Instrukcja obsługi Shark EP035T2

Shark odkurzacz EP035T2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shark EP035T2 (14 stron) w kategorii odkurzacz. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/14

Model EP035/EP035T2

THREE (3) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from defects in material

and workmanship for a period of three (3) years from the date of the original purchase.

This warranty applies only to normal domestic household use.

Should your appliance fail to operate properly while in use under normal household

conditions within the three (3) year warranty period, return the complete appliance and

accessories, freight prepaid to EURO-PRO Operating LLC at the address given below.

In US: EURO-PRO Operating LLC, 94 Main Mill street, Door 16, Plattsburgh, NY 12901

In Canada:EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Quebec, H4S 1A7

If the appliance is found to be defective in material or workmanship, EURO-PRO

Operating LLC will repair or replace it free of charge. Proof of purchase date and $ 9.95

to cover the cost of return shipping and handling must be included. *

Non-durable parts including, without limitation, dust cup filters, filters, brushes and

electrical parts which normally require replacement are specifically excluded from

warranty.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or

replacement of the unit at our option. This warranty does not cover normal wear of parts

and does not apply to any unit that has been tampered with or used for commercial

purposes. This limited warranty does not cover damage caused by misuse, abuse,

negligent handling or damage due to faulty packaging or mishandling in transit. This

warranty does not cover damage or defects caused by or resulting from damages from

shipping or repairs, service or alterations to the product or any of its parts, which have

been performed by a repair person not authorized by EURO-PRO Operating LLC.

This warranty is extended to the original purchaser of the unit and excludes all other

legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC

if any, is limited to the specific obligations expressly assumed by it under the terms of

the limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or

consequential damages of any nature whatsoever. Some states do not permit the

exclusion or limitation of incidental or consequential damages, so the above may not

apply to you.

This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

*Important: Carefully pack item to avoid damage in shipping. Be sure to include

proof of purchase date and to attach tag to item before packing with your name,

complete address and phone number with a note giving purchase information,

model number and what you believe is the problem with item. We recommend you

insure the package (as damage in shipping is not covered by your warranty). Mark

the outside of your package “ATTENTION CUSTOMER SERVICE”. We are

constantly striving to improve our products, therefore the specifications

contained herein are subject to change without notice.

Turbo Hand Vac with

TAPCLEAN®HEPA Dust Cup Filter

OWNER’S MANUAL

Models EP035/EP035T2

120V., 60Hz., 6.67 Amps

For information or assistance:

USA: EURO-PRO Operating LLC Canada: EURO-PRO Operating LLC

94 Main Mill Street, Door 16 4400 Bois Franc

Plattsburgh, NY 12901 St. Laurent, QC H4S 1A7

www.sharkvac.com

Printed in China 7

TROUBLE SHOOTING GUIDE

IMPORTANT SAFETY INSTRUCTIONS

PROBLEM POSSIBLE REASON POSSIBLE SOLUTION

HAND VACUUM

WILL NOT

OPERATE

1. Power cord not firmly plugged

into outlet.

2. No power in wall outlet.

3. Needs servicing.

4. Thermostat has tripped.

1. Plug unit in firmly.

2. Check fuse or breaker.

Replace fuse/reset breaker.

3. Call 1-800-798-7398 in the

U.S or 1-514-842-8691 in

Canada.

4. Turn the unit off and unplug

from outlet. Allow to cool.

HAND VACUUM

WILL NOT PICK-UP

OR SUCTION

POWER IS WEAK

1. Dust cup is full.

2. Unit clogged.

3. HEPA Dust Cup Filter needs

cleaning or replacing.

1. Empty dust cup –

(see page 5).

2. Turn unit off and unplug

from wall outlet. Remove

HEPA Dust Cup Filter and

check for object(s) in air

duct and remove.

3. Clean or replace HEPA

Dust Cup Filter.

