Instrukcja obsługi Sony HDFA-200

Sony Niesklasyfikowane HDFA-200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sony HDFA-200 (35 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/35

OPERATION MANUAL [English]

1st Edition (Revised 1)

HD OPTICAL FIBER ADAPTOR UNIT

HDFA-200

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or

moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified

personnel only.

Afin de réduire les risques d’incendie ou

d’électrocution, ne pas exposer cet

appareil à la pluie ou à l’humidité.

Afin d’écarter tout risque d’électrocution,

garder le coffret fermé. Ne confier

l’entretien de l’appareil qu’à un personnel

qualifié.

Um die Gefahr von Bränden oder

elektrischen Schlägen zu verringern, darf

dieses Gerät nicht Regen oder Feuchtigkeit

ausgesetzt werden.

Um einen elektrischen Schlag zu

vermeiden, darf das Gehäuse nicht

geöffnet werden. Überlassen Sie

Wartungsarbeiten stets nur qualifiziertem

Fachpersonal.

For the customers in the U.S.A.

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own

expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority to

operate this equipment.

All interface cables used to connect peripherals must be

shielded in order to comply with the limits for a digital device

pursuant to Subpart B of Part 15 of FCC Rules.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

For the customers in Canada

This Class A digital apparatus complies with Canadian ICES-

003.

Pour les clients au Canada

Cet appareil numérique de la classe A est conforme à la

norme NMB-003 du Canada.

For the customers in Europe

This product is intended for use in the following

Electromagnetic Environments: E1 (residential), E2

(commercial and light industrial), E3 (urban outdoors), E4

(controlled EMC environment, ex. TV studio).

Pour les clients en Europe

Ce produit est prévu pour être utilisé dans les environnements

électromagnétiques suivants : E1 (résidentiel), E2

(commercial et industrie légère), E3 (urbain extérieur) et E4

(environnement EMC contrôlé, ex. studio de télévision).

Für Kunden in Europa

Für die folgenden elektromagnetischen Umgebungen: E1

(Wohnbereich), E2 (kommerzieller und in beschränktem

Maße industrieller Bereich), E3 (Stadtbereich im Freien) und

E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).

AVERTISSEMENT

WARNUNG

WARNING

This HD Optical Fiber Adapter Unit is classified as a CLASS 1

LASER PRODUCT.

Dieser HD Optical Fiber Adapter Unit ist als LASERPRODUKT

DER KLASSE 1 eingestuft.

Tämä HD Optical Fiber Adapter Unit on luokiteltu 1. LUOKAN

LASERTUOTTEEKSI.PRODUCT.

Den här HD Optical Fiber Adapter Unit klassificeras som en

LASERPRODUKT AV KLASS 1.

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

CAUTION

The use of optical instruments with this product will increase

eye hazard.

Laser Diode Properties

Wave length: 1310 ±40 nm

Emission duration: Pulse Modulation

Laser output power: 141 μW