Instrukcja obsługi Soundmaster MCD-9700

Soundmaster system hi-fi MCD-9700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Soundmaster MCD-9700 (11 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/11

Modell MCD-9700

Bitte vor Inbetriebnahme sorgfältig lesen

Read instructions carefully before using the unit

Avant de metre en service votre appareil, lisez attentivement ce instructions

I. SAFETY PRECAUTIONS

1．

．

．．INSTRUCTIONS BEFORE USE:

1) Power source: It is applicable to AC source of 220V-240V and 50Hz/60Hz.

2) Temperature: The ideal surrounding temperature is over 5฀. Difficult operation may occur under

0฀. Keep away from heat source.

3) Protection: Protect the cable plug, cable cord and socket against stepping, extruding and

dragging.

4) In case of no use for a long time

In case that you do not use for a long time by a trip or other, never fail to pull out the power plug

out of the receptacles.

5) Insertion of foreign substance will be prohibited

It might cause fire or hindrance if any subjects such as coin, needle which may conduct electricity

will be put into the unit. Particularly you have to pay attention to the children's mischief.

6) Water and moisture

The unit should not be used near water---for example, near bathtub, washbowl, kitchen sink, in a

wet basement, or near a swimming pool, and the like

7) Ventilation: Good ventilation is required.

Never put DISC or any fabric over the machine. Distance from wall shall be no less than 10cm for

good ventilation..

8) Cleaning

Always use a soft, dry cloth to clean the unit, Do not use such liquid as benzene or thinners, or

chemically-treated cloths. Also, do not spray aerosol type insecticides near the unit.

9) To prevent electric shocks

Never open the top cover, rear panel and touch internal parts. Doing so can result in malfunction.

When moving the unit, always unplug the power cord and disconnect all connection cords to

prevent short-circuits or damaged wires. If an object or water should enter the unit, unplug the

unit immediately and contact your store of purchase or qualified service personnel.

WARNING:

This equipment is the Class-I laser unit with low-power laser head inside. To prevent your eyes from

any injury caused by laser, please never open the casing or repair the equipment by yourself without

any authorization. The equipment must be repaired by the professional personnel.

Note: to lessen the danger of electric shock, do not remove the enclosure (or back) of the unit, for

there is no parts to be repaired inside the unit. Please send this unit to the professional personnel for

repair.

[The symbol of electricity with arrow inside the triangle aims at reminding the user that there is the

dangerous voltage without insulation inside this unit, which is sufficient to cause the danger of

electric shock to people.]

[The exclamation mark inside the triangle aims at reminding the user that there is the important

operation and maintenance manual accompanying with this unit.]

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be places on the apparatus.

The power switch of this apparatus is not all pole power switch, so when it is on off position, the

apparatus inside maybe still exist electric shock.

Warning: to lessen the danger of fire or electric shock, prevent this unit from wetness or dampness.

Note:

To avoid any electric shock, do not use the excessively long electric wire, socket or other

power inserts for this plug (with polarity) without any authorization. Insert all pins completely to

the end without any metal part exposed.

2. PREPARATION BEFORE PLAY.

2.1 Accessory: (check if the following accessories are complete after unwrapping the box).

2.2 Install the battery of the remote controller.

Press down on the compartment cover, and slide

to remove the cover.

Place the two batteries (UM4), (AAA), (LR03)

batteries in the remote control according to

the polarity markings ("+" and "-") inside the

compartment.

Place the cover over the compartment, press

down lightly, and push it upward until it snaps on.

II. BRIEF OVERVIEW OF CONTROL KEYS

1. IDENTIFICATION OF CONTROLS

Front view

2 X SPEAKER WIRE

1 X FM AERIAL

1 X AM AERIAL

1 X REMOTE CONTROL

1 X MANUAL

1. Speaker

2. Remote receiving window

3. LCD display

4. Previous track button

5. Next track button

6. Stop button

7. BAND/USB/SD button

8. Play/Pause button

9. AUTO button

10. EQ button

11. INPUT button

12. Standby button

13. USB socket

14. SD socket

15. CD drawer

16. Headphone socket

17. AUX socket

18. Volume -/+ button

19. Open/Close button

Specyfikacje produktu

Marka:	Soundmaster
Kategoria:	system hi-fi
Model:	MCD-9700

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Soundmaster MCD-9700, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje system hi-fi Soundmaster

Soundmaster NR515 Instrukcja

16 Września 2024

Soundmaster DISC5000 Instrukcja

14 Września 2024

Soundmaster MCD5500SW Instrukcja

11 Września 2024

Soundmaster MCD380 Instrukcja

11 Września 2024

Soundmaster DISC 3800 MP-3 Instrukcja

2 Września 2024

Soundmaster DISC 4040 Instrukcja

31 Sierpnia 2024

Soundmaster DISC-3110 Instrukcja

23 Sierpnia 2024

Soundmaster DISC-3005 Instrukcja

6 Lipca 2024

Soundmaster DISC4020 Instrukcja

5 Lipca 2024

Soundmaster NR917 Instrukcja

5 Lipca 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI EIE Pro Instrukcja

13 Października 2024

Sharp XL-540H Instrukcja

11 Października 2024

Kenwood M-9000S Instrukcja

10 Października 2024

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024

Morel SUB-10X Instrukcja

9 Października 2024

Morel USUB 803 Instrukcja

9 Października 2024

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024

Morel Sopran 934 Instrukcja

9 Października 2024

NAD M10 V3 Instrukcja

9 Października 2024

NUVO NV-MPS4-E Instrukcja

8 Października 2024