Instrukcja obsługi Shure 545SD

Shure mikrofon 545SD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shure 545SD (5 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
1/5
545SD -- Vocal Microphone
General Description
The Model 545SD is a dual-impedance, unidirec-
tional, dynamic microphone. Shipped connected
for low-impedance operation, it features a silent
magnetic reed on/off switch.
The Classic Unidyne is a favorite for instrument
pickup and recording,and can be used on
lecterns for public address systems such as
those used in political conventions and legisla-
tures, convention halls, hotels, public auditori-
ums, stadiums, schools, and churches.
Features
•Exceptionally uniform cardioid pattern minimizes feedback in PA applications
•Selectable dual-impedance operation
•Silent magnetic reed on/off switch with lock option
•Cardioid dynamic
•Frequency response: 50 to 15,000 Hz
Connections
When using the microphone with a balanced input, pins 2 and 3 are the audio signal carriers. When using the mi
crophone with an unbalanced input, use a cable wired with pin 2 as the signal carrier and pin 3 connected to the
cable shield (ground), such as the Shure C20AHZ high-impedance cable.
Shure Incorporated
2/5
Impedance Selection
The microphone is shipped connected for low impedance operation. To change to high impedance, proceed as fol
lows:
1. Remove plug element at receptacle end of microphone by turning slotted setscrew in (counterclockwise) and
carefully withdrawing plug element from case.
2. Disconnect 2-terminal impedance selection socket from rear of plug element.
3. Reconnect 2-terminal impedance selection socket in reverse position so that pin 3 of plug element is inserted
in socket terminal "H" (White).
4. Reassemble plug element into microphone and seal setscrew securely by turning out (clockwise).
IMPEDANCE SELECTION RECEPTACLE END OF MICROPHONE
Polarity
All cables and microphones should be tested to ensure that they have the same polarity. To test two microphones
and/or their cables for proper polarity, connect them to an amplifier and talk or sing into them while holding them
three or four inches apart. The sound from the speakers should be the same when talking into either microphone
or directly between them. If the sound drops drastically, or if a dead spot is found when talking between the two mi
crophones, either the microphones or their cables have opposite polarity.
To change the polarity of a microphone cable, either use a Shure A15PRS phase reverser or interchange the wires
connected to pins 2 and 3 of the threepin connector at one end of the cable. To change the polarity of a micro
phone, the microphone cartridge leads must be interchanged. This should be performed by your dealer, the Shure
Factory Service Department, or other qualified service personnel.
Specifications
Type
Dynamic (moving coil)
Frequency Response
50 to 15,000 Hz
Shure Incorporated
3/5
Impedance
Dual. Microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at
19 to 300 ohms and 'High' for connection to highimpedance microphone inputs. Wired for low impedance as sup
plied. To change impedance, see sections on Impedance Selection and Connections.
Output Level
Open Circuit Voltage , at 1kHz
L -58.0 (1.3 dB mV
H -35.0 (17.6 dB mV
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Switch
Built-in magnetic reed on/off switch with lockplate. To lock switch in the ON position, remove screw on lockplate
and turn lockplate 180°. Reassemble and tighten screw.
Cartridge Shock Mount
Internal rubber vibration isolator
Swivel Adapter
Positive action, adjustable through 90° from vertical to horizontal, permits easy removal for handheld use, suitable
for mounting on stand with 5/8 in.-27 thread
Housing
Chrome-plated die casting with ARMO-DUR grille and stainless steel screen
Net Weight
less cable
255 (9oz.) g
[1]

Specyfikacje produktu

Marka: Shure
Kategoria: mikrofon
Model: 545SD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shure 545SD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Shure

Shure

Shure MXA901-R Instrukcja

8 Października 2024
Shure

Shure SBC-DC-903 Instrukcja

5 Października 2024
Shure

Shure SM7dB Instrukcja

29 Września 2024
Shure

Shure MX412SE/C Instrukcja

21 Września 2024
Shure

Shure SBC10-904 Instrukcja

21 Września 2024
Shure

Shure PG27 Instrukcja

20 Września 2024
Shure

Shure TH53 Instrukcja

20 Września 2024
Shure

Shure KSM8 Instrukcja

20 Września 2024
Shure

Shure UA834 Instrukcja

17 Września 2024
Shure

Shure Microflex Overhead MX202 Instrukcja

17 Września 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Audio-Technica

Audio-Technica BP4073 Instrukcja

15 Października 2024
Power Dynamics

Power Dynamics PD524 Instrukcja

15 Października 2024
Audio-Technica

Audio-Technica AT4060 Instrukcja

14 Października 2024
Pyle

Pyle PDWM8225 Instrukcja

13 Października 2024
Sennheiser

Sennheiser ew 100 G4-845-S Instrukcja

13 Października 2024
AKG

AKG WMS420 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica BP892xCH Instrukcja

12 Października 2024
Apart

Apart MDS.DEL Instrukcja

10 Października 2024
Behringer

Behringer Go Cam Wireless Instrukcja

9 Października 2024
BOYA

BOYA BY-V4 Instrukcja

9 Października 2024