Instrukcja obsługi Sharp SD-PX2

Sharp Zestaw kina domowego SD-PX2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp SD-PX2 (67 stron) w kategorii Zestaw kina domowego. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/67
SD-PX2
1-BIT DIGITAL RECEIVER WITH DVD
AMPLITUNER NUMÉRIQUE 1-BIT AVEC DVD
MODEL
MODÈLE
OPERATION MANUAL
MODE D’EMPLOI
ENGLISH
Please refer to
pages i to iv and
E-1 to E-62.
FRANÇAIS
Se reporter aux
pages i et iv
F-1 à F-62.
Thank you for purchasing this SHARP product. To obtain the best
performance from this product, please read this manual carefully. It will guide
you in operating your SHARP product.
Nous vous remercions d'avoir porté votre choix sur ce produit SHARP. Pour
en tirer le meilleur parti, veuillez lire ce mode d'emploi très attentivement.
i
SPECIAL NOTES (for Users in the U.S.A.)
NOTE
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not oc-
cur in a particular installation. If this equipment does cause harmful interference to ra-
dio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the fol-
lowing measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications to this equip-
ment not expressly approved by the manufacturer could void the user's authority to
operate this equipment.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-
40 of the National Electrical Code that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the grounding sys-
tem of the building, as close to the point of cable entry as practical.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient mag-
nitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
0010
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft, please record
below the model number and serial number which are located on the rear of the
unit.
Please retain this information.
Model number .................................................................................
Serial number .................................................................................
Date of purchase .................................................................................
Place of purchase .................................................................................
0010
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
0010
CAUTION:
THIS PRODUCT IS A CLASS 1 LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RE-
SULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS PRODUCT IS HARMFUL TO
THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
0207
ii
IMPORTANT SAFETY INSTRUCTIONS (for Users in the U.S.A.)
1
Read Instructions - All the safety and operating instructions should
be read before the product is operated.
2
Retain Instructions - The safety and operating instructions should be
retained for future reference.
3
Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4
Follow Instructions - All operating and use instructions should be
followed.
5
Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6
Attachments - Do not use attachments not recommended by the prod-
uct manufacturer as they may cause hazards.
7
Water and Moisture - Do not use this product near water - for ex-
ample, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8
Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufac-
turer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting ac-
cessory recommended by the manufacturer.
9
A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to over-
turn.
10
Ventilation - Slots and openings in the cabinet are provided for venti-
lation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or cov-
ered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.
11
Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
12
Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternate Warnings - This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
13
Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
14
Protective Attachment Plug - The product is equipped with an at-
tachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
0109

Specyfikacje produktu

Marka: Sharp
Kategoria: Zestaw kina domowego
Model: SD-PX2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sharp SD-PX2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zestaw kina domowego Sharp

Sharp

Sharp HT-X1 Instrukcja

11 Września 2024
Sharp

Sharp XL-BD601PH Instrukcja

25 Sierpnia 2024
Sharp

Sharp HT-DV30H Instrukcja

23 Sierpnia 2024
Sharp

Sharp SD-HX500 Instrukcja

16 Sierpnia 2024
Sharp

Sharp SD-PX2 Instrukcja

5 Lipca 2024

Instrukcje Zestaw kina domowego

Najnowsze instrukcje dla Zestaw kina domowego

Sony

Sony SA-PSD5 Instrukcja

14 Października 2024
Onkyo

Onkyo HT-S9800 Instrukcja

13 Października 2024
LG

LG MAI0702 Instrukcja

9 Października 2024
LG

LG LH-TK3605Q Instrukcja

9 Października 2024
LG

LG XH-TK5022Q Instrukcja

8 Października 2024
LG

LG MAI0522 Instrukcja

8 Października 2024
LG

LG MAI0552 Instrukcja

8 Października 2024
LG

LG LH-T2665 Instrukcja

8 Października 2024
Samsung

Samsung HT-KD800 Instrukcja

8 Października 2024
Samsung

Samsung HT-DS1870 Instrukcja

8 Października 2024