Instrukcja obsługi Singer C5650


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Singer C5650 (40 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
INSTRUCTION MANUAL
C5650 / C5655
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this household sewing machine.
When using an electrical appliance, basic safety precautions should always be followed, including the
following:
Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the
machine is given to a third party.
This appliance is intended for use by adults. The appliance can be used with adult supervision by (i)
children aged from 8 to 12 years and (ii) persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given instruction concerning use of the appliance in a
safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children
without supervision. It is not allowed for anyone to play with the machine.Children up to 8 years are not
allowed to use the machine.
WARNINGTO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSON:
A sewing machine should never be left unattended when plugged in. The electrical socket, to which the
machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric
outlet immediately after using and before cleaning, removing covers, lubricating or when making any other
user servicing adjustments mentioned in the instruction manual.
Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children.
Use this sewing machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.
Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer
or service center for examination, repair, electrical or mechanical adjustment.
Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing
machine and foot control free from the accumulation of lint, dust, and loose cloth.
Keep ngers away from all moving parts. Special care is required around the sewing machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may deect the needle causing it to break.
Wear safety glasses.
Switch the sewing machine o (“0”) when making any adjustment in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot, etc.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.
To disconnect, turn all controls to the o (“0”) position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
The foot control is used to operate the machine. Never place other objects on the foot control.
Do not use the machine if it is wet.
If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a
similarly qualied person, in order to avoid a hazard.
If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualied person, in order to avoid a hazard.
The machine must only be used with foot control of type JF-1000 manufactured by Jaguar International
Corporation or YC-485EC manufactured by Taiwan Yamamoto Electric Corp.
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding. No ground means
is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing
of a double-insulated product requires extreme care and knowledge of the system and should be done only by
qualied service personnel. Replacement parts for a double-insulated product must be identical to those parts
in the product. A double-insulated product is marked with the words ‘DOUBLE INSULATION or ‘DOUBLE
INSULATED’.


Specyfikacje produktu

Marka: Singer
Kategoria: maszyna do szycia
Model: C5650

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Singer C5650, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje maszyna do szycia Singer

Singer

Singer 6136 Instrukcja

15 Października 2024
Singer

Singer 974 Instrukcja

15 Października 2024
Singer

Singer White 1033 Instrukcja

12 Października 2024
Singer

Singer 2502 Instrukcja

11 Października 2024
Singer

Singer M2600 Instrukcja

6 Października 2024
Singer

Singer M2500 Instrukcja

6 Października 2024
Singer

Singer Scholastic 5511 Instrukcja

4 Października 2024
Singer

Singer M3305 Instrukcja

1 Października 2024
Singer

Singer S0105 Instrukcja

1 Października 2024
Singer

Singer C5650 Instrukcja

30 Września 2024

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Bernina

Bernina 1130 Instrukcja

15 Października 2024
Bernina

Bernina Artista 640 Instrukcja

15 Października 2024
Bernina

Bernina aurora 440 Instrukcja

15 Października 2024
Bernina

Bernina Activa 125 Instrukcja

15 Października 2024
Bernina

Bernina 570 QE Instrukcja

15 Października 2024
Bernina

Bernina 717 Instrukcja

15 Października 2024
Bernina

Bernina B550QE Instrukcja

15 Października 2024
Bernina

Bernina Activa 240 Instrukcja

15 Października 2024
Bernina

Bernina 580 Instrukcja

15 Października 2024
Bernina

Bernina Bernette 15 Instrukcja

15 Października 2024