Instrukcja obsługi Sharp XG-MB55X

Sharp Projektory XG-MB55X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp XG-MB55X (68 stron) w kategorii Projektory. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/68
MULTIMEDIA PROJECTOR
MODEL
XG-MB55X
XR-20X/XR-20S
XR-10X/XR-10S
OPERATION MANUAL
Introduction Quick Start Setup Connections Basic
Operation
Useful
Features Appendix
ii
IMPORTANT
For your assistance in reporting the loss
or theft of your Projector, please record
the Model and Serial Number located on
the bottom of the projector and retain this
information.
Before recycling the packaging, please
ensure that you have checked the con-
tents of the carton thoroughly against the
list of “Supplied accessories” on page 10.
Model No.:
Serial No.:
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporat-
ing a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362
fuse marked or and of the same rating as above, which is also indicated on the pin
face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse
cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied, cut off the mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi-
ately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket
outlet, as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the
plug which is marked by the letter E or by the safety earth symbol or coloured green or
green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
iii


Specyfikacje produktu

Marka: Sharp
Kategoria: Projektory
Model: XG-MB55X
Waga produktu: 3900 g
Technologia łączności: Bezprzewodowy
Poziom hałasu: 33 dB
Współczynnik kontrastu (typowy): 2000:1
Pobór mocy: 350 W
Typ lamp: SHP
Standardowe rozwiązania komunikacyjne: Infrared, RS232C
Wymiary produktu (SxGxW): 315 x 294 x 120 mm
Zasilanie: 100-240V AC(50/60Hz)
Pozycjonowanie na rynku: Prezentacja
Wejście audio: PC/Component Stereo Audio-3.5m stereo mini Connector, "Video" Stereo Audio-1-pair RCA pin-typ
Kompatybilność: PC, Mac, Workstation
Cyfrowe zbliżenie: 1.15 x
Zasięg skanowania w poziomie: 15 - 70 kHz
Zasięg skanowania (długość): 45 - 85 Hz
Inne połączenia: Computer/RGB(or Component)-15 Pin HD(x2)RS-232C-9 pin mini DIN
Pełny HD: Tak
Format obrazu: 4:3, 16:9
Wyjście audio: RGB Monitor Loop-Through - 15 Pin HD, VAO line-out - 3.5mm
System soczewki: Short Throw Manual Zoom & Focus
Jasność projektora: 2500 ANSI lumenów
Technologia projekcji: LCD
Naturalna rozdzielczość projektora: XGA (1024x768)
Rodzaj źródła światła: Lampa
Moc lampy: 275 W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sharp XG-MB55X, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą