Instrukcja obsługi Singer ER-10

Singer maszyna do szycia ER-10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Singer ER-10 (12 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

ER10

Instruction Manual

34074 Singer ER10 Manual.indd 1 6/30/08 10:00:29 AM

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594

When using an electrical appliance, basic safety precautions should always be followed, including

the following:

Read all instructions before using this household sewing machine.

• A sewing machine should never be left unattended when plugged in. Always unplug this

sewing machine from the electric outlet immediately after using and before cleaning.

• Always unplug before relamping. Replace bulb with same type rated 15 Watt.

• Do not allow to be used as a toy. Close attention is necessary when this sewing machine is

used by or near children and in rm persons.

• Use this sewing machine only for its intended use as described in this manual. Use only

attachments recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working

properly, if it has been dropped or damaged, or dropped into water. Return the sewing

machine to the nearest authorized dealer or service center for examination, repair, electrical or

mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation openings

of the sewing machine and foot controller free from the accumulation of lint, dust, and loose

cloth.

• Keep  ngers away from all moving parts. Special care is required around the sewing machine

needle.

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may de ect the needle causing it to break.

• Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as

threading needle, changing needle, threading bobbin, or changing presser foot, etc.

• Always unplug sewing machine from the electrical outlet when removing covers, lubricating,

or when making any other user servicing adjustments mentioned in the instruction manual.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being

administrated.

• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• The sound pressure level under normal operating conditions is 70dB(A).

34074 Singer ER10 Manual.indd 2 6/30/08 10:00:30 AM

Table of Contents .......................................... 3

Overview of the machine .............................3

Accessories ...................................................... 4

Setting Up ........................................................ 4

Attaching the power cord and foot control 4

Machine speed ............................................... 4

For the USA and Canada .............................. 4

Cloth Presser ................................................... 5

Getting Started ............................................... 6

Fabric and trims that can be used ................ 6

Laundering embellished projects ................. 6

NOTE: Laundering rules of

“pre-washing”: ................................................ 6

Start Embellishing .......................................... 7

Flat Bed Extension / Free Arm................... 8

Accessory Storage .......................................... 8

Maintenance .................................................... 9

Changing the needle(s) ................................. 9

Replacing the light bulb...............................10

Cleaning the lint box ....................................10

Trouble Shooting .........................................11

Needle bent or Needle breakage ..............11

Speci cations ................................................ 11

1. Handwheel

2. Socket for foot control

3. Power switch

4. Needle clamp holder

5. Needle plate

6. Flat Bed Extension

7. Accessory storage

8. Cloth presser height adjusting screw

9. Clear fabric cover with needle guard

10. Connection socket

34074 Singer ER10 Manual.indd 3 6/30/08 10:00:31 AM

Specyfikacje produktu

Marka:	Singer
Kategoria:	maszyna do szycia
Model:	ER-10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Singer ER-10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje maszyna do szycia Singer

Singer 4166 Instrukcja

11 Stycznia 2025

Singer HD6335M Instrukcja

6 Stycznia 2025

Singer 3333 Instrukcja

31 Grudnia 2025

Singer HD6330M Instrukcja

31 Grudnia 2025

Singer M1005 Instrukcja

31 Grudnia 2025

Singer Ditto Instrukcja

24 Grudnia 2024

Singer 20E Instrukcja

24 Grudnia 2024

Singer 457K Instrukcja

24 Grudnia 2024

Singer 22 Instrukcja

24 Grudnia 2024

Singer 191E Instrukcja

24 Grudnia 2024

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Pfaff 463H Instrukcja

15 Stycznia 2025

Elna Lotus ZZ Instrukcja

14 Stycznia 2025

Brother Aveneer EV1-LE Instrukcja

14 Stycznia 2025

Brother Aveneer EV1 Instrukcja

14 Stycznia 2025

Necchi Maximatic 586 Instrukcja

12 Stycznia 2025

Juki MS-1190 Instrukcja

12 Stycznia 2025

Pfaff 295-1 Instrukcja

12 Stycznia 2025

Brother Innov-is NV-180 Instrukcja

12 Stycznia 2025

Baby Lock Imagine 2 Instrukcja

12 Stycznia 2025

Alfa 1412 Instrukcja

11 Stycznia 2025