Instrukcja obsługi Speco Technologies Intensifier HTINTB4

Speco Technologies kamera bezpieczeństwa Intensifier HTINTB4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies Intensifier HTINTB4 (2 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

◈

◈◈FEATURE

1. Long visible range at night.(50m Max. indoors,

40m Max. outdoors)

2. This camera uses split glass technology to preven

IR light reflection.

3. This camera has a vari-focal IR lens to prevent

focus drift under IR lighting.

4. The IR cut filter is removed at night to receive

maximum available light.

5. This product is weather resistant to resist rain,

snow and other environmental factors. (IP65)

6. This product is made of corrosion-free materials to

resist rust and corrosion for extended periods o

time.

7. The built-in sunshield helps the camera produce

clear pictures under a variety of lighting conditions.

8. Power & video cables are concealed for extra

security. (Cable through the mount).

9. Unique bracket allows the camera to be full

adjustable from both wall and ceiling mounting

positions.

10. Dual voltage operation. You can connect 24V AC

or 12V DC regardless of polarity. The Line-Loc

function is available when you use 24V AC power.

11. The IR output level is adjustable to suit any lighting

condition.

12. DNR (Digital Noise Reduction)

By using this DSP chip and associated technology,

the amount of low light noise has been significantl

reduced, and the signal-to-noise ratio (S/N) and

horizontal resolution has been improved resulting

in a clear and sharp image display even in low light

conditions.

13. Horizontal Resolution of 600 TV Lines

Clear image quality has been achieved by em-

ploying a 1/3" SONY Super HAD CCD Ⅱ with

410,000 pixels, which provides a horizontal res-

olution of 600 TV lines.

14. True day/night ICR exchange of 2 Filters

This camera has a function that automaticall

selects the mode that is appropriate for daytime o

night-time conditions. The COLOR mode operates

in daytime conditions to provide optimum colors,

and the BW mode operates in night-time condi-

tions to enhance the definition of the image.

15. PRIVACY function(12 programmable zones per screen))

The privacy zone function makes it possible to

mask specific areas of the scene from view.

16. Digital Zoom

This camera has a Digital Zoom (limit 16X)

◐

◐◐DIMENSION

◈

◈◈CONFIGURATION

◈

◈◈WALL MOUNT INSTALLATION #1

1. Make a hole Ø30mm in diameter for routing cable.

2. Using the mounting plate, drill four holes on the wall.

3. Insert the anchors.

4. Attach the screws.

◈

◈◈WALL MOUNT INSTALLATION #2

1. Adjust horizontal angle.

1) Loosen the bolt to adjust the horizontal angle o

the camera.

2) Use the WRENCH to tighten the bolt after adjusting

the camera.

2. Adjust vertical angle

1) Loosen a bolt to adjust vertical angle of the camera.

2) Use the WRENCH to tighten a bolt after adjusting

the camera.

Speco Technologies is constantly developing product

improvements. We reserve the right to modify product design

and specifications without notice and without incurring any

obligation.

Rev. 7/7/10.

HTINTB4

◈

◈◈CEILING MOUNT INSTALLATION #1

1. Make a hole Ø30mm in diameter for routing cable.

2. Using the mounting plate, drill four holes on the ceiling.

3. Insert the anchors.

4. Attach the screws.

◈

◈◈CEILING MOUNT INSTALLATION #2

1. Adjust horizontal angle.

1) Loosen the bolt to adjust the horizontal angle o

the camera.

2) Use the WRENCH to tighten the bolt after adjusting

the camera.

2. Adjust vertical angle

1) Loosen the bolt to adjust the vertical angle of the

camera.

2) Use the WRENCH to tighten a bolt after adjusting

the camera.

◈

◈◈SPECIFICATION

Model No. HTINTB4

Image Sensor 1/3" SONY SUPER HAD CCD

Ⅱ

Effective Pixel 768(H) X 494(V) PIXEL

Cell Size 6.35

㎛

(H) X 7.4

㎛

(V)

Scanning System 2 : 1 Interlace

Sync. Type Internal / Line lock(24V AC)

OSD Multi-language

WDR Set SSDR / BLC / HLC / OFF

Resolution Color : 600 TV-Line, B/W : 700 TV-Line

S/N Ratio 52dB(AGC OFF, Weight ON)

Min. Illumination

LED ON : 0 Lux(40M Range)

LED OFF : 0.0005 Lux(Color Sense-up),

0.0002 Lux(B/W Sense-up)

Color Temp. ATW(1,700°K ~ 11,000°K) /

AWC / MANUAL / OUTDOOR / INDOOR

Shutter 1/60 ~ 1/120,000sec

Intensifier AUTO / FIXED / OFF(x2 ~ x512 selectable)

Gain Control LOW / HIGH / OFF

Speco DNR OFF / ON(1 ~ 32 Level adjustable)

V Motion ON / OFF(8 Zone, Alarm output)

Privacy ON / OFF(12 Zone)

Mirror H / V / BOTH / OFF

Clarity ON / OFF(Level adjustable)

D&N ICR(COLOR / Black&White / AUTO)

Stabilize ON / OFF

Digital Zoom ON(x16) / OFF

DPC 256 point(Even 128 point, ODD 128 point)

Power Supply Regulated 12V DC or 24V AC

Current Consumption 150mA(LED OFF), 700mA(LED ON)

Operation Temp. -20

℉

to 122

℉

Dimension

3.1”W X 3”H X 6.8”L

Weight

3.3Ibs.

※The specification is subject to change without any

prior notice to improve the quality.

◈

◈◈FUNCTIONS

1. Setup for camera functions

①

①①SETUP :

Press "SETUP" button to go to the menu.

②

②② ③

③

③③Up, Down :

Use "UP" or "DOWN" button to navigate.

④

④④ ⑤

⑤

⑤⑤Left, Right :

Use "RIGHT" or "LEFT" button to navigate

⑥

⑥⑥EXT-VIDEO :

Test monitor connection.

⑦

⑦⑦LED :

LED level adjust. (Factory default is Max.)

" "sign means that you can go to a sub menu when

pressing the "SETUP" button.

" --- " means that a function is not available.

2. Camera function setting

Page 1

Function

setting

Select

Sub

menu Summary

DC IRIS

BRIGHT

NESS,

IRIS

SPEED,

FOCUS

ADD.

Adjust the brightness of the screen

(Range : 1~70, Default : 25)

Adjust the Iris speed of the DC lens

(Range : 1~50, Default : 3)

Focus addition : To adjust the lens

focus correctly

ADJUST

LENS

MANUAL BRIGHT

NESS

Manual mode is not recommended

using built-in the DC Lens(Default :

25)

BRIGHT-

NESS

Brightness ADJ. : Adjust the bright-

ness of the screen when using the

DC lens(Range : 1~70, Default : 25)

E -

SHUTTER

MANUAL

FLK, - - -

Auto setting is not selectable

when selected DC Lens

AUTO

GAIN

OFF,

LOW,

HIGH

OFF : Deactivates function

LOW : Auto selection between

5.3dB and 32dB

HIGH : Auto selection between

5.3dB and 37dB(You cannot

use the DIS, Day&Night when

AGC is off)

SENS-

OFF,

AUTO

OFF : Deactivates function

AUTO : Using sense up when it is

low luminance(x2~x512 selectable)

RETURN Save the value then move back

to previous menu

EX-

POSURE

*Notes : If the AGC is off, the sense-up function is not

available. As the sense-up level increases, an after-

image will appear.

ATW Color temperature 1,700~11,000°K

OUT-

DOOR Color temperature 1,700~11,000°K

INDOOR Color temperature 4,500~8,500°K

MANUA

L Adjust the Red or Blue values to

shift the color of the screen

COLOR

TEMP

AWC

→

SET

Find the optimal white balance for

current luminance environment

(The camera focus must towards

to white paper)

OFF Deactivates function

WDR

SET ON Wide dynamic range function(1

~15 level selectable, Default : 8)

OFF Deactivates function

SLC

LEVEL,

TOP,

BOTTOM,

LEFT,

RIGHT

User programmable SLC zone

and compensation level

SLC SET

HLC

LEVEL,

LIMIT,

MASK

COLOR,

MASK

TONE,

TOP,

BOTTO

M, LEFT,

RIGHT

Removed HIGH LIGHT, It enable

us to watch license plate clearly

ON Level

Reduce noise in low illumination

(Reduction level is selectable,

Default : 20)

OFF Deactivates function

SPECO

DNR

*Notes : If the AGC is off, the DNR function is not available

AUTO

BURST

MODE

COLOR

→

B/W,

B/W

→

COLOR,

RETURN

Day : Color

↔

Night : B/W

(Switching time & speed adjust-

able)

EXT Change the color

↔

B/W by ex-

ternal signal (Not available)

COLOR Fixed at color(LED OFF)

B/W

BURST

MODE

(OFF/ON),

RETURN

Fixed at B/W(LED ON)

DAY &

NIGHT

*Notes : If the AGC is off, this function is unavailable

Page 2 Please refer to "Page 2"

