Instrukcja obsługi Siemens WM14Q3E0DN

Siemens pralka WM14Q3E0DN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Siemens WM14Q3E0DN (16 stron) w kategorii pralka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
1 2 3 4 5 6
End of programme when ...
... (Start/Reload) flashes and appears on the display panel.- -¯
Note: If display panel lighting is switched off, press any button Energy a
saving mode, .page 5
Interrupting the programme
Programmes at high temperatures:
Cool washing: Select Centrifugering ( /Spin).Skyl/ Rinse
Press ( Reload).Start/
Programmes at lower temperatures:
Select Skyl/Centrifugering (Rinse ) (deactivate/Spin vü(Water plus)
button) or .Udpumpning (Empty)
Press ( Reload).Start/
Changing the programme if ...
... you have selected the wrong programme by mistake:
Reselect the programme.
Press ( Reload). The new programme starts from the Start/
beginning.
Reloading laundry if ... apage 5
... Press (Start/ ); Reload § is displayed on the display panel. If ǯ
is lit, the washing machine door cannot be opened.
Press ( Reload).Start/
Correct installation according to the separate
installations actions.
Checking the machine
Never use a damaged machine!
Contact customer service!
Connecting the mains plug
Make sure your hands are dry!
Handle the plug only!
Turning on the tap
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load .aPage 7
Observe important information! Page 6a
Wash laundry of different sizes in the same wash programme.
Close the door. Take care not to trap items of laundry between the washing machine door and
seal.
Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your water supply company) and
manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Your washing machine
Congratulations on having opted for a modern, high-quality domestic appliance
manufactured by Siemens. This washing machine is distinguished by its economical
energy consumption.
Each machine that leaves our factory has been inspected thoroughly to ensure that it
functions properly and is in perfect condition.
For further information on our products, accessories, spares and services, consult our
website www.siemens-home.com or contact any of our customer service centres.
You can find the contact details for your nearest after-sales service here or in the after-
sales service directory (depending on model).
0844 8928999GB (calls from a BT landline will be charged at up to 3 pence
per minute. A call set-up fee of up to 6 pence may apply)
01450 2655IE
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with environmental guidelines.
This appliance is certified in accordance with European Directive 2002/96/CE on the
waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and reuse of used
appliances.
Intended use
Contents Page
ʋIntended use .......................................................................................1
ʋProgrammes ........................................................................................1
ʋSetting and adjusting the programme ...........................................3
ʋWashing ...........................................................................................3/4
ʋAfter washing ......................................................................................4
ʋIndividual settings ..........................................................................5/6
ʋImportant information ....................................................................... 6
ʋOverview of programmes ................................................................7
ʋSafety instructions .............................................................................8
ʋConsumption values .........................................................................8
ʋCare and cleaning .............................................................................9
ʋInformation on the display panel ....................................................9
ʋMaintenance .................................................................................... 10
ʋWhat to do if ... ................................................................................ 11
Protection of the environment/Conservation tips
Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
Wash normally soiled laundry without a pre-wash.
Instead of Bomuld (Cottons) 90 °C, choose the programme
Bomuld (Cottons) 60 °C with the additional function
ecoPerfect j. Comparable cleaning result was significantly
lower energy consumption.
Measure the detergent according to the manufacturer's
instructions and water hardness.
If the laundry is then dried in the tumble dryer, select spin speed
according to instructions of dryer manufacturer.
Preparation Before the first wash,
run a wash cycle with no laundry in the machine aPage 9.
Setting** and adjusting programmes
Programmes
Detailed overview of programmes .apage 7
Spin speed can be selected individually, irrespective of the
selected programme and programme progress.
Bomuld (Cottons) hard-wearing fabrics
+ Forvask (Prewash) hard-wearing fabrics, prewash
Mix Different types of laundry
superLyn 15
(Super Quick) Short programme
Skyl/Centrifugering
(Rinse/Spin) Laundry washed by hand, vü(Water plus) button
activated; if only using the spin cycle, deactivate the but-
ton
Udpumpning (Empty) Drain rinsing water with (without final spin)c
ÿ Uld-/håndvask
(Wool) Hand/machine washable wool
Finvask
(Delicate/Silk)
Delicate washable fabrics
Strygelet (Easy-Care) synthetic fabrics Washing
1
2
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: turn the programme selector to
Udpumpning (Empty) or select the spin speed.
Choose (Start/Reload).
Remove any foreign objects. Risk of rusting.
Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models aRefer to Installation instructions.
Switching off
Turn the programme selector to .Fra (Off)
Washing
Compartment ~: Fabric softener, bleach
Compartment I: Detergent for prewash
ʋfor domestic use only,
ʋfor washing machine-washable fabrics and
hand-washable wool in detergent solution,
ʋto be operated with cold or cold and hot (max. 60 ºC)
drinking water, depending on model, and commercially
available detergents and care products which are suit-
able for use in washing machines.
.
Do not leave children unattended near the
washing machine.
The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Individual settings
ʑOption button (Ready in)
When a programme is selected, its duration is displayed. You can delay the end of the programme before it begins. The
ready in-time can be set in increments of one hour up to a maximum of 24 hours. Press the (Ready in) button until
the required number of hours is displayed (h = hour). Choose (Start/Reload). Once the programme has begun, no
further adjustment is possible.
ʑSpin speed in rpm/ (without final spin)
You can change the displayed spin speed or choose (without final spin, laundry soaks in the last rinsing water,
display panel - - - . The maximum selectable spin speed depends on the model and which programme is currently )
selected.
ʑAdditional functions aOverview of programmes, page 7
speedPerfect For washing in a shorter time with a washing outcome comparable to that of the i
standard programme. Maximum load Overview of programmes,a page 7.
ecoPerfect For saving energy with a washing performance comparable to that of the standard j
programme.
S(Reduced Ironing) Special spin sequence with subsequent fluffing. Gentle final spin: residual moisture in
the laundry slightly increased.
vü(Water plus) Increased water level and additional rinse cycle, extended washing time. For areas
with very soft water or for further enhancing the spin result.
ʑChildproof lock
ª¥in the display panel You can lock the washing machine to prevent the functions you have set from being
changed inadvertently.
To activate: press and hold the ( Reload) button for approx. 5 seconds after Start/
the programme has started. appears in the display panel for approx. 5 seconds, ª¥
then the Finish-in time is shown again.
To deactivate Start/: press and hold the (Reload) button for approx. 5 seconds.
Note: If a button is pressed when the childproof lock is active, ª ¥ lights up for
approx. 5 seconds, then the Finish-in time is displayed again.
ª¥lights up continouously if the programme selector is adjusted when the Childlock
is active.
ʑReloading
§
in the display panel
Press (Start/ ) if you want to add additional items of laundry after the Reload
programme has started. The machine checks whether reloading is possible.
§ lits: reloading is possible.
ǯ § flashes: wait until lights.
Note: do not open the door until is lit.§
ǯ: it is not possible to reload.
Note: for safety reasons, the washing machine door remains locked when the water
level and/or temperature is high, or during spinning.
To continue the programme, press the ( Reload)Start/ button.
ʑEnergy saving mode
The display panel lighting goes out after a few minutes, ( ) flashes. Press any button to switch on the Start/Reload
lighting.
ʑ (Start/Reload)
To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock.
Individual settings
z
ʑSignal
Important information
Protecting the laundry and the machine
When determining the dosage of all washing powders, additives and cleaning agents, you must follow the
manufacturer's instructions..
Empty all pockets
Check for metal items (paper-clips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additional function .speedPerfecti
Pre-treat any stains as necessary.
intense wash Load less laundry. Choose a programme with a prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment in accordance with the manufacturer's instructions. Turn the II
programme selector to and press ( Reload). After approx. 10 minutes, press Bomuld (Cottons) 30 °CStart/
(Start/ ) to pause the programme. Once the required soaking time has elapsed, press (Reload Start/Reload)again to
continue the programme, or select a different programme.
Starch Laundry should not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the
manufacturer's instructions into fabric softener compartment (rinse first if necessary).~
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's instructions. Do use the washing machine for bleaching clothes.not
Insert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
 Remove the detergent drawer completely apage 9
 Slide the insert forwards and click into place.
Do not use the insert (slide upwards): for gel detergents and washing powder,
for programmes with + Forvask (Prewash) and End time option.
Set to o1 step, the display
panel lights up
press and
hold +1 step, release
set to o
setting the
volume*
setting the
volume*
1 step
* if necessary, select the function several times
1. Activating the mode
for setting the signal
volume
2. Setting the volume
for...
Button signals Information signals
direct
3
Detergent drawer with
compartments , , III~
Door
Drum
Control panel
Service door
Display panel /
option buttons
Additional functions Start /
Reload
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction.
**If flashes in the display panel, ª¥
the childproof lock is active
a Deactivate childproof lock,
page 5.
Additional functions and option
buttons aIndividual settings,
page 5.
Press (Start/Reload)
All buttons are sensitive and need
only to be touched lightly. Press and
hold the (Ready in) option button
for an automatic run through all
setting options.
Programme selector
1 2 3 4 5 6
Insert for liquid detergent (depending on model) apage 6
1 2 3 4 5 6
1 - 24
(Ready in)
End of programme after ...
Status displays Programme sequence displays:
1 2üc- -¯ Wash, rinse, spin, end
without final spin
ª¥ Childproof lock apage 5
7
Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.
Programmes °C max. Type of laundry Additional functions; Information
Bomuld
(Cottons) 30, 40, 60, 90 °C 7 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be
washed at 90°C speedPerfect *, ecoPerfect ,i j S(Reduced Ironing), vü(Water plus)
+ Forvask
(Prewash) 40 °C
Strygelet
(Easy-Care) 3.5 kg
easy-care cotton, linen, synthetic or blended fabrics speedPerfect , ecoPerfect , (Reduced Ironing), i j S vü(Water plus)
30, 40, 60 °C
Mix 40 °C cotton or synthetic fabrics speedPerfect , ecoPerfect i j S, (Reduced Ironing), (Water plus);vü
different types of laundry can be washed together
Finvask
(Delicate/Silk) 30 °C
2 kg
for delicate fabrics, e.g., silk, satin, synthetic fibres
or blended fabrics (e.g. curtains)
speedPerfect , ecoPerfect , i j S(Reduced Ironing), vü(Water plus):
no spin between rinse cycles
ÿ Uld-/hånd-
vask (Wool)
Koldt (cold),
30 °C hand/machine washable wool particularly delicate wash programme to avoid shrinkage of laundry;
longer programme breaks (fabrics rest in the detergent solution)
superLyn 15
(Super Quick) 30 °C synthetic cotton, linen, synthetic fibres or blended
fabrics
short programme of approx. 15 minutes,
suitable for lightly soiled laundry
Additional programmes Skyl/Centrifugering (Rinse/Spin), Udpumpning (Empty)
*reduced load with additional function .speedPerfect i
For programmes without prewash, add detergent to compartment . For prewash programmes, distribute the detergent between compartments and II I II.
9205 / 9000639573
9000639573 WM14Q3E0DN /...
Siemens Electrogeräte GmbH
Carl Wery Str. 34ä
81739 Munich / Germany
8
Safety instructions
Carefully read the instruction manual and the information enclosed, and act accordingly.
Keep the machine's documentation for future reference.
Risk of electric shock! Never pull the cable to disconnect the mains plug!
Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning! Keep detergents and care products out of the reach of children.
Risk of explosion! Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! The washing machine door may become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity Water*** *** Programme
