Instrukcja obsługi Speco Technologies SecureGuard SG719

Speco Technologies kamera bezpieczeństwa SecureGuard SG719

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies SecureGuard SG719 (10 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

SecureGuard Server®

About this Quick Setup Guide

Before operating the unit, plesae read this user’s guide thoroughly and

retain it for future reference.

Product Components

Internal Connections continued

Quick Setup Guide (Ver.2. )6

Speco Technologies SecureGuard Server ®

Model: SG719(2U)

The following components are included:

QT: 1

**Server comes with rack ears mounted**

QT: 1

Power Cable

QT: 2

Internal Connections

Front View

Power on the Server

• Please follow the proper power ON procedures to avoid damaging the server.

• Connect all necessary components, e.g. monitor and cameras, before powering

•

the server.

Power ON the server by depressing the Power Switch ( ) to boot up the server.1

WARNING: To reduce the risk of database corruption due to power loss,

Speco strongly urges use of an uninterruptible power supply with our

SecureGuard servers.®

• After boot up, at the Windows login screen, you will see that the default user

account is “ ”. There is associated with the default Speco Tech no password

account. It is highly advisable to set a password after logging into the

Windows home screen for the first time. See .Image 1

Note: The server comes pre-loaded with SecureGuard Server ®

software.

• At the Windows Desktop home screen, run the SecureGuard®

Conguration Tool to setup the server by double clicking on

the SecureGuard® Conguration Tool icon. See Image 2. Image 2

•If prompted to select or create a System Recordings folder, point to the storage

drive where the recordings will be stored (Recordings D:). Otherwise move on

to the next step. See Image 3.

Note: SecureGuard® servers come with independent hard drive(s) for the

storage recordings and the operating system. DO NOT store recordings on

the hard drive dedicated for the operating system.

Run SecureGuard® Conguration Tool

Rear View

Image 3

Quick Setup Guide

Image 1

WARNING: Please store your password

in a safe location. Speco Technologies will

not be able to assist you in recovering a

lost password.

Run SecureGuard® Conguration Tool continued

Image 4

Image 5

Setting up Network

Image 6

•To disable the scheduled update check, uncheck the box next to “Enable

Automatic Updates”. Click “Apply” to confirm changes.

• Note: Server must be connected to the internet

to search and download updates.

•When prompted, enter the

default username admin

and default password

admin to access the

SecureGuard® Configuration

Tool. See Image 4.

•At the “System” tab, ensure

“System Recordings” file

path is pointing to the

storage drives. See Image 5.

•Reminder: SecureGuard®

ser ers come with v

independent hard drive(s) for

the storage recordings and the

operating system.

•DO NOT store recordings in

the ar drive dedicated for h d

the operating system.

Setting up Setting up Software UpdatesSoftware Updates

•SecureGuard® will be set to

check for updates on a daily

basis. The time to check for

updates can be modified by

simply changing the hour,

minute, and meridiem. You

can manually check for

updates by clicking “Check

Now”. See Image 6.

Setting up Database Backup

•The “Database” tab is where you

import or export settings and back up,

restore, or validate the SecureGuard®

database. See Image 7.

Image 7

•Choose where you would like to

backup your database by clicking

“Browse”.

•Note HIGHLY: It is recommended

that you backup your database to a

separate drive and NOT to your C:

drive.

Adjust the time’s hour, minute, and

meridiem to specify what time the

database will be backed up. And

lastly, select whether the database

will be backed up on a daily basis or

weekly basis. Once completed, click

“Apply”. See Image 8. Image 8

Image 9

Image 10

•Note: For servers with Dual Network

Interface Cards, it is that highly advisable

the camera and the client connection

network traffic be kept separate.

•In the “Network” tab, fo “Client r

Interface” select the network adapter that

remote client(s) will connect to. For

“Video Interface” select the network

adapter that the camera(s) will connect to.

See Image 9.

•To register the server with Speco’s Free

DDNS, ensure the “Enable Speco

DDNS” checkbox is selected, and enter a

name for the server in the “Host Name”

field and click on “Submit/Update”. See

Image 10.

•If the server name isn’t currently

registered with Speco’s DDNS server,

then the registration will be successful. If

it fails, use a different name for the “Host

Name” See Image 11.

•By default, the server uses ports 7312 and 7313 for

network communication.

•Note: To avoid network conflicts with devices that also use the server default

ports 7312, 7313 7314, and the option of changing the port numbers is available

through the Configuration Tool. The servers come shipped with an inbound rule

for Window’s firewall that allows communication on the server default ports. If

the server default ports are changed, please ensure the existing inbound rule is

updated, or create a new inbound rule permitting communication on the new

server port values.

Image 11

Adding Sites (IP Cameras, DVRS, NVRS, Mobile Devices)

•The “Sites” tab is where sites (IP

cameras, DVRs, NVRs, and mobile

devices) can be added, deleted or updated.

