Instrukcja obsługi Sharp PN-ZL01A

Sharp Niesklasyfikowane PN-ZL01A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp PN-ZL01A (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

• Thank you for purchasing a SHARP product.

Before using the product, please be sure to read this operation manual carefully. Before using the product, be sure to read and understand the

“SAFETY PRECAUTIONS” in the operation manual of the LCD MONITOR. After reading the manual, keep it in a convenient location where it

can be accessed at any time.

As for how to use the product, refer to the manual of the LCD MONITOR.

TIPS

- This product was shipped after strict quality control and inspection; however, if breakage or a malfunction should be found, contact your

SHARP dealer or your nearest customer contact.

- Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for

any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.

- This product and its accessories may be upgraded without advance notice.

Operation Manual

TOUCH PEN

Applicable models

(as of August 2017)

LCD MONITOR

PN-60TB3/PN-60TW3A/PN-70TB3/PN-70TW3A/

PN-L603B/PN-L603WA/PN-L703B/PN-L703WA

(Available models differ according to region.)

CAN ICES-3 (A) / NMB-3 (A)

IMPORTANT:

To aid reporting in case of loss or theft, please record the

product’s model and serial numbers in the space provided.

The numbers are located in the rear of the product.

Model No.:

Serial No.:

U.S.A. ONLY

WARNING:

FCC Regulations state that any unauthorized changes or modi cations to this equipment not expressly approved by the

manufacturer could void the user’s authority to operate this equipment.

NOTE:

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required

to correct the interference at his own expense.

FCC CAUTION

Changes or modi cations not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

U.S.A. ONLY

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject

to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of this device.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC

radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has

very low levels of RF energy that are deemed to comply without testing of speci c absorption ratio (SAR).

U.S.A. AND

CANADA ONLY

PN-ZL01A

PN-ZL02A

CINSE1459MP51(1)

Supplied Components

Specications

Model PN-ZL01A/PN-ZL02A

Wireless communication method 2.4 GHz, Bluetooth Low Energy, FHSS method

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement

without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

Printed in China

17J CN1

If any component should be missing, please contact your dealer.

□ Pen tip: 2 □ Touch pen (PN-ZL02A): 1

□ Touch pen battery (LR-03 (“AAA” size)): 1

□ Operation manual (this manual): 1

PN-ZL01A only

PN-ZL02A only

□ ID labels: 4 x 2

□ Touch pen adapter (PN-ZL05): 1

□ Touch pen adapter screw

(step screw M3): 1

* For environmental protection!

Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

* Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your

clothing. In order to avoid these problems, make sure to observe the precautions below:

• Use the specied batteries only.

• Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment.

WARNING:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may

be required to take adequate measures.

Specyfikacje produktu

Marka:	Sharp
Kategoria:	Niesklasyfikowane
Model:	PN-ZL01A
Kolor produktu:	Black, Stainless steel
Bluetooth:	Tak
Certyfikaty:	CE
Standardy komunikacyjne:	IEEE 802.15.4
Rodzaj baterii:	AAA
Kompatybilność:	PN-60TB3, PN-60TW3A, PN-70TB3, PN-70TW3A, PN-L603B, PN-L603WA, PN-L703B, PN-L703WA
Kompatybilność marki:	Sharp
Kształt:	Cylidner