Instrukcja obsługi Sonifex On Air Sign SingleFlush 20

Sonifex nieskategoryzowany On Air Sign SingleFlush 20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sonifex On Air Sign SingleFlush 20 (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

SignalLED User Handbook

SIG NAL LED STUDIO I LLUMINATED SIG NS

SIG NAL LED STUDIO I LLUMI NATED SIG NS

SignalLED User Handbook

SIG NAL LED STUDIO I LLUMI NATED SIG NS

SIG NAL LED STUDIO I LLUMINATED SIG NS

Technical Specications

Physical Specication

Power Supply: Plug-top power supply providing 6V at 1A, with 4

international wall adapters (UK, EU, US and AUS) and 5m

lead to bare ends.

Power Input: 5-7V DC

40cm Sign: 500mA max

Input Connector: 4 way screw terminal block

Control Inputs: 2 x pull-down to 0V

Perspex Dimensions: Single: 40cm (W) x 8cm (H)

Equipment Type

Single Flush Mounting Signs (20cm):

LD-20F1REC 20cm ‘RECORD’ Sign

LD-20F1ONA 20cm ‘ON AIR’ Sign

LD-20F1MCL 20cm ‘MIC LIVE’ Sign

Single Flush Mounting Signs (40cm):

LD-40F1REC 40cm ‘RECORD’ Sign

LD-40F1ONA 40cm ‘ON AIR’ Sign

LD-40F1MCL 40cm ‘MIC LIVE’ Sign

LD-40F1PHN 40cm ‘PHONE’ Sign

LD-40F1TRF 40cm ‘TRAFFIC FLAG ON’ Sign

LD-40F1ADB 40cm ‘AD BREAK’ Sign

LD-40F1REH 40cm ‘REHEARSAL’ Sign

LD-40F1DOR 40cm ‘DOOR’ Sign

LD-40F1OBT 40cm ‘OBIT’ Sign

LD-40F1NOE 40cm ‘NO ENTRY’ Sign

LD-40F1EXIT 40cm ‘EXIT’ Sign

LD-40F1SIL 40cm ‘SILENCE PLEASE’ Sign

LD-40F1MET 40cm ‘MEETING IN PROGRESS’ Sign

LD-40F1INT 40cm ‘INTERVIEW IN PROGRESS’ Sign

Twin Flush Mounting Signs (2 x 20cm):

LD-40F2TX-REH 2 x 20cm ‘TX’ & ‘ REH’ Sign

LD-40F2ONA-MCL 2 x 20cm ‘ON AIR’ & ‘MIC LIVE’ Sign

Double Sided End Mounting Signs (40cm):

LD-40E1REC 40cm ‘RECORD’ Sign

LD-40E1ONA 40cm ‘ON AIR’ Sign

LD-40E1MCL 40cm ‘MIC LIVE’ Sign

Mounting Kits:

LD-KE1 End Mounting Kit For 40cm Or 20cm Flush Mounting Signs

LD-IT LED Sign End Mounting Installation Tool

Weights & Boxed Dimensions:

Sign Type Width

(cm) Depth

(cm) Height

(cm)

Gross

Weight

(kg)

Nett

Weight

(kg)

LD-20F1 style signs 39 20 11 1.0 0.65

LD-40E1 style signs 60 20 11 1.1 0.75

LD-40E2 style signs 60 20 11 1.1 0.75

LD-40F1 style signs 60 20 11 1.1 0.75

LD-40F2 style signs 60 20 11 1.1 0.75

Note : Weights are approximate and based on a sign supplied with the PSU.

SignalLED LD-E1, LD-E2 & LD-KE1

User Handbook

This handbook is for use with the following stock codes:

LD-40E1MCL SignalLED double sided end mounting 40cm MIC LIVE sign

LD-40E1ONA SignalLED double sided end mounting 40cm ON AIR sign

LD-40E1REC SignalLED double sided end mounting 40cm RECORD sign

LD-40E2 SignalLED twin double sided end mounting 2 x 20cm sign

LD-IT SignalLED end mount sign installation tool

LD-KE1 SignalLED conversion kit, single ush mount to end mount

©Sonifex Ltd, 2009

Revision 1.0, March 2009

Sonifex Ltd, 61, Station Road, Irthlingborough,

Northants, NN9 5QE, England.

Tel: +44 (0)1933 650 700

Fax: +44 (0)1933 650 726

Email: sales@sonifex.co.uk

Website: http://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent a commitment on the part of

the vendor. Sonifex Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any

error contained in this manual.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,

including photocopying, recording, information storage and retrieval systems, for any purpose other than the purchaser’s

personal use, without the express written permission of Sonifex Ltd.