There are two methods of adding sites to

the server. The first method uses “Site

Locate” which automatically scans the

Local Area Network for IP cameras and

select DVRs,NVRs, and hybrid DVRs.

See Image 12.

Image 12

•Clicking on “Site Locate” will open the

“Site Locate” window and start scanning

the local area network for your devices.

You can rescan the network by clicking

on “Refresh”. See Image 13.

Image 13

Image 14

To add a site to the server, double click on the device

to bring up the “Site Settings” window. Ensure the

values for all the fields are accurate, enter the

camera’s login credentials, and verify the accuracy of

the information by clicking on “Check Site”. If the

connection is successful, click “OK”. See Image 14.

Server Rails

(Instruction Manual

Included)

Rack Bracket

Adapters

Hardware

QT: 1 pair

1 3

4 5 6

9 10

Power Failure LED: Flashing LED indicates power

supply failure.

Information LED:

STATUS

Continuously on and red

Blinking red (1 Hz)

Blinking red (0.25 Hz)

Solid blue

Blinking blue (300 msec)

NIC2 Activity LED: Indicates network

activity on LAN 2 when flashing

NIC1 Activity LED: Indicates network

activity on LAN 1 when flashing.

HDD Activity: Indicates drive S AS/—

SATA, SCSI, and or DVD-ROM activity —

when flashing.

Power Status: Indicates power is being

supplied to the power supply units.

· 123.5” HDD Bays x

AC Inputs for Redundant Power Supply

2.5” HD Bay x2

DB9 COM Port

IPMI Interface x1

USB 2.0 x2, USB 3.0 x2

10 Gigabit Ethernet LAN ports x2

VGA Output

2 Mini-SAS HD SFF8644 x2

①Power Switch

②Reset Switch and LED Status Indicators

QTY

Quick Setup Guide (Ver.2. )6

Speco Technologies SecureGuard Server ®Model: SG719(2U)

Adding Sites (IP cameras, DVRs, NVRs) continued Installing SecureGuard on Client PCs ®continued

Setting Up Schedule Recording continued

200 New Highway

Amityville, NY 11701

1-800-645-5516

www.specotech.com

Speco Technologies is constantly developing and improving products.

We reserve the right to modify product design and specifications

without notice and without incurring any obligation. Rev. / /13 07 9

Adding Users

Startup & Live View continued

Startup & Live View

•The devices will now be listed under

“Sites to add” list.

•Continue to repeat this process for the

remaining IP cameras that must be

added to the server. Once complete,

click on “OK” to exit the “Site Locate”

window. The cameras that were added to

the “Sites to add” list will now be made

available in the “Sites” tab. Click on

“Apply” to complete adding the sites to

the server. See Image 19.

•The second method of adding sites to the

server is by manually entering the site

information. This method must be used

when adding mobile devices as well as

DVRs, NVRs, and hybrid DVRs not

scanned in ‘Site Locate’. To enter site

information manually, click on “New” in

the “Sites” tab to bring up the “Site

Settings” window. See Image 15.

•Fill in the values for all the fields, and

verify the accuracy of the information by

clicking on “Check Site”.

•Note: A “Check Site” should always

be performed when adding a DVR/

NVR/Hybrid. Doing so will confirm

the number of channels on the site in

order to toggle PTZ control for the

channels and, if needed, restrict users

from specific channels in the client.

•Correct any information by clicking

‘Fix’. See Image 16.

•Click “OK”. See Image 17.

•The channel boxes under PTZ Control

will now be consistent with the number

of channels on the DVR, NVR, or

Hybrid. Perform another “Check Site”.

If the connection is the successful, click

“OK” on both windows. See Image 18.

•Finally click on “Apply” to add the

site(s) to the server. See Image 19.

Image 15

Image 16

Image 17

Image 18

Image 19

Setting Up Schedule Recording

•To set up a recording schedule, click on

the “Schedules” Tab.

•Next to “Action:” select the type of

recording—Continuous, Motion, or Sensor

—by clicking on the button (radio button)

next to it.

•The schedule grid is made up of rows and

columns. The rows pertain to the days of

the week (Mon-Sun), and the columns

pertain to the hours of a day (00HR-23HR).

•The cells inside the schedule grid can be

colored in based on the type of recording

selected. The color representation is as

follows: Green for Continuous, Blue for

Motion, Orange for Sensor, and White for

No Recording. To color in the grid, hold

down the left mouse button and drag the

mouse cursor over the grid. See Image 20.

•To set the entire schedule to a single

recording type, click on the white box

located in the top-left most corner of the

grid. See Image 21.

