SCD201C2K Instrukcja

8 Pa藕dziernika 2024
Stanley

Stanley FMXOP25203 Instrukcja

2 Pa藕dziernika 2024
Stanley

Stanley FMC710 Instrukcja

18 Wrze艣nia 2024
Stanley

Stanley FMC650 Instrukcja

10 Wrze艣nia 2024
Stanley

Stanley SST1800 Instrukcja

5 Wrze艣nia 2024
Stanley

Stanley STSM1525 Instrukcja

4 Wrze艣nia 2024
Stanley

Stanley FME721 Instrukcja

1 Wrze艣nia 2024
Stanley

Stanley FMC660 Instrukcja

18 Sierpnia 2024

Instrukcje Maszyna do pi艂owania

Najnowsze instrukcje dla Maszyna do pi艂owania

G眉de

G眉de GSS 400 Instrukcja

12 Stycznia 2025
Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025