Unless otherwise noted, all names of companies, products and persons contained herein are part of a completely

ctitious adaptation and are designed solely to document the use of Sonifex product

SignalLED User Handbook

SIG NAL LED STUDIO I LLUMINATED SIG NS

SIG NAL LED STUDIO I LLUMI NATED SIG NS

SignalLED User Handbook

SIG NAL LED STUDIO I LLUMINATED SIG NS

SIG NAL LED STUDIO I LLUMI NATED SIG NS

112

Warranty Information

This product is supplied with a 12 month back to base warranty. For further details, please

refer to the Sonifex website: http://www.sonifex.co.uk/company/terms/index.shtml

In order to register the date of purchase so that we can keep you informed of any design

improvements or modications, it is important to complete the warranty registration

document that is enclosed and return it to Sonifex Ltd in the UK.

For your own records you should write down the serial number of the SignalLED sign.

Serial Number TL………………………………………

Introduction

The SignalLED Sign is a new elegant approach to illuminated displays and signage. Using

the latest technology and components, the SignalLED sign can be simply congured onsite

for colour and mode.

t $IPPTFGSPNXIJUFHSFFOSFECMVFZFMMPXPSBOHFDZBOBOENBHFOUB

t $IPPTFGSPNBMBSHFSBOHFPGEJòFSFOUTJHOUFYU

t 'PVSJMMVNJOBUJPONPEFTDPOTUBOUøBTIJOHQVMTJOHBOEPò

t 5XPDPOUSPMQVMMMPXJOQVUT

t 4JOHMFPSUXJOTJHOTXJUITFQBSBUFDPOUSPMT

t %$JOQVUQPXFSTVQQMZQSPWJEFE

t 'MVTIUPUIFXBMMPSFOENPVOUFE

t %PVCMFTJEFEFOENPVOUJOHBWBJMBCMFGPSVTFJODPSSJEPST

t 4JNQMFUPJOTUBMM

t $VTUPNTJHOTDBOCFNBEFUPPSEFS

Safety Information

This equipment has been designed to meet the safety regulations currently advised

in the country of purchase and it conforms to the safety regulations specied by use

of the CE Mark. This equipment operates in a horizontal position.

Installation Notes

The SignalLED sign should be installed in an area which is not subject to excessive heat or

cold. Also, you should avoid installing it in atmospheric conditions which are dusty, smoky,

or dirty, or where there is moisture or vibration. The sign is for internal use only. The unit is

not sealed and cannot be used outside or in very damp or humid environments.

Do not use any solvents to clean the sign. Use a soft dry brush or a clean cloth moistened

with water or mild detergent.

Avoid using the SignalLED sign close to strong sources of electromagnetic radiation such as

video monitors or high power electric cabling.

In all cases the SignalLED sign should be installed and serviced by qualied personnel.

2. Setting Which Side (Segment) of Your Sign Illuminates

B&OTVSFBMMUIFTXJUDIFTBSFTFUUPUIF0òQPTJUJPO

b) Set SWT 2 and 3 to modify the relevant input state:

Function SWT2 SWT3

Program resting state (when no signalling inputs are active) 0ò 0ò

Signalling Input 1 active state On 0ò

Signalling Input 2 active state 0ò On

Signalling Input 1 and Input 2 active state On On

c) Set SWT 6 to 8 as follows:

Side (Segment) SWT6 SWT7 SWT8

Master (section of the sign nearest the

connection block) 0ò 0ò 0ò

Slave (section of the sign furthest from the

connection block) On 0ò 0ò

Whole Sign 0ò 0òOn

E4FU4850OBOESFUVSOJUUP0òUIJTTBWFTUIFTJEFPSTFHNFOU

3. Setting the Illumination Mode of Your Sign

B&OTVSFBMMUIFTXJUDIFTBSFTFUUPUIF0òQPTJUJPO

b) Set SWT 2 and 3 to modify the relevant input state:

Function SWT2 SWT3

Program resting state (when no signalling inputs are active) 0ò 0ò

Signalling Input 1 active state On 0ò

Signalling Input 2 active state 0ò On

Signalling Input 1 and Input 2 active state On On

c) Set SWT 5 to On to indicate that you are about to set the Mode.

d) Set SWT 6 to 8 as follows:

Illumination Mode SWT6 SWT7 SWT8

On constantly 0ò 0ò 0ò

Flashing On 0ò 0ò

Pulsing On0ò 0ò

Follow mode** On On On

**Note: Follow mode can be assigned when both inputs are active. It will illuminate the

two halves of the sign according to the modes set for input 1 and input 2.