duration***
Bomuld 30 °C* 7 kg 0.39 kWh 66 l 145 min
Bomuld 40 °C* 7 kg 1.02 kWh 66 l 155 min
Bomuld 60 °C* 7 kg 1.15 kWh 66 l 165 min
Bomuld 90 °C 7 kg 2.10 kWh 76 l 155 min
Strygelet 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mix 40 °C 3.5 kg 0.54 kWh 47 l 60 min
Finvask/Silke 30 °C 2 kg 0.19 kWh 34 l 41 min
Uld-/håndvask 30 °C 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional
function Load Annual energy
consumption
Annual water
consumption
Bomuld 40/60 °C ecoPerfect ** 7/3.5 kg 174 kWh 8140 l j
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Care and cleaning
Before the first wash
Do not put laundry in the machine! Turn on the tap. Put into compartment II
I
I
II:
approx. 2 litres of water
detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)
Turn the programme selector to Strygelet (Easy-Care) 60 °C and press ( Reload)Start/ . At the end of the programme,
turn the programme selector to Fra (Off).
.
.
..
Machine housing, control panel
Remove detergent and cleaning agent residue.
Wipe with a soft, damp cloth.
Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down and remove drawer completely.
2. To remove the insert: press upwards from below with your finger.
3. For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the
manufacturer's instructions. Descaling products can be acquired on the website or from customer services aInstallation
instructions.
Emergency release e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Fra (Off) and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
The washing machine door can then be opened.
Information on the display panel depending on model
§ ³±: Close the washing machine door properly; laundry may be caught.
§ ³Å: ,
§ É:Turn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10, water pressure too low.
§ ³µ: Detergent solution pump blocked; Clean the detergent solution pump apage 10.
Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon .apage 10
Heavy foam build-up , status indicator flashes.apage 11 1
§ ´:Water in the base tub, appliance leaking. Call customer services!
© ³¯: Open the (hot water) tap fully.
Inlet hose kinked/trapped.
Water pressure too low. Clean the filter .apage 10
Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first
wash cycle.
ª¥ Childproof lock activated: to deactivate a page 5.
Risk of electric shock! Disconnect the mains plug.
Do not use solvents.Risk of explosion!
9
10
Maintenance
Detergent solution pump
Turn the programme selector to and disconnect Fra (Off)
the mains plug.
1. Using a screwdriver or the insert for liquid detergent
(depending on model), open and remove the service flap.
2. Remove the folding gutter and place a large enough container underneath.
3. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing.
Remove the sealing cap, allow the detergent solution to flow out into the container. Replace
the sealing cap and place the drainage hose in the retainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the
detergent solution begins to flow out on the folding gutter. When the container is full, close
the pump cover and empty the container. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residual water).
5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and the folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 2 litres of water into compartment and then start the programme.II Udpumpning (Empty)
Drainage hose at the siphon
Turn the programme selector to and disconnect the mains plug.Fra (Off)
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Skyl/Centrifugering (Rinse/Spin) // Udpumpning
(Empty)).
3. Choose ( Reload). Let the programme run for approximately 40 seconds.Start/
4. Turn the programme selector to Fra (Off). Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
Risk of burning!
Allow the detergent solution to cool.
Turn off the tap.
11
What to do if...
ʑWater is leaking out Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
(Start/Reload) not selected?
Tap not turned on?
Filter blocked? Clean the filter apage 10.
Supply hose kinked or trapped?
ʑThe appliance door will not
open.
Safety function active. Programme stopped? apage 4.
(without final spin) selected? apage 3, 4.
Can be opened by emergency release only? apage 9.
Door locked after the washing machine is switched off: Switch on the washing
machine and wait for 5 seconds.
ʑThe selected programme does
not start.
(Start/Reload (Ready in)) or time selected?
Washing machine door closed?
Childproof lock active? Deactivate apage 5.
ʑDetergent solution is not
drained.
(without final spin) selected? apage 3, 4.
Clean the detergent solution pump apage 10.
Clean the waste pipe and/or drainage hose.
ʑNo water can be seen in the
drum.
Not a fault. Water remains inside below the visible area.
ʑSpin result not satisfactory.
Laundry wet/too damp.
Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of
laundry.
Distribute large and small items of laundry evenly in the drum.
S(Reduced Ironing) selected? apage 5.
Selected speed too low? apage 5.
ʑProgramme duration changes
suddenly during operation.
Not a fault. The program time can vary according to the distribution of laundry, with
it therefore being possible for the display panel to show adjustments in the
duration.
ʑSpin cycle performed several
times.
Not a fault. The balance control system has detected an imbalance and is
attempting to redress this by repeating the spin.
ʑResidual water in the
compartment for care products.
Not a fault: the action of the care product is not affected.
Clean the compartment if necessary apage 9.
ʑOdour formation in the washing
machine.
Run programme Bomuld (Cottons) 90 °C without laundry. Use standard
detergent.
ʑStatus display 1 flashing.
Appliance has detected a
detergent overload.
Too much detergent used?
If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
Reduce the detergent dosage for the next wash cycle.
ʑIntense noise formation,
vibrations and "wandering"
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑDisplay panel/indicator lamps
remain turned off while the
machine is working.
Energy-saving mode apage 5.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑProgramme sequence longer
than usual.
Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly
distributing the laundry.
Not a fault: foam detection system active; adds an additional rinse cycle.
ʑDetergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-insoluble residues.
 Select Skyl/Centrifugering (Rinse/Spin) or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repair is necessary:
Turn the programme selector to Fra (Off) and remove the mains plug from the socket.
Turn off the water supply and call customer services aInstallation instructions.
Instructions for use
Washing
Machine
Observe the safety
instructions on
page 8!
Read these instructions and the separate installation
instructions before operating the washing machine.
en

