Instrukcja obsługi Smeg ENH7170

Smeg piekarnik ENH7170

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Smeg ENH7170 (16 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Cat. No. / No de cat.

2554-20, 2555-20, 2555P-20

M12 FUEL™ IMPACT WRENCHES

CLÉS À CHOCS DE M12 FUEL™

LLAVES DE IMPACTO DE M12 FUEL™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specica-

tions provided with this power tool.

Save all

warnings and instructions for future reference.

WORK AREA SAFETY

• Keep work area clean and well lit.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust.

• Keep children and bystanders away while operat-

ing a power tool.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

• Do not expose power tools to rain or wet condi-

tions.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

• If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication.

• Use personal protective equipment. Always

wear eye protection.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool.

• Remove any adjusting key or wrench before

turning the power tool on.

• Do not overreach. Keep proper footing and

balance at all times.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts.

• If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power

tool for your application.

• Do not use the power tool if the switch does not

turn it on and o󰀨.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

• Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool.

• Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may a󰀨ect the power tool’s operation. If damaged,

have the power tool repaired before use.

• Keep cutting tools sharp and clean.

• Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer.

• Use power tools only with specically designated

battery packs.

Specyfikacje produktu

Marka:	Smeg
Kategoria:	piekarnik
Model:	ENH7170

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Smeg ENH7170, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje piekarnik Smeg

Smeg SPR36UIMAN Instrukcja

5 Lutego 2025

Smeg SPR24UIMAN Instrukcja

5 Lutego 2025

Smeg SF64M3S1PZB Instrukcja

2 Lutego 2025

Smeg APF6B-1 Instrukcja

12 Stycznia 2025

Smeg SRV573XG Instrukcja

12 Stycznia 2025

Smeg BG91CTN2 Instrukcja

11 Stycznia 2025

Smeg SFPA6390X2 Instrukcja

10 Stycznia 2025

Smeg SFPA6309X Instrukcja

10 Stycznia 2025

Smeg SFPA6390X Instrukcja

10 Stycznia 2025

Smeg SFA7390X Instrukcja

10 Stycznia 2025

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik

Whirlpool WOI4S8HM1SXA Instrukcja

25 Marca 2025

AEG NBU5A20SB Instrukcja

24 Marca 2025

AEG NBU5P40BCK Instrukcja

24 Marca 2025

AEG TA5PB53WAB Instrukcja

24 Marca 2025

AEG OU5AE20AK Instrukcja

24 Marca 2025

AEG TU5AB20SCK Instrukcja

24 Marca 2025

AEG TB8SB631AB Instrukcja

24 Marca 2025

AEG TU5PB40NCK Instrukcja

24 Marca 2025

AEG TU5PB40NSK Instrukcja

24 Marca 2025

AEG TR6PB531SB Instrukcja

24 Marca 2025