Instrukcja obsługi Shure SLXD1

Shure mikrofon SLXD1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shure SLXD1 (43 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/43
SLX-D
Wireless System
Shure online user guide for SLX-D digital wireless system.
Version: 4.0 (2020-H)
Shure Incorporated
2/43
Table of Contents
Table of Contents
Table of Contents
Table of ContentsTable of Contents
SLX-D Wireless System 3
IMPORTANT SAFETY INSTRUCTIONS 3
WARNING 4
Important Product Information 4
LICENSING INFORMATION 4
Australia Warning for Wireless 4
Overview 5
Features 5
System Components 6
Set Up the Receiver 8
Wearing the Bodypack Transmitter 9
Hardware Interface 10
Receiver Front and Back Panels 10
Navigating the Receiver Menus 11
Transmitters 13
Transmitter Menu Options and Navigation 15
Locking and Unlocking the Receiver Controls 15
Batteries and Chargers 16
Install Transmitter Batteries 16
Setting the AA Battery Type 17
Shure SB903 Rechargeable Battery 17
Average Charging Times 19
Sound Check and Gain Adjustment 19
System Set Up 20
Creating Audio Channels 20
What are Groups and Channels? 20
Using the Guided Frequency Setup 21
Manual Frequency Selection 22
Linking Two Transmitters to a Receiver 23
Adding SLX-D to Other Shure Wireless Systems 23
Radio Frequency (RF) Settings 23
Setting the Transmitter RF Power 23
Networking 24
Connecting to a Network 24
Automatic IP Addressing 24
Configuration Tips 24
Network Troubleshooting 24
Connecting to an External Control System 24
Firmware Updates 24
Firmware Release Requirements 25
Mount the SLX-D Receiver in a Rack 25
Installing Footpads 26
Accessories 27
Optional Accessories 27
Specifications 31
Receiver Output Connectors 38
Transmitter Input 38
Frequency Range and Transmitter Output Power 38
Frequencies for European Countries 39
Certifications 41
Information to the user 41
Shure Incorporated
3/43
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
SLX-D
Wireless System
IMPORTANT SAFETY INSTRUCTIONS
READ these instructions.
KEEP these instructions.
HEED all warnings.
FOLLOW all instructions.
DO NOT use this apparatus near water.
CLEAN ONLY with dry cloth.
DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance
withthemanufacturersinstructions.
DONOTinstallnearanyheatsourcessuchasopenflames,radiators,heatregisters,stoves,orotherapparatus(in
cluding amplifiers) that produce heat. Do not place any open flame sources on the product.
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third
prongareprovidedforyoursafety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultanelectricianforreplace
ment of the obsolete outlet.
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
ONLY USE attachments/accessories specified by the manufacturer.
USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the
apparatus.
The MAINS plug or an appliance coupler shall remain readily operable.
The airborne noise of the Apparatus does not exceed 70dB (A).
ApparatuswithCLASSIconstructionshallbeconnectedtoaMAINSsocketoutletwithaprotectiveearthingconnec
tion.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
Operate this product within its specified operating temperature range.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.


Specyfikacje produktu

Marka: Shure
Kategoria: mikrofon
Model: SLXD1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shure SLXD1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikrofon Shure

Shure

Shure MXA901-R Instrukcja

8 Października 2024
Shure

Shure SBC-DC-903 Instrukcja

5 Października 2024
Shure

Shure SM7dB Instrukcja

29 Września 2024
Shure

Shure MX412SE/C Instrukcja

21 Września 2024
Shure

Shure SBC10-904 Instrukcja

21 Września 2024
Shure

Shure PG27 Instrukcja

20 Września 2024
Shure

Shure TH53 Instrukcja

20 Września 2024
Shure

Shure KSM8 Instrukcja

20 Września 2024
Shure

Shure UA834 Instrukcja

17 Września 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Audio-Technica

Audio-Technica BP4073 Instrukcja

15 Października 2024
Power Dynamics

Power Dynamics PD524 Instrukcja

15 Października 2024
Audio-Technica

Audio-Technica AT4060 Instrukcja

14 Października 2024
Pyle

Pyle PDWM8225 Instrukcja

13 Października 2024
AKG

AKG WMS420 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica BP892xCH Instrukcja

12 Października 2024
Apart

Apart MDS.DEL Instrukcja

10 Października 2024
BOYA

BOYA BY-V4 Instrukcja

9 Października 2024