Image 20

Image 21

•Once the schedule and recording type has been set, associate the schedule with

individual sites (IP cameras, DVRs, NVRs) by moving over the sites listed under

“Available Site…” to “Sites using schedule …” by clicking on

•Click on “Apply” to save the schedule.

•Note: By default, the server comes

loaded with 3 user accounts—Admin,

User, and Guest.

•Go to the “Users” tab, here you can add,

edit, or delete users, and manage user site

privileges through roles and permissions.

•To add users, click on “Add User” See

Image 22.

•The “Add User” window will pop up.

See Image 23.

•Note: While the User Password is filled

in, it actually has no password assigned to

it.

Image 22

Image 23

•Enter the new user credentials, and select a

“User Role” based on the level of access

you wish the user to have. An

“Administrator” role has full access to the

system and sites. The permissions

associated with this role cannot be

modified. The “User” and “Guest” roles

have limited access, but the permissions

can be modified. Users and Guests can also

be restricted to specific sites and channels

by toggling the boxes next to the sites and

channels. See Image 24.

•Note: A customized role can be created to

meet varying levels of access control. Image 24

•The name and email field are not mandatory.

•Click on “OK” to exit the “Add User” window, and click on “Apply” in the

“Users” tab to add the user(s) to the system.

Installing SecureGuard® Client on Client PCs

•Download the latest version of the SecureGuard® Client from our website.

(www.specotech.com)

•Once the client software has been downloaded, start the installation by running the

executable file.

•Uncheck the components you don’t wish to install on the client computer. This

option is limited to the following components:

•SecureGuard® Streaming Audio App

•SecureGuard® Player

•Start Menu Shortcuts

•Desktop Icon

•Components deemed necessary for

the operation of SecureGuard® Client

cannot be unchecked. Click on “Next”

to proceed. See Image 25.

Image 25

•Select the destination folder where

SecureGuard® Client will be installed

by clicking on “Browse”, or use the

suggested destination folder which

SecureGuard® Client will create.

Click on “Install” to proceed. See

Image 26.

Image 26

•Once the installation is complete, the SecureGuard® Client user login window will

open. If not, run the application by double clicking on the SecureGuard® Client

desktop icon.

•At the user login window, enter the server address. The server address can be the IP

address of the server or the DDNS name. If using the latter, please make sure “Use

DDNS” checkbox is checked and then click on “OK”. See Image 27.

Drop-down contains

previously entered

Server Addresses.

Enter Server

Address

(DDNS or IP

Address) here.

Check the box to

connect to server

using DDNS name.

Enter username for

Enter password

associated with

the username.

Image 27

•Once logged in, the SecureGuard®

Client Welcome window will pop up.

Click “OK” to proceed. See Image

28.

•Next, the User Settings window will

pop up. Here the sites that were

added to the server will be listed

under Saved Sites. See Image 29.

Image 28

Image 29

•In order to view the sites, they need to

be placed in a group. To start off, a

default group has already been created

named Group. To add the sites to

Group, click on

After adding the sites, click on

“Apply”. The “Apply” button will be

grayed out, indicating the sites have

been added to Group. Click on

“Close” to exit the User Settings

window. See Image 30.

Image 30

•The Open Group window will pop up listing all the groups and sites. Select

Group and click on “OK” to begin viewing the sites added to Group. See Image

31 and Image 32.

Image 31

Image 32

Specyfikacje produktu

Marka:	Speco Technologies
Kategoria:	kamera bezpieczeństwa
Model:	SecureGuard SG719

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies SecureGuard SG719, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kamera bezpieczeństwa Speco Technologies

Speco Technologies O2VLB7 Instrukcja

21 Września 2024

Speco Technologies O4IB1 Instrukcja

17 Września 2024

Speco Technologies HTSD37X Instrukcja

12 Września 2024

Speco Technologies VLDT5W Instrukcja

25 Maja 2024

Speco Technologies D16WHSM Instrukcja

22 Maja 2024

Speco Technologies SecureGuard SG719 Instrukcja

20 Maja 2024

Speco Technologies O2D11M Instrukcja

16 Maja 2024

Instrukcje kamera bezpieczeństwa

Najnowsze instrukcje dla kamera bezpieczeństwa

TRENDnet TV-IP602WN Instrukcja

5 Października 2024

Home Protector 72268 Instrukcja

5 Października 2024

TRENDnet TV-IP302PI Instrukcja

5 Października 2024

Abus IPCB42510B Instrukcja

28 Września 2024

Vivotek FE8171V Supreme Instrukcja

28 Września 2024

Vivotek MD7530 Dome Instrukcja

28 Września 2024

Vivotek IP8362 Supreme Instrukcja

28 Września 2024

Vivotek NR8401 NVR Instrukcja

28 Września 2024

Vivotek ST2403 Software Instrukcja

28 Września 2024

Vivotek PZ8111W PTZ Instrukcja

28 Września 2024