Instrukcja obsługi Shure BM6620

Shure mikrofon BM6620

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shure BM6620 (12 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
1/12
BM6620 -- Boundary Microphones
BM 6620 Boundary Microphone
Important Safeguards
1. - All the safety and operating instructions should be read before the apparatus or Read these instructions
system is operated.
2. - The important safety instructions and operating instructions should be retained for Keep these instructions
future reference.
3. - All warnings on the apparatus and in the operating instructions should be adhered to.Follow all warnings
4. - All instructions for installation or use/operating should be followed.Follow all instructions
5. - Do not use this apparatus in a water or moistures environment - for Do not use this apparatus near water
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in
an unprotected outdoor installation, or any area which is classified as a wet location.
6. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture
and no objects filled with liquids, such as vases, should be placed on this apparatus.
7. - Unplug the apparatus from the outlet before cleaning. Do not use liquid cleaners Clean only with dry cloth
or aerosol cleaners.
8. Do not block any ventilation openings. Install in accordance with the manufacturers instructions -
Openings in the enclosure, if any, are provided for ventilation and to ensure reliable operation of the apparatus
and to protect it from overheating. These openings must not be blocked or covered. This apparatus should not
be placed in a built-in installation unless proper ventilation is provided or the manufacturer’s instructions have
been adhered to.
9. Do not install near any heat sources such as radiators, heat registers, stoves, air ducts, or other appa
ratus (including amplifiers) that produce heat.
Shure Incorporated
2/12
10. Do not install the unit in a place exposed to direct sunlight, excessive dust or humidity, mechanical vi
bration or shock .
11. To avoid moisture condensations do not install the unit where the temperature may rise rapidly.
12. A polarized plug has two blades Do not defeat the safety purpose of the polarized or ground-type plug.
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
13. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
14. . Any mounting of the apparatus should Only use attachments/accessories specified by the manufacturer
follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufactur-
er.
15. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the ap
paratus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over - Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
16. Unplug this apparatus during lighting storms or when unused for long periods of time . – Not applicable
when special functions are to be maintained, such as evacuation systems.
17. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
18. Replacement Parts - When replacement parts are required, be sure the service technician has used replace-
ment parts specified by the manufacturer or having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
19. Safety Check - Upon completion of any service or repairs to this apparatus, ask the service technician to per-
form safety checks to determine that the apparatus is in proper operating condition.
20. - Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.Overloading
21. - This apparatus should be operated only from the type of power source indicated on the Power Sources
marking label. If you are not sure of the type of power supply you plan to use, consult your appliance dealer or
local power company. For apparatuses intended to operate from battery power, or other sources, refer to the
operating instructions.
22. - An outdoor system should not be located in the vicinity of overhead power lines or other electric Power Lines
light or power circuits, or where it can fall into such power lines or circuits. When installing an outdoor system,
extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be
fatal.
23. - Never push objects of any kind into this apparatus through openings as they may Object and Liquid Entry
touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the apparatus. Should any liquid or solid object fall into the cabinet, unplug the
unit and have it checked by qualified personnel before operating it further.
Shure Incorporated
3/12
Labels
“Lightning Flash Symbol” with the lightning flash with arrowhead symbol within an equilateral
triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" with-
in the product enclosure that may be of sufficient magnitude to constitute a risk of shock to
persons.
“Exclamation Point Symbol” with the exclamation point within an equilateral triangle is intend-
ed to alert the user to the presence of important operating and maintenance (servicing) in-
structions in the literature accompanying the product.
Note for Power Connections
Check that the voltage of your local power supply is within the operating voltage of the unit. If a voltage conversion
is required, consult your DIS dealer or qualified personnel.
Set the Power switch to ‘Off if it is not used for several days.
Important: The equipment must be connected to earth (ground)
The wires in the main lead supplied with the equipment are colored in accordance with the following codes:
Green-and-yellow Earth (Ground)
Blue Neutral
Brown Live
The green-and-yellow wire must be connected to the terminal in the plug marked with the letter E or with the
safety earth symbol or marked with green-and-yellow color.
The blue wire must be connected to the terminal marked with the letter N or marked with black color.
The brown wire must be connected to the terminal marked with the letter L or marked with red color.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Power Disconnect
Apparatuses with or without On/Off switches have power supplied to the apparatus whenever the power cord is in-
serted into the power source; however, the apparatus is operational only when the On/Off switch is in the On posi-
tion. The power cord is the main power disconnect for all apparatuses.
Compliance
The equipment is intended to be used in professional audio applications.
Note: This device is not intended to be connected directly to a public internet network.
EMC conformance to Environment E2: Commercial and Light Industrial. Testing is based on the use of supplied
and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC perfor-
mance.


Specyfikacje produktu

Marka: Shure
Kategoria: mikrofon
Model: BM6620

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shure BM6620, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikrofon Shure

Shure

Shure MXA901-R Instrukcja

8 Października 2024
Shure

Shure SBC-DC-903 Instrukcja

5 Października 2024
Shure

Shure SM7dB Instrukcja

29 Września 2024
Shure

Shure MX412SE/C Instrukcja

21 Września 2024
Shure

Shure SBC10-904 Instrukcja

21 Września 2024
Shure

Shure PG27 Instrukcja

20 Września 2024
Shure

Shure TH53 Instrukcja

20 Września 2024
Shure

Shure KSM8 Instrukcja

20 Września 2024
Shure

Shure UA834 Instrukcja

17 Września 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Audio-Technica

Audio-Technica BP4073 Instrukcja

15 Października 2024
Power Dynamics

Power Dynamics PD524 Instrukcja

15 Października 2024
Audio-Technica

Audio-Technica AT4060 Instrukcja

14 Października 2024
Pyle

Pyle PDWM8225 Instrukcja

13 Października 2024
AKG

AKG WMS420 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica BP892xCH Instrukcja

12 Października 2024
Apart

Apart MDS.DEL Instrukcja

10 Października 2024
BOYA

BOYA BY-V4 Instrukcja

9 Października 2024