Specyfikacje produktu

Marka: Siemens
Kategoria: pralka
Model: WM14Q3E0DN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Siemens WM14Q3E0DN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje pralka Siemens

Siemens

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024
Siemens

Siemens WG44G20B Instrukcja

9 Października 2024
Siemens

Siemens WG56B2AC Instrukcja

9 Października 2024
Siemens

Siemens WM16S743NL Instrukcja

9 Października 2024
Siemens

Siemens WG44A2A0GC Instrukcja

7 Października 2024
Siemens

Siemens WM14A160 Instrukcja

7 Października 2024
Siemens

Siemens WG46G2Z1GB Instrukcja

7 Października 2024
Siemens

Siemens WG56G2Z1GB Instrukcja

7 Października 2024
Siemens

Siemens WG56G2Z0GB Instrukcja

7 Października 2024
Siemens

Siemens Siwamat xl 1460 Instrukcja

7 Października 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy

Candy CS 15102D3-80 Instrukcja

15 Października 2024
GE

GE GSD3715FAA Instrukcja

15 Października 2024
LG

LG WTP22BK Instrukcja

15 Października 2024
Freggia

Freggia WTIE148 Instrukcja

15 Października 2024
Freggia

Freggia WISE126R Instrukcja

15 Października 2024
Freggia

Freggia WISE126B Instrukcja

15 Października 2024
Freggia

Freggia WISE126 Instrukcja

15 Października 2024
Freggia

Freggia WISA105 Instrukcja

15 Października 2024
Freggia

Freggia WISA106 Instrukcja

15 Października 2024
Freggia

Freggia WIA107 Instrukcja

15 Października 2024