Instrukcja obsługi Shure AD610

Shure mikrofon AD610

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shure AD610 (13 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/13

1/13

AD610 -- ShowLink® Access Point

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accor

dance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other appara

tus (including amplifiers) that produce heat. Do not place any open flame sources on the product.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider

blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been dam

aged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vas

es, on the apparatus.

16. The MAINS plug or an appliance coupler shall remain readily operable.

17. The airborne noise of the Apparatus does not exceed 70dB (A).

18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing

connection.

19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

Shure Incorporated

2/13

21. Operate this product within its specified operating temperature range.

Explanation of Symbols

Caution: risk of electric shock

Caution: risk of danger (See note.)

Direct current

Alternating current

On (Supply)

Equipment protected throughout by DOUBLE INSULATION or REINFORCED INSULATION

Stand-by

Equipment should not be disposed of in the normal waste stream

WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing

to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from

the factory setting.

WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or

other reproductive harm.

AD610 ShowLink Access Point

The AD610 ShowLink access point enables real-time remote control of all ShowLink-enabled Axient™ transmit

ters, including both digital and analog models. The access point allows comprehensive management of transmitter

parameters from the receiver or Wireless Workbench 6 using 2.4 GHz wireless network communication. All para

meter changes occur without interruption to the performer.

Multiple access points can extend the operational range or increase the number of transmitters supported on the

ShowLink network. The access point also features true diversity antenna inputs.

Features

•Real-time wireless remote control of up to 24 transmitters per ShowLink access point

•New RF design and true diversity antenna scheme for improved link performance

• Easy transmitter authentication—Recognizes linked transmitters upon IR sync

• Provides coverage area approximately the same as the transmitter’s range

•Automatic hand-offs between multiple access points extend operating range

Shure Incorporated

3/13

• Automated channel selection—Independently scans 2.4 GHz frequency range and determines best channel for

use

• Automatic frequency agility—Moves a ShowLink network to the best available 2.4 GHz channel in the event of

signal degradation

•Wireless Workbench 6 software supports networked control of all device functions and provides a ShowLink

plot for viewing 2.4 GHz signal levels

•Receives power via Power over Ethernet (PoE) network connection or from an external power supply

• Versatile mounting options—Fits microphone stand adapters and has builtin ¼"20 and M6 x 1.0 threading for

installation

•Backwards compatible with Axient analog transmitters and receiver

ShowLink Access Point Overview

①

①① ShowLink 2.4 GHz detachable antennas

For 2.4 GHz signals

②

②② ShowLink Data Status LED (blue)

•ON Steady: Linked, no data transmission

•Flashing: Transmitting data. Rate of flashing indicates level of activity

Specyfikacje produktu

Marka:	Shure
Kategoria:	mikrofon
Model:	AD610
Materiał obudowy:	Metal
Wysokość produktu:	190 mm
Szerokość produktu:	102 mm
Głębokość produktu:	47 mm
Waga produktu:	464 g
Certyfikaty:	WEEE, RoHS
Zakres częstotliwości:	2.4 - 2.4835 MHz
Kolor obudowy:	Czarny