Instrukcja obsługi Sharp LC-42SB45UT

Sharp Telewizja LC-42SB45UT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp LC-42SB45UT (27 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/27

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

This “bolt of lightning” indicates

uninsulated material within your unit

may cause an electrical shock. For

the safety of everyone in your

household, please do not remove

product covering.

The “exclamation point” calls

attention to features for which you

should read the enclosed literature

closely to prevent operating and

maintenance problems.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE RTS INSIDE.PA

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

CAUTION:

LC-42SB45U

OPERATION MANUAL

• Theillustrationsandon-screendisplaysinthisoperationmanualarefor

explanationpurposesandmayvaryslightlyfromtheactualoperations.

• Menuitemsthatarenotselectablearegrayedout.

• Toavoidscratchingtheframeorscreen,pleaseuseasoft,lintfreecloth

forcleaning.ApprovedcleaningclothsareavailabledirectlyfromSharpin

single(00Z-LCD-CLOTH)ortriple(00Z-LCD-CLOTH-3)packs.Call1-800

BESHARPforordering,orVISITwww.sharpusa.com/SharpDirect.

IMPORTANT:

Toaidreportingincaseoflossortheft,pleaserecordthe

TV'smodelandserialnumbersinthespaceprovided.The

numbersarelocatedattherearoftheTV.

ModelNo.:

SerialNo.:

LIQUID CRYSTAL TELEVISION

ENGLISH

IMPORTANT INFORMATION

ENGLISH

WARNING: FCC Regulations state that any unauthorized changes or modications to this equipment not expressly approved

by the manufacturer could void the user's authority to operate this equipment.

“Note to C V system installer: This reminder is provided to call the CAT ATV system installer's attention to Article 820-40 of the

National Elec or proper grounding and, in partrical Code that provides guidelines f ticular, species that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and uorescent lamp containing a small amount of

mercury. Disposal of these materials may be regulated due to environmental considerations.

For disposal or recycling information, please contact your local authorities, the Electronic

Industries Alliance: www.eiae.org, the lamp recycling organization: www.lamprecycle.org or

Sharp at 1-800-BE-SHARP

(For U.S.A. only)

CAUTION:

This product satises FCC regulations when shielded cables and connectors are used onne the unit o other equipment.to c ct t To

prevent electromagnetic erence with electric appliances such as and elevision use shielded cables and onne ors interf radios t s, c ct

for connections.

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC

Rules. These limits are designed to provide reasonable protection against harmful inte erence in a residential installation. This rf

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful inte erence to radio or television reception, which can be rf

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any inter rence received, including fe

interference that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

TEL: 1-800-BE-SHARP

For Business Customers: URL http://www.sharpusa.com

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKE OR THE T, TABLE.

PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUC USE T.

ONLY WITH A CART, STAND, TRIPOD, BR KE OR TABLE RECOMMENDED AC T, BY THE MANUFACTURER OR

SOLD WITH THE PRODUC FOLLOW THE CTURER'S INSTRUCTIONS WHEN INSTALLING THE T. MANUFA

PRODUCT AND USE MOUNTING CESSORIES RECOMMENDED THE AC BY MANUFACTURER. A PRODUCT

AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN

SURFACES MAY CAUSE THE PRODUC OMBINATION T AND CART C TO OVERTURN.

• ManufacturedunderlicensefromDolbyLaboratories.“Dolby”andthedouble-DsymbolaretrademarksofDolby

Laboratories.

• “HDMI,theHDMIlogoandHigh-DenitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI

LicensingLLC.”

IMPORTANT INFORMATION

SHARPLIQUIDCRYSTALTELEVISION,MODELLC-42SB45U

TRADEMARKS

• ProductsthathaveearnedtheENERGYSTAR

®aredesignedtoprotecttheenvironmentthroughsuperiorenergy

efciency.

Electricity is used to pe orm many useful functions, but it can also cause personal injuries and prope y damage ifrf rt

improperly handled. This produc red and manufact has been enginee tured with the highest priority on safety. However,

improper use can result in electric shock and/or r . In order to prevent potential danger, please obsere ve the following

instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of

your Liquid Crystal Television, please read the following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat register or other apparatus (including s, s, stove

ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding pron he wide blade or g. T

the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician

for replacement of the obsolete outlet.

10) otect the power cord from being walked on or pinched particularly at plugs enience receptacles, and the Pr , conv

point where they exit from the apparatus.

11) Only use attachments/accessories specied by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) er all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in Ref

any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15) wer Sources—This product should be operated only from the type of power source indicated on the marPo king

label. If you are not sure of the type of power supply to your home, consult your product dealer or local power

company. For products intended to operate from battery power, or other source er to the operating s, ref

instructions.

16) erloading—Do not overload wall outlets, e ension cordsOv xt , or integral convenience receptacles as this can result

in a risk of re or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or shor out parts that could result in a re or electric shock. Never spill liquid of a kind t- ny

on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualied service

personnel under the following conditions:

a) When the AC cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work by a qualied technician to restore the

product to its normal operation,

e) If the product has been dropped or damaged in any way, and

f) When the product exhibits a distinct change in per rmance - this indicates a need for servicfo e.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement

parts specied by the manufacturer or have the same characteristics as the original part. Unauthorized

substitutions may result in re, electric shock, or other hazards.

20) ty Check—Upon completion of any service or repairs to this product, ask the ser orm Safe vice technician to perf

safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

22) The apparatus must be connected to a mains socket outlet with a protected earthed connection.

23) The appliance coupler is used as the disconnect device of this apparatus, the disconne device shall remain ct

readily operable.

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years

of trouble-free operation of your product, please read the Important Safety Instructions carefully before

using this product.

IMPORTANT SAFETY INSTRUCTIONS

Specyfikacje produktu

Marka:	Sharp
Kategoria:	Telewizja
Model:	LC-42SB45UT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sharp LC-42SB45UT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Telewizja Sharp

Sharp 40BJ5E Instrukcja

13 Stycznia 2025

Sharp LC-32LX705 Instrukcja

11 Stycznia 2025

Sharp 70GK4445E Instrukcja

2 Stycznia 2025

Sharp 70GL4260E Instrukcja

2 Stycznia 2025

Sharp 55GL4060E Instrukcja

2 Stycznia 2025

Sharp 65GR8465E Instrukcja

2 Stycznia 2025

Sharp 50GK4245K Instrukcja

2 Stycznia 2025

Sharp 65GP7465E Instrukcja

2 Stycznia 2025

Sharp 50GM6245E Instrukcja

2 Stycznia 2025

Sharp 70GK4245K Instrukcja

2 Stycznia 2025

Instrukcje Telewizja

Najnowsze instrukcje dla Telewizja

Philips 32HFL2889T Instrukcja

15 Stycznia 2025

Philips 25CE6270 Instrukcja

15 Stycznia 2025

Daewoo dtz 29u7 Instrukcja

15 Stycznia 2025

Grundig Boston ST 170 IDTV Instrukcja

15 Stycznia 2025

Daewoo dty-2880 Instrukcja

15 Stycznia 2025

Philips 50PUS6809 Instrukcja

15 Stycznia 2025

Philips 28GR5776 Instrukcja

15 Stycznia 2025

Daewoo dty 25 g6 Instrukcja

15 Stycznia 2025

Philips 21PT532 Instrukcja

15 Stycznia 2025

Philips 32pw9788 Instrukcja

15 Stycznia 2025