F4FU4850OBOESFUVSOJUUP0òUIJTTBWFTUIFJMMVNJOBUJPONPEF

SignalLED User Handbook

SIG NAL LED STUDIO I LLUMINATED SIG NS

SIG NAL LED STUDIO I LLUMI NATED SIG NS

SignalLED User Handbook

SIG NAL LED STUDIO I LLUMINATED SIG NS

SIG NAL LED STUDIO I LLUMI NATED SIG NS

310

There is a 3 step procedure to congure the sign for each particular input state, e.g. if

you want to set the sign to be a certain colour when signalling input 1 is used and then

to change colour when signalling input 2 is used, then you’ll need to go through this

procedure twice.

Important Note: If you are using a twin sign with signalling input 1 to control one side of the

sign and signalling input 2 to control the other side of the sign, you need to run through this

procedure three times:

1. To dene what happens when signalling input 1 is used.

2. To dene what happens when signalling input 2 is used.

3. To dene what happens when signalling inputs 1 & 2 are both used at the same time.

*OUIF4JHOBM-&%UIJTJTUSFBUFEBTBEJòFSFOUQSPHSBNNBCMFTUBUFBOETPJGZPVXBOUUIF

signs to react normally, this procedure would use the Follow Mode when conguring the

illumination modes.

1. Setting the Colour of Your Sign

B&OTVSFBMMUIFTXJUDIFTBSFTFUUPUIF0òQPTJUJPO

b) Set switches 2 and 3 to select the relevant input state, e.g. if you want to use Signalling

JOQVUUPDPOUSPMUIFTJHOUIFOTFUUIF485UP0OBOE485UP0ò

Function SWT2 SWT3

Program resting state (when no signalling inputs are active) 0ò 0ò

Signalling Input 1 active state On 0ò

Signalling Input 2 active state 0ò On

Signalling Input 1 and Input 2 active state On On

c) Set SWT 4 On to indicate that you are about to set the colour.

d) Set SWT 5 to 8 as follows:

Colour SWT5 SWT6 SWT7 SWT8

0ò 0ò 0ò 0ò 0ò

Red On 0ò 0ò 0ò

Green On0ò 0ò 0ò

Blue On On 0ò 0ò

Cyan 0ò 0ò On 0ò

Magenta On 0ò On 0ò

Yellow On On0ò 0ò

White On On On 0ò

Orange 0ò 0ò 0ò On

Dual colour mode* On On On On

*Note: Dual colour mode can be assigned when both inputs are active - it will illuminate

the two halves of the sign according to the colours set for input 1 and input 2 modes.

F4FU4850OBOESFUVSOJUUP0òUIJTTBWFTUIFDPMPVS

Sign Dimensions & Mounting Positions

The SignalLED sign consists of an aluminium centre section with plastic end mouldings

for each of the signs. The end mounting signs are fastened to a secure surface using a

slotted wall mount plate that locates into another hanger plate mounted in the SignalLED

assembly. The dimensions for the LED signs below include the mouldings and trim. Please

note that the mounting sizes are for reference only and should be checked with your

particular sign.

Fig 1: LD-40E1 Style Sign Dimensions (mm)

Fig 2: LD-40E1 Style Mounting Fig 3: Cable Routing Cut-Outs

Hole Positions (mm)

Mounting & Connecting The LD-40E1 Style Sign

The LED sign should be mounted on a at and rm solid surface. To assist the correct

mounting the sign is supplied with a mounting kit comprising 2 x wall plugs (for mounting

into brick, concrete, breeze block or stone) and 2 x large ange screws.

Note: You’ll need the following tools to mount the sign: an electric drill tted with a 6mm

diameter masonry drill bit, a No.1 Pozi-drive screwdriver and a spirit level.

Specyfikacje produktu

Marka:	Sonifex
Kategoria:	nieskategoryzowany
Model:	On Air Sign SingleFlush 20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sonifex On Air Sign SingleFlush 20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Sonifex

Sonifex AVN-GMCOS Instrukcja

16 Września 2024

Sonifex AVN-GMCS Instrukcja

16 Września 2024

Sonifex PC-AUR44 Instrukcja

16 Września 2024

Sonifex PC-DIG4 Instrukcja

16 Września 2024

Sonifex RB-MA1 Instrukcja

13 Września 2024

Sonifex S2-M6SS Instrukcja

13 Września 2024

Sonifex S2-MTB6 Instrukcja

13 Września 2024

Sonifex S2-ODPF Instrukcja

13 Września 2024

Sonifex S2-MB2 Instrukcja

13 Września 2024

Sonifex S2-CSGE Instrukcja

13 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024

Emko EZM-9920 Instrukcja

27 Października 2024

Emko ESM-3712-H Instrukcja

27 Października 2024

Emko ATS-10 Instrukcja

27 Października 2024

Emko EAOM-11.2 Instrukcja

27 Października 2024

Emko EPM-3790 Instrukcja

27 Października 2024

Emko EPM-7790 Instrukcja

27 Października 2024

Livarno Lux IAN 108340 Instrukcja

27 Października 2024

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024