(see page 5)

DUST ESCAPING

FROM HAND

VACUUM

1. Dust cup is full.

2. HEPA Dust Cup Filter is not

installed correctly.

3. There is a puncture/hole in

HEPA Dust Cup Filter.

1. Empty dust cup.

2. Review HEPA Dust Cup

Filter instructions.

(see page 5)

3. Replace HEPA dust cup

filter. (see page 5)

HAND VACUUM

HOSE OR

BRUSHES WILL

NOT PICK-UP

1. Hose clogged.

2. Dust cup is full.

1. Remove hose and/or

bushes. Remove obstruction

from hose.

2. Empty and clean dust cup.

ORDERING REPLACEMENT DUST CUP FILTERS

When using your SHARK TURBO HAND VAC, basic safety precautions should

always be observed, including the following:

To reduce the risk of fire, electric shock, or

injury:

•Do not leave the SHARK plugged in

when unattended. Unplug the electrical cord

when not in use and before servicing.

•Do not allow to be used as a toy. Close

attention is necessary when used by or near

children, pets or plants.

• Use only as described in this manual. Use

only manufacturer’s recommended

accessories.

•Do not pull cord, use cord as a handle, close

a door on cord, or pull cord around sharp

edges or corners. Keep cord away from

heated surfaces.

•Use only extension cords UL-rated or cUL at

15 amperes. Extension cords rated for less

amperage may overheat. Care should be

taken to arrange the cord so that the cord

cannot be pulled or tripped over.

• Turn off all controls as applicable before

unplugging from electrical outlet.

•Do not unplug by pulling on cord. To unplug,

grasp the plug, not the cord.

•Do not handle plug or hand vacuum with wet

hands or operate without shoes.

•Do not put any objects into openings. Do not

use with any opening blocked. Keep free of

dust, lint, hair and anything else that may

reduce air flow.

• Store your appliance indoors in a cool, dry

area.

• Keep your work area well lit.

•Do not immerse the hand vacuum into water

or other liquids.

• Keep end of hose and other openings away

from your face and body.

• Use only on dry surfaces.

• Using improper voltage may result in damage

to the motor and possible injury to the user.

Correct voltage is listed on rating label.

1. Read all instructions before using your

SHARK hand vacuum.

2. Use the system only for its intended use.

3. To protect against a risk of electric shock,

do not immerse any part of the system in

water or other liquids.

4. Never yank cord to disconnect from

outlet; instead, grasp plug and pull to

disconnect.

5. Do not allow cord to touch hot surfaces.

6. Do not pull cord around sharp corners or

close door on cord.

7. Do not operate the system with a damaged

cord or plug, or if the appliance or any other

part of the system has been dropped or

damaged. To avoid the risk of electric

shock, do not disassemble or attempt to

repair the SHARK. Return the system to

EURO-PRO Operating LLC (see warranty)

for examination and repair. Incorrect re-

assembly or repair can cause a risk of

electrical shock or injury to persons when

the SHARK is used.

8. Close supervision is necessary for any

appliance being used by or near children.

Do not leave the system unattended while

connected.

9. Keep hair, loose clothing, fingers and all

parts of body away from opening and

moving parts.

10. Do not use to pick up flammable or

combustible liquids such as gasoline or use

in areas where they may be present.

11. Do not pick up anything that is burning or

smoking such as cigarettes, matches or hot

ashes.

12. Use extra care when cleaning on stairs.

13. Do not use the hand vacuum without the

HEPA dust cup filter in place.

14. This appliance is intended only for

household use. Follow all user instructions

in this manual.

TO ORDER REPLACEMENT FILTERS

for Models EP035/EP035T2

Call: 1-866-98SHARK (1-866-987-4275)

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

FOR TECHNICAL SUPPORT

for Models EP035/EP035T2

SAVE THESE INSTRUCTIONS or

visit our website: www.sharkvac.com

Call: 1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

For Household Use Only Please Note: After each Use - Always remove the Filter Debris Screen from the HEPA Dust

Cup Filter, then vigorously “TapClean” HEPA Filter until no more dust can be removed. Filter

should be rinsed and completely dried at least once a month or when suction appears

reduced.

