Instrukcja obsługi Sony GDM-90W01T

Sony Inne akcesoria komputerowe GDM-90W01T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sony GDM-90W01T (91 stron) w kategorii Inne akcesoria komputerowe. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/91

3-858-581-14 (1)

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Manual de instrucciones

Istruzioni per l’uso

Color Graphic Display

取扱説明書

GDM-90W01T

(22.5” viewing image)

Owner’s Record

The model and serial numbers are located at the rear of the unit.

Record the serial number in the space provided below. Refer to

these numbers whenever you call upon your service representative

regarding this product.

Model No. Serial No.

WARNING

To prevent fire or shock hazard, do not expose the unit

to rain or moisture.

Dangerously high voltages are present inside the set.

Do not open the cabinet. Refer servicing to qualified

personnel only.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for

help.

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

INFORMATION

This product complies with Swedish National Council for

Metrology (MPR) standards issued in December 1990 (MPR ll) for

very low frequency (VLF) and extremely low frequency (ELF).

INFORMATION

Ce produit est conforme aux normes du Swedish National Council

for Metrology de décembre 1990 (MPR ll) en ce qui concerne les

fréquences très basses (VLF) et extrêmement basses (ELF).

Hinweis

Dieses Gerät erfüllt bezüglich tieffrequenter (very low frequency)

und tiefstfrequenter (extremely low frequency) Strahlung die

Vorschriften des „Swedish National Council for Metrology (MPR)“

vom Dezember 1990 (MPR ll).

INFORMACIÓN

Este producto cumple las normas del Consejo Nacional Sueco para

Metrología (MPR) emitidas en diciembre de 1990 (MPR ll) para

frecuencias muy bajas (VLF) y frecuencias extremadamente bajas

(ELF).

Dieses Gerät entspricht den folgenden europäischen EMV-

Vorschriften für Betrieb in Wohngebieten, gewerblichen

Gebieten und Leichtindustriegebieten.

EN55022/1994 Klasse B

EN50082-1/1992

EN60555-2/1987

Hinweise

• Aus ergonomischen Gründen wird empfohlen, die

Grundfarbe Blau nicht auf dunklem Untergrund zu

verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu

geringem Zeichenkontrast).

• Aus ergonomischen Gründen sollten nur Darstellungen auf

dunklem Hintergrund bei Vertikalfrequenzen ab

60 Hz (ohne Zeilensprung) benutzt werden.

• Die Konvergenz des Bildes kann sich auf Grund des

Magnetfeldes am Ort der Aufstellung aus der korrekten

Grundeinstellung verändern. Zur Korrektur empfiehlt es sich

deshalb, die Regler an der Frontseite für Konvergenz so

einzustellen, daß die getrennt sichtbaren Farblinien für Rot,

Grün und Blau bei z.B. der Darstellung eines Buchstabens zur

Deckung (Konvergenz) gelangen.

Siehe hierzu auch die Erklärungen zu Konvergenz.

NOTICE

This notice is applicable for USA/Canada only.

If shipped to USA/Canada, install only a UL LISTED/CSA

LABELLED power supply cord meeting the following

specifications:

SPECIFICATIONS

Plug Type Nema-Plug 5-15p

Cord Type SVT or SJT, minimum 3 18×

AWG

Length Maximum 15 feet

Rating Minimum 7A, 125V

NOTICE

Cette notice s’applique aux Etats-Unis et au Canada

uniquement.

Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser

le cordon d’alimentation portant la mention UL LISTED/CSA

LABELLED et remplissant les conditions suivantes:

SPECIFICATIONS

Type de fiche Fiche Nema 5-15 broches

Cordon Type SVT ou SJT, minimum 3 18×

AWG

Longueur Maximum 15 pieds

Tension Minimum 7A, 125V

This monitor is Energy Star Compliant

when used with a computer equipped

with VESA Dispaly Power Management

Signaling (DPMS). As an International

ENERGY STAR Partner, we have

determined that this product meets the

International NERGY E STAR Program

for energy efficiency.

This monitor complies with the TCO

1992 guidelines for power saving when

used with a computer equipped with

VESA Dislay Power Management

Signaling (DPMS).

