Instrukcja obsługi Skytec SPL-1000

Skytec odbiornik SPL-1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Skytec SPL-1000 (14 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
STEREO POWER AMPLIFIER
WITH MP3
SPL 300MP3
SPL 500MP3
SPL 700MP3
SPL 1000MP3
SPL 1500MP3
SPL 2000MP3
Instruction Manual
Gebruiksaanwijzing
SPL–MP3 SERIES - 2 -
Gebrauchsanleitung
Basis aansluiting /Basic connections /
Grundanschlüsse :
SPL–MP3 SERIES - 3 -
UK
Congratulations to the purchase of our SPL Amplier.
Read the instructions thoroughly prior to using the
unit.
SAFETY INSTRUCTIONS
• Hearing damage:
Loudspeakers are easily generating high sound
pressure levels (SPL) sucient to cause permanent
hearing damage to performers, production crew and
audience members. Care should be taken to avoid
prolonged exposure to SPL in excess of 85 dB.
• Make sure that the amplier is switched o when the
speaker box is connected or disconnected.
• Do not overload the amplier or speakers to avoid
damage to the components.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
• Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit will not be used
for a longer period of time, unplug it from the mains.
The rule is: Unplug it from the mains when not in
use.
• If the unit has not been used for a longer period of
time, condensation may occur. Let the unit reach
room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.
• During operation, the housing becomes very hot. Do
not touch it during operation and immediately after.
• Do not use cleaning sprays to clean the switches.
The residues of these sprays cause deposits of dust
and grease. In case of malfunction, always seek
advice from a specialist.
• Do not force the controls.
• Do not place an open re (candle, etc.) on top or
next to the box - FIRE HAZARD
• Make sure that the amplier is placed on a stable,
solid surface.
• Do not place liquids on the amplier and protect it
against humidity. Humidity can shorten the life time
considerably.
• If the unit is damaged to an extent that internal parts
are visible, DO NOT connect the unit and DO NOT
switch it on. Contact your dealer.
• Never try to repair the unit yourself. It does not
contain any user serviceable parts. All repairs must
be carried out by a qualied technician.
• Set the amplier to the lowest volume prior to
switching it on.
• Keep the unit out of the reach of children.
• Switch the unit o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the unit.
• Make sure that the mains lead cannot be damaged
when people walk on it. Check the mains lead before
every use for damages and faults!
Protect your environment. Recycle packing
material whenever possible.
Do not throw a faulty unit into normal household waste
but bring it to a special collection point. A
large part of it can be recycled.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to
the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused
by inappropriate use or disrespect of the warnings contained in this manual. SPL cannot be held responsible for personal
injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in
whatever form.
CONNECTIONS
First of all, check the specications of the amplier if it is suitable for your speaker boxes. Pay particular attention
to the power rating and impedance. Check if the amplier is switched o. If yes, you can switch on the speakers.
PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same sign of every
side i.e. the + of the amplier must be connected to the + of the speaker box. If the connections are inverted, the
sound quality will diminish. Only use high quality speaker cables that are suitable for the power and distance
between the amplier and the speaker.
LAYOUT

Specyfikacje produktu

Marka: Skytec
Kategoria: odbiornik
Model: SPL-1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Skytec SPL-1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Skytec

Skytec

Skytec SPL500EQ Instrukcja

18 Września 2024
Skytec

Skytec SPL-700 Instrukcja

17 Września 2024
Skytec

Skytec SPL-1500EQ Instrukcja

16 Września 2024
Skytec

Skytec SPL400 Instrukcja

14 Września 2024
Skytec

Skytec SPL-300MP3 Instrukcja

13 Września 2024
Skytec

Skytec SPL700 Instrukcja

13 Września 2024
Skytec

Skytec LED Instrukcja

12 Września 2024
Skytec

Skytec SPL1000 Instrukcja

11 Września 2024
Skytec

Skytec SPL-2000EQ Instrukcja

11 Września 2024
Skytec

Skytec PRO-240 Instrukcja

11 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024