Instrukcja obsługi Singer EM9305

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Singer EM9305 (68 stron) w kategorii Naaimachine. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/68
USER’S GUIDE
EM9305
This household embroidery machine is designed to comply with IEC/EN/CSA C22.2 No. 60335-1
& 60335-2-28 and UL1594.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including
the following:
Read all instructions before using this household embroidery machine. Keep the instructions in a
suitable place close to the machine. Make sure to hand them over if the machine is given to a third
party.
DANGER – To reduce the risk of electric shock:
• An embroidery machine should never be left unattended when plugged in. The electrical socket,
to which the machine is plugged in should be easily accessible. Always unplug this embroidery
machine from the electric outlet immediately after using and before cleaning, removing covers,
lubricating or when making any other user servicing adjustments mentioned in the instruction
manual.
WARNING – To reduce the risk of burns, re, electric
shock, or injury to person:
• Do not allow to be used as a toy. Close attention is necessary when this embroidery machine is
used by or near children.
• Use this embroidery machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
• Never operate this embroidery machine if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the embroidery
machine to the nearest authorized dealer or service center for examination, repair, electrical or
mechanical adjustment.
• Never operate the embroidery machine with any air openings blocked. Keep ventilation openings
of the embroidery machine free from the accumulation of lint, dust, and loose cloth.
• Keep ngers away from all moving parts. Special care is required around the embroidery
machine needle.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push fabric while stitching. It may deect the needle causing it to break.
• Wear safety glasses.
• Switch the embroidery machine off (“0”) when making any adjustment in the needle area, such
as threading needle, changing needle, threading bobbin, or changing presser foot, etc.
• Never drop or insert any object into any opening.
• Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being adminis-
trated.
• To disconnect, turn all controls to the o (“0”) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not use the machine if it is wet.
• If the LED lamp is damaged or broken, it must be replaced by the manufacturer or it's service
agent or a similarly qualied person, in order to avoid a hazard.
SAVE THESE INSTRUCTIONS
FOR CENELEC COUNTRIES ONLY:
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
The noise level under normal operating conditions is less than 75dB(A).
FOR NON CENELEC COUNTRIES:
This embroidery machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the embroidery machine by a person
responsible for their safety. Children should be supervised to ensure that they do not play with
the embroidery machine.
The noise level under normal operating conditions is less than 75dB(A).

Specyfikacje produktu

Marka: Singer
Kategoria: Naaimachine
Model: EM9305

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Singer EM9305, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Naaimachine Singer

Singer

Singer HD6605C Instrukcja

22 Września 2024
Singer

Singer SE300 Instrukcja

22 Września 2024
Singer

Singer 3232 Instrukcja

22 Września 2024
Singer

Singer S10 Instrukcja

22 Września 2024
Singer

Singer M3005 Instrukcja

22 Września 2024
Singer

Singer EM9305 Instrukcja

22 Września 2024
Singer

Singer 5400 Instrukcja

22 Września 2024
Singer

Singer 44S Instrukcja

22 Września 2024
Singer

Singer Stylist 4060 Instrukcja

21 Września 2024
Singer

Singer 14U236 B Instrukcja

16 Września 2024

Instrukcje Naaimachine

Najnowsze instrukcje dla Naaimachine