この装置は、情報処理装置等電波障害自主規制協議会

（VCCI）基準に基づく第二種情報技術装置です。この

装置は、家庭環境で使用することを目的としています

が、この装置がラジオやテレビジョン受信機に近接して

使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをしてください。

Table of Contents

Precautions ............................................................................ 3

Getting Started ...................................................................... 4

Selecting the Input Signal.................................................... 4

Functions of Controls........................................................... 5

Selecting the OSD Language .............................................. 7

Changing the OSD Position ................................................ 7

Operating the OSD ............................................................... 7

Adjustments (Normal mode).............................................. 8

Adjustments (Expert mode).............................................. 12

Control Lock Function ....................................................... 15

Degaussing the Screen ....................................................... 15

Plug & Play.......................................................................... 16

Damper Wire ....................................................................... 16

Power Saving Function...................................................... 16

Input Signal Warning Function........................................ 17

Use of the Tilt-Swivel ......................................................... 17

Specifications ...................................................................... 17

Troubleshooting ................................................................. 18

Installation

• Prevent internal heat build-up by allowing adequate air

circulation. Do not place the unit on surfaces (rugs,

blankets, etc.) or near materials (curtains, draperies) that

may block the ventilation holes.

• Do not install the unit near heat sources such as radiators

or air ducts, or in a place subject to direct sunlight,

excessive dust, mechanical vibration or shock.

• Do not place the unit near equipment which generates

magnetism, such as a converter or high voltage power

lines.

Maintenance

• Clean the cabinet, panel and controls with a soft cloth

lightly moistened with a mild detergent solution. Do not

use any type of abrasive pad, scouring powder or solvent,

such as alcohol or benzine.

• Do not rub, touch, or tap the surface of the screen with

sharp or abrasive items, like a ballpoint pen or a

screwdriver. This type of contact may result in a scratched

picture tube.

Transportation

When you transport this monitor for repairing or shipping,

use the original carton box and packing materials.

Warning on power

connection

• Use a proper power cord for your local power supply.

Examples of plug shapes

• Before disconnecting the power cord, wait for at least 30

seconds after turning off the power to allow the static

electricity on the CRT display surface to discharge.

• After the power has been turned on, the CRT is

demagnetized for approximately five seconds. This

generates a strong magnetic field around the bezel, which

may affect the data stored on magnetic tapes or disks near

the bezel. Place such magnetic recording equipment and

tapes/disks away from this unit.

The socket-outlet should be installed near the

equipment and be easily accessible.

Precautions

for 100 to 120 V AC for 200 to 240 V AC

Specyfikacje produktu

Marka:	Sony
Kategoria:	Inne akcesoria komputerowe
Model:	GDM-90W01T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sony GDM-90W01T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Inne akcesoria komputerowe Sony

Sony PCGA-CG10 Instrukcja

8 Października 2024

Sony PCGA-PRGR1 Instrukcja

3 Października 2024

Sony PCWA-AR300 Instrukcja

27 Września 2024

Sony PCGA-MM532SD Instrukcja

21 Września 2024

Sony PCGA-AC5 Instrukcja

18 Września 2024

Sony VGP-DDRW4 Instrukcja

17 Września 2024

Sony PCWA-A220 Instrukcja

16 Września 2024

Sony GDM-500PS Instrukcja

15 Września 2024

Sony VGP-PRT1 Instrukcja

12 Września 2024

Sony GDM-FW9011 Instrukcja

11 Września 2024

Instrukcje Inne akcesoria komputerowe

Najnowsze instrukcje dla Inne akcesoria komputerowe

Avocent AVCTBND1 Instrukcja

11 Stycznia 2025

Gembird NBS-DR1-01 Instrukcja

8 Stycznia 2025

Biltema 84-8781 Instrukcja

2 Stycznia 2025

Icy Box IB-DK2252AC Instrukcja

29 Grudnia 2024

Icy Box IB-NH300 Instrukcja

29 Grudnia 2024

Icy Box IB-553SSK Instrukcja

29 Grudnia 2024

Iiyama OMK5-1 Instrukcja

29 Grudnia 2024

StarTech.com DK31C3HDPD Instrukcja

28 Grudnia 2024

StarTech.com DK30A2DHUUE Instrukcja

28 Grudnia 2024

StarTech.com CDP2HVGUASPD Instrukcja

28 Grudnia 2024