Instrukcja obsługi Shimano BR-C6000-F

Shimano Niesklasyfikowane BR-C6000-F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shimano BR-C6000-F (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
INTER M Brake
IMPORTANT NOTICE
•Contact the place of purchase or a distributor for information on installation,
adjustment, and replacement of the products which are not found in the user's
manual. A dealer's manual for professional and experienced bicycle mechanics is
available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly
before use, follow it for correct use, and store it so that it
can be referenced at any time.
The following instructions must be observed at all times in order to prevent
personal injury and physical damage to equipment and surroundings. The
instructions are classified according to the degree of danger or damage which may
occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result in
death or serious injury.
WARNING Failure to follow the instructions could result in
death or serious injury.
CAUTION
Failure to follow the instructions could cause
personal injury or physical damage to equipment
and surroundings.
Important safety information
WARNING
•Because each bicycle may handle slightly differently depending on the model, be
sure to learn the proper braking technique (including brake lever pressure and
bicycle control characteristics) and operation of your bicycle. Improper use of your
bicycle's brake system may result in a loss of control or a fall, which could lead to
severe injury.
•Do not disassemble or modify the product. This may cause the product to not
operate correctly, and you may suddenly fall and be seriously injured.
•It is necessary to use the brake caliper of the SHIMANO front INTER M brake and
the hub as a set (excluding BR-C6050-F/BR-C6060-F). The hub of the SHIMANO
front INTER M brake has a built-in power modulator. This system controls the
braking force so that excessive force is not applied if the braking force reaches
the specified value. If the front brake is applied too strongly in the case that the
hub is not equipped with a power modulator or the hub is equipped with a
power modulator but the overall mass does not meet the recommended mass,
the front wheel may lock and the bicycle may fall forward, and serious injury may
result. Noise is generated by the operation of the power modulator when the
brake is applied, but this is not a sign of a malfunction.
•The range of overall allowable mass (bicycle + rider + luggage) of the BR-C6050-F/
BR-C6060-F power modulator
Model name Outer diameter of tire
(mm)
Range of overall allowable
mass (kg)
BR-C6050-F 660 - 712 70 - 100
BR-C6060-F 660 - 712 100 - 130
•Use the BR-C6050-F or BR-C6060-F power modulator within its range of overall
allowable mass. If the overall mass is out of the allowed range, the controlled
braking force may be too strong or too weak.
•A wet road surface may cause tires to lose traction; therefore, to avoid this,
reduce your speed and apply the brakes early and gently. If the tires lose traction,
you may fall and be seriously injured.
CAUTION
•Do not continuously apply the brakes when riding down long slopes. For the
SHIMANO INTER M brake system, this will cause the internal brake parts to
become very hot, weakening braking performance, as well as causing a reduction
in the amount of brake grease inside the brake, which can lead to noise being
generated or problems such as abnormally sudden braking.
•If any of the following occur while using the brakes, stop riding immediately and
ask the place of purchase to carry out inspection and repairs.
1. An abnormal noise is heard when the brakes are applied.
2. The braking performance is abnormally strong.
3. The braking performance is abnormally weak.
If 1 and 2 occur, the cause might be a lack of brake grease, so ask the place of
purchase to grease the mechanism with special roller brake grease.
If 2 and 3 occur when using BR-C6050-F/BR-C6060-F, the power modulator may be
malfunctioning. Have it inspected/repaired at the place of purchase.
•Do not touch the area around the brake for at least 30 minutes after riding the
bicycle. If the brake is used frequently, the area around the brake may become
hot.
Area around the brake
•Check the brake cable for rust. If the brake cable becomes rusty, braking
performance will suffer. If this happens, replace the brake cable with a genuine
SHIMANO brake cable and re-check braking performance.
•The front brake unit and front hub unit should never be disassembled. If it is
disassembled, it may no longer work properly.
Notice
•If you apply the front INTER M brake strongly while the bicycle is stopped then
shake the wheel, you will notice that there is a small amount of gap in the brakes.
This is normal, and will not cause any problems at all while riding.
•Products are not guaranteed against natural wear and deterioration from normal
use and aging.
•For maximum performance we highly recommend SHIMANO lubricants and
maintenance products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found,
consult your place of purchase or a distributor.
•Do the front and rear brakes work correctly?
•Are there any abnormal noises?
•Is the braking performance abnormally strong?
•Is the braking performance abnormally weak?
•Does the brake cable have any rust?
Names of parts
Front Rear
Brake cable Brake cable
UM-8M30A-006 User's Manual
Please note: specifications are subject to change for improvement without notice. (English)
© Feb. 2021 by SHIMANO INC. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Specyfikacje produktu

Marka: Shimano
Kategoria: Niesklasyfikowane
Model: BR-C6000-F

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shimano BR-C6000-F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Shimano

Shimano

Shimano CLARIS 2400 ST-R240-R Instrukcja

9 Października 2024
Shimano

Shimano SL-RV300-7R Instrukcja

9 Października 2024
Shimano

Shimano SL-RV400-LN Instrukcja

9 Października 2024
Shimano

Shimano SL-RV400-7R Instrukcja

9 Października 2024
Shimano

Shimano SW-E8000-L Instrukcja

9 Października 2024
Shimano

Shimano CLARIS R2000 ST-RS200-R Instrukcja

9 Października 2024
Shimano

Shimano CLARIS 2400 ST-R240-L Instrukcja

9 Października 2024
Shimano

Shimano SL-RV300-LN Instrukcja

9 Października 2024
Shimano

Shimano SL-RV300-L Instrukcja

9 Października 2024
Shimano

Shimano SL-RV400-L Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024