Instrukcja obsługi Smart-AVI DVS-200

Smart-AVI Niesklasyfikowane DVS-200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Smart-AVI DVS-200 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
2-Port DVI-D
CAT5/5e/6 STP Extender
Quick Start Guide
VIDEO
Format DVI (Single Link)
Input Interface (1) DVI, (1) DVI (local monitor)
Resolution Up to 1920 x 1200 @ 60 Hz
OTHER
Power PS5VDC2A
Dimensions 3.75” W x 5” L x .875” H
Operating Temp. +32 to +104°F (0 to +40°C)
Storage Temp. -4 to 140°F (-20 to +60°C)
Humidity Up to 95% (non-condencing)
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
888.994.7427, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
DVS-200
WHAT’S IN THE BOX
PART NO. DESCRIPTIONQ-TY
DVS-200 1 2-Port DVI-D CAT5/5e/6 STP
Transmitter
DVX-RX200 1 DVI-D/PC CAT5/5e/6 STP
Receiver
Power Supply 2 PS5VDC2A
Quick Start Guide 1
OVEVIEW
DVS-200 extends any DVI-D signal up to 220 ft to two
displays and one local screen using Cat5/5e/6 cabling
while retaining perfect image quality at resolutions up to
1920 x 1200. SmartAVI, Inc.’s DVS-200 allows you to
extend a DVI-D signal to up to two remote displays via one
small unit that also loops a signal back to your computer so
local monitoring is possible and simple.
A great example would be a retail shop running its digital
signage from a computer in its back ofce; using the
DVS-200, a media le or group of les could be broadcast
to up to two screens situated around the store while also
being viewed locally on that computer’s monitor.
Quite simply, the outgoing DVI-D signal from your computer
is plugged into the DVS-200. This box has one input and
two outputs, so that your signal can be sent up to 220 ft
over inexpensive CAT5/5e/6 cables to display screens
anywhere in your retail shop, lounge, etc. In addition to the
two outgoing signal ports, the unit also has a loop-back port
that goes back to your computer, so that you may monitor
exactly what is being broadcast to the remote screens. This
is all done from a single unit with one power supply.
On power-up, the DVS-200 reads and stores the EDID of
the DVI monitor connected to the local loop-back port. From
that point on, even if the local monitor is not attached to
the unit, its DDC is retained in the ash memory of the
DVS-200 unit and it will operate as if the monitor were
connected, offering unhindered use and simple exibility
FEATURES
• Local DVI output.
• Perfect image quality at all resolutions
• Video resolutions up to 1920 x 1200 @ 60Hz
(1280 x 1024 @ 75Hz) on all distances to the
maximum limit
• Automatic DDC learning from local monitor
• DDC tables stored in ash memory for future use
• Unit operates regardless of local monitor
connectivity
• Distances: up to 220 ft via STP CAT5/5e/6 cable
(best quality / distance)
• Compatible with all operating systems
• Rack mount options(19”): mount up to four DVS400
units in a 19”/1U rack mount kit, saving expensive
rack space
• MAC or PC versions available
1. Turn off computer and monitor.
2. Connect DVI male to male cable between the computer and the transmitter.
3. Connect monitor or projector to the local loopback DVI port on the transmitter.
4. Turn on the monitor.
5. Plug in one of the power transformers and connect it to the transmitter.
6. Remove the monitor from the local loopback DVI port on the transmitter and connect it to the DVI port on the receiver.
7. Connect a shielded CAT5/5e/6 cable between port 1 on the transmitter and port 1 on the receiver.
8. Plug in the other power transformer and connect it to the receiver.
9. Turn on the computer.
HARDWARE INSTALLATION
DVS-200 FRONT DVS-200 BACK
DVI IN
DVI OUT
CAT5/5e/6
220 ft
DVS-200-TX DVS-200-RX

Specyfikacje produktu

Marka: Smart-AVI
Kategoria: Niesklasyfikowane
Model: DVS-200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Smart-AVI DVS-200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Smart-AVI

Smart-AVI

Smart-AVI SM-UHO-8P Instrukcja

7 Października 2024
Smart-AVI

Smart-AVI UHDN-4P-Quad Instrukcja

7 Października 2024
Smart-AVI

Smart-AVI DPN-4duo Instrukcja

7 Października 2024
Smart-AVI

Smart-AVI HDMV-8X Instrukcja

7 Października 2024
Smart-AVI

Smart-AVI DVS2PS Instrukcja

7 Października 2024
Smart-AVI

Smart-AVI DVS-200 Instrukcja

4 Października 2024
Smart-AVI

Smart-AVI DVNET-16Pro Instrukcja

4 Października 2024
Smart-AVI

Smart-AVI V2V-HDAV Instrukcja

4 Października 2024
Smart-AVI

Smart-AVI FDX-2500 Instrukcja

3 Października 2024
Smart-AVI

Smart-AVI SMCVG2DVI Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024