SAVE Save the value and exit menu

NOT

SAVE Exit the main menu without save

EXIT

DE-

FAULTS Reset the camera setup value

to the factory default

Page 2

Special

setting

Select

Sub

menu Summary

V-REV Set a vertical image inversion

H-REV Set a horizontal image inversion

DIGI-

ZOOM Max 16x digital zoom available

(Default : X1.0)

FONT

COLOR Change the color of OSD

(Default : Blue, 5 color is available)

CLARITY

The image outline will be strong

and clear according to sharpness

level increasing(Default : 13)

If this function is Off, it may looks

like un-focused

ADJUST

RETURN Save the value then move back

to previous menu

LCD

GAMMA,

PED

LEVEL,

COLOR

GAIN,

DEFAULT

SET

USER

GAMMA,

PED

LEVEL,

COLOR

GAIN,

DEFAULT

SET

MONI-

TOR

CRT

PED

LEVEL,

COLOR

GAIN,

DEFAULT

SET

You can change the settings value of

video appropriate to your monitor

OFF No title displays on the screen

CAM

TITLE ON

Display the camera's title on the

screen(Max. 15character, position

adjustable)

INT Internal Sync with 12V DC power

SYNC

TYPE LL Setting the phase is selectable when

used 24V AC(Dual power only)

SENSITI

VITY

AREA1~

AREA8

When sensitivity number is high,

also motion detection sensitivity

will increase

AREA

MODE OFF, ON Determines whether to use the MD

area selected in SENSITIVITY

SEL

POS

L_TOP,

R_TOP,

L_BOT-

TOM,

R_BOT-

TOM

Determines which of the 4 vertices

of each MD area is to be used

XPOS Determines the coordinate of the

horizontal axis for SEL POS

YPOS Determines the coordinate of the

vertical axis for SEL POS

FILL

→

SET

Fill the color in selected area(The

color of filling is sequentially se-

lected as brown, orange, blue,

cyan, yellowish green, yellow, ma-

genta and red.)

RETURN Save the value then move back

to previous menu

MOTION

*Notes : If the camera detected motion, "MOTION

DETECTED" will appear on the screen

AREA

SEL

AREA1~

AREA12

AREA

MODE ON, OFF

MASK

COLOR

GREEN,

RED,

BLUE,

BLACK,

WHITE,

GRAY

MASK

TONE 1~10

TOP

BOTTOM

LEFT

RIGHT

Make a zone for your privacy

You can select privacy zone up

to 12 area PRIVACY

RETURN Save the value then move back

to previous menu

LAN-

GUAGE Select language

STABI

-LIZE

ON,

OFF This function can be mitigates image

movement from external factors

PAGE 1 Select this to save the special menu

settings and return to the main menu

ㆍThe " " icon appeared with desired function, press the set

button to move sub menu.

ㆍThe "---" icon appeared with function that is unavailable

according to function setting.

3B05753D

HTINTB4

Specyfikacje produktu

Marka:	Speco Technologies
Kategoria:	kamera bezpieczeństwa
Model:	Intensifier HTINTB4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies Intensifier HTINTB4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kamera bezpieczeństwa Speco Technologies

Speco Technologies O2VLB7 Instrukcja

21 Września 2024

Speco Technologies O4IB1 Instrukcja

17 Września 2024

Speco Technologies Intensifier3 HTINTD8H Instrukcja

15 Września 2024

Speco Technologies O2PTZ34D5W Instrukcja

14 Września 2024

Speco Technologies HTSD37X Instrukcja

12 Września 2024

Speco Technologies O4VT1M Instrukcja

10 Września 2024

Speco Technologies HT5200BPVFG Instrukcja

10 Września 2024

Speco Technologies Intensifier 3 HTINTD8H Instrukcja

7 Września 2024

Speco Technologies O5T2M Instrukcja

6 Września 2024

Speco Technologies O4iD2M Instrukcja

27 Maja 2024

Instrukcje kamera bezpieczeństwa

Najnowsze instrukcje dla kamera bezpieczeństwa

Hanwha XNV-C6083R Instrukcja

20 Marca 2025

AirLive AirCam VD-240M Instrukcja

13 Marca 2025

AirLive AirCam BU-225S Instrukcja

13 Marca 2025

AirLive AirCam PTZD-630MAI Instrukcja

13 Marca 2025

AirLive AirCam BU-240M Instrukcja

13 Marca 2025

AirLive AirCam PTZB-630MAI Instrukcja

13 Marca 2025

Swann SWIFI-SE2KPT Instrukcja

12 Marca 2025

Swann SWNVK-500KH4 Instrukcja

12 Marca 2025

AirLive AirCam VD-640MAI Instrukcja

12 Marca 2025

Konyks Camini Air 2 Instrukcja

27 Lutego 2025