Instrukcja obs艂ugi Standard Horizon FF-525
Standard Horizon
Morski
FF-525
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Standard Horizon FF-525 (32 stron) w kategorii Morski. Ta instrukcja by艂a pomocna dla 2 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek
Strona 1/32
Page 4
This guide relates to the CPN Series Chart Plotters CPN700i and CPN1010i
For older GPS Chart Plotters, the manual is available for download at
www.standardhorizon.com or by contacting Marine Product Support at 800-
767-2450 ext 6800.
This device complies with Part 15 of the FCC limits for Class A digital devices. This
equipment generates, uses and can radiate radio frequency energy and, if not installed or
used in accordance with the instructions may cause harmful interference with radio
communications.
There is no guarantee that interference will not occur in a particular instance. If this
equipment does cause harmful interference to other equipment, try to correct the problem
by relocating the equipment.
Consult an authorized STANDARD HORIZON dealer or other qualified service technician
if the problem cannot be corrected. Operation is subject to the following conditions: (1) This
device cannot cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
路The FF525 contains dangerous high-voltage circuits which only experienced techni-
cians can handle.
路STANDARD HORIZON will not be liable for errors contained herein, or for incidental
or consequential damages in connection with the performance or use of this material.
路Because we frequently update our software and applications, the pictures shown
through this Owner鈥檚 Manual may be slightly different from what you see.
When plugging in or unplugging a transducer to the FF525 make sure power is turned off.
Copyright 2012. YAESU MUSEN CO., LTD. All rights reserved. Printed in Italy.
No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD.
OM CODE: CPN Operation Manual - Issue D - 100712
CPN and FF525 Operation Manual Page 5
TABLE OF CONTENTS
1 - INTRODUCTION ..................................................................................................................7
1.0 CONVENTIONS USED.....................................................................................7
1.1 GENERAL INFORMATION...............................................................................7
1.1.0 PRODUCT SUPPORT INQUIRIES .....................................................7
2 - CONNECTING THE FF525 .................................................................................................8
2.0 CPN700i ............................................................................................................8
2.1 CPN1010i ..........................................................................................................9
3 - OPERATION ......................................................................................................................10
3.0 UNDERSTANDING THE FISH FINDER PAGE ............................................. 10
3.1 FISH FINDER DISPLAY .................................................................................12
3.2 DISPLAYING THE FISH FINDER PAGE ....................................................... 13
3.2.0 Auto Full Page.................................................................................... 13
3.2.1 200 kHz Full, 50 kHz Full and 50&200 kHz Display Pages ..............13
3.2.2 200 kHz and 50 kHz Zoom Pages .....................................................14
3.2.3 200 kHz and 50 kHz Fish/Chart Pages .............................................14
3.3 FISH FINDER SOFT KEYS ............................................................................14
4 - FISH FINDER SETUP MENU............................................................................................ 17
4.0 FISH FINDER COLOR.................................................................................... 17
4.1 PRESETS .......................................................................................................18
4.2 FREQUENCY..................................................................................................18
4.3 GAIN MODE....................................................................................................19
4.4 RANGE MENU ................................................................................................19
4.4.0 Range Mode .......................................................................................20
4.4.1 Depth ..................................................................................................20
4.4.2 Shift ....................................................................................................20
4.5 INTERFERENCE REJECTION ......................................................................20
4.6 SENSITIVITY MENU ...................................................................................... 21
4.6.0 Gain ....................................................................................................21
4.6.1 STC (Sensitivity Time Control) ..........................................................21
4.6.2 Surface Noise Filter ...........................................................................23
4.7 DISPLAY SETUP ............................................................................................23
4.7.0 Color Settings..................................................................................... 24
4.7.1 Scrolling Speed ..................................................................................24
4.7.2 White Line ..........................................................................................24
4.7.3 Fish Symbols......................................................................................24
4.7.4 A-Scope..............................................................................................24
4.7.5 Water Temperature ............................................................................ 24
4.8 TRANSDUCER SETUP ..................................................................................25
4.8.0 Keel Offset .........................................................................................25
4.8.1 Calibrate Water Speed.......................................................................25
4.8.2 Calibrate Water Temp........................................................................25
4.8.3 Calibrate Aux Temp ...........................................................................25
4.8.4 Set Defaults........................................................................................ 26
4.9 ALARMS..........................................................................................................26
Specyfikacje produktu
| Marka: | Standard Horizon |
| Kategoria: | Morski |
| Model: | FF-525 |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Standard Horizon FF-525, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje Morski Standard Horizon
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
27 Wrze艣nia 2024
Instrukcje Morski
- Morski President
- Morski Garmin
- Morski Lowrance
- Morski Fusion
- Morski IVT
- Morski Simrad
- Morski Raymarine
- Morski Rockford Fosgate
- Morski Humminbird
- Morski Alphatron
- Morski Silva
- Morski Polmar
- Morski Eagle
- Morski Furuno
- Morski Klarfit
- Morski BandG
- Morski Dickinson Marine
- Morski Efoy
- Morski Navionics
- Morski Echotec
- Morski Lofrans
- Morski Fastnet
- Morski KVH
- Morski Lorenz
- Morski Raytheon
- Morski Geonav
- Morski Digital Yacht
- Morski Plastimo
Najnowsze instrukcje dla Morski
5 Pa藕dziernika 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
27 Wrze艣nia 2024