Instrukcja obsługi Sharp AL-1631

Sharp Printer AL-1631

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp AL-1631 (100 stron) w kategorii Printer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/100
DIGITAL LASER COPIER
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
Page
INTRODUCTION
SETTING UP THE UNIT
LOADING PAPER
MAKING COPIES
SPECIAL FUNCTIONS
MAINTENANCE
TROUBLESHOOTING
THE UNIT
4
7
14
46
52
57
61
68
INSTALLING THE
SOFTWARE
(AL-1641CS)
19
APPENDIX
AL-1631
AL-1641CS
MODEL
AL-1631/AL-1641CS
FOR YOUR PROTECTION...
To aid in reporting this unit in case of loss or theft, please record below the model number
and serial number located on the back of the unit. We also suggest you record all the
information listed and retain for future reference.
MODEL NUMBER SERIAL NUMBER
DATE OF PURCHASE
Dealer
Address City
State Zip Telephone
Service Station
Address City
State Zip Telephone
To obtain service, or to obtain product literature, accessories, or
supplies,
please call in the USA 1-(630)378-3590
or 905-568-7140 in Canada.
For customer assistance, please visit http://www.sharpusa.com/
(for USA) or (for Canada) on the World Wide Web http://www.sharp.ca/
or call (for USA).1-(630)378-3590
Do not make copies of anything which is prohibited from copying by law. The
following items are normally prohibited from copying by national law. Other
items may be prohibited by local law.
Money Stamps Bonds Stocks Bank drafts
Checks Passports Driver's licenses
1
CAUTIONS
Caution label on the unit
The label ( ) in the fusing area of the unit indicates the following:
: Caution, risk of danger
: Caution, hot surface
Cautions on using
Follow the cautions below when using this unit.
Warning:
The fusing area is hot. Exercise care in this area when removing misfed paper.
Do not look directly at the light source. Doing so may damage your eyes.
Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15
seconds before turning it back on.
Unit power must be turned off before installing any supplies.
Caution:
Place the unit on a firm, level surface.
Do not install the unit in a humid or dusty location.
When the unit is not used for a long time, for example for consecutive holidays,
turn the power switch off and remove the power cord from the outlet.
When moving the unit, be sure to turn the power switch off and remove the power
cord from the outlet.
Do not cover the unit with a dust cover, cloth or plastic film while the power is on.
Doing so may prevent heat radiation, damaging the unit.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
The socket-outlet shall be installed near the unit and shall be easily accessible.
Important points when selecting an installation site
Do not install your unit in areas that are:
damp, humid, or very dusty
exposed to direct sunlight
poorly ventilated
subject to extreme temperature or humidity changes, e.g., near an air conditioner
or heater.
Be sure to allow the required space around the
machine for servicing and proper ventilation. 8" (20cm)
4"
(10cm)
4"
(10cm)

Specyfikacje produktu

Marka: Sharp
Kategoria: Printer
Model: AL-1631

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sharp AL-1631, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Printer Sharp

Sharp

Sharp MX-M202D Instrukcja

19 Września 2024
Sharp

Sharp MX-M232D Instrukcja

5 Września 2024
Sharp

Sharp MX-4141N Instrukcja

5 Września 2024
Sharp

Sharp AL-2050 Instrukcja

3 Września 2024
Sharp

Sharp MX-M310N Instrukcja

31 Sierpnia 2024
Sharp

Sharp AL-1631 Instrukcja

31 Sierpnia 2024
Sharp

Sharp AR-M155 Instrukcja

30 Sierpnia 2024
Sharp

Sharp MX-B557P Instrukcja

29 Sierpnia 2024
Sharp

Sharp AR-M150 Instrukcja

24 Sierpnia 2024
Sharp

Sharp MX-B557F Instrukcja

24 Sierpnia 2024

Instrukcje Printer

Najnowsze instrukcje dla Printer