To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse under a

tap until all observable dirt has been removed. Some discoloration of the HEPA filter material

may occur, this is normal and will not affect the filter's performance. When finished, shake off

excess water. Do NOT wash in dishwasher.

It is important that when you wash the HEPA dust cup filter, you allow it to dry

COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT DRY IN

DRYER.

WARNING: To reduce the risk of electric shock, this appliance has a

polarized plug (one blade is wider than the other). This plug will fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician to install

the proper outlet. Do not modify the plug in any way.

Rev. 04/03C 6

OPERATING INSTRUCTIONS cont. GETTING TO KNOW YOUR SHARK HAND VACUUM

Cleaning & Changing the

HEPA Dust Cup Filter

Warning: Always unplug the unit from

electrical outlet before opening the Dust

Cup (container).

Important: Do NOT use the HEPA filter

cartridge without the debris screen in

place.

Warning:After each Use - Always

remove the Filter Debris Screen from the

HEPA Dust Cup Filter, then vigorously

“TapClean” HEPA Filter until no more

dust can be removed.

Fig. 4

Fig. 3

Debris

Screen HEPA Filter

PLEASE NOTE: The white pleated

filter material in the HEPA Dust Cup

Filter will discolor over time -This is

NORMAL and will NOT affect the

performance of the filter. If the HEPA

Dust Cup Filter

is properly

"TapCleaned”

after each use

and suction

does not return

to 100%, then

we suggest that

the HEPA filter

be “TapCleaned”

vigorously until no

more dust can be removed, then

rinsed under the faucet and allowed to

dry for 24 hours before refitting into

the vacuum. (Fig. A) Wash once a

month or when suction appears

reduced.

5. Vigorously “TapClean”

the HEPA Dust Cup

Filter on a hard

surface until no more

dust is observed

falling out from

between the pleats of

the filter. (fig. 4)

Fig. 5

Debris

Screen

6. “TapClean” the Debris

Screen or rinse under

a faucet until clean.

(fig. 5) Remember that

the Debris Screen

must be completely

dry before reinstalling

in the vacuum.

7. Replace the Debris Screen on the

HEPA Dust Cup Filter and reinstall

filter assembly in the vacuum. (not

shown)

Fig. A

Wash once a

month or when

suction

appears

reduced.

Warning: Allow 24

hours for drying before

replacing in unit.

HEPA FilterDebris Screen

IMPORTANT, Please Note : The

“TapClean” HEPA Dust Cup Filter &

Debris Screen will stop most of the tiniest

dust particles and airborne allergens from

re-entering the air you breathe. In fact it

stops 99.97% of all particles as small as

0.3 microns - many times smaller than a

human hair!!! Because of this incredible

filtration performance, the HEPA Dust Cup

Filter will quickly accumulate, inside the

white filter folds, many fine dust particles

that are difficult to see but which will

eventually block or reduce your suction

power - if not cleaned properly. Clean the

HEPA Filter and Debris Screen after each

use as described in this section.

1. To open the Dust Cup (container),

push button and detach the Dust

Cup (container ). (Fig. 1)

2. Pull out the HEPA Dust Cup Filter.

(Fig. 2)

Fig.2

Fig. 1

6. Suction Hole

7. Shoulder Strap

8. Pet Hair Removal Attachment

9. Cleaning Brush

10. Flexible Hose

11. Hepa Filter Assembly

1. Dust Cup Release Button

2. On/Off Power Switch

3. Handle

4. Intelli-Sense Filter MonitorTM

5. Dust Cup (Container)

3. Empty the dust from the Dust Cup

(container).

4. Separate the debris screen from the

HEPA filter cartridge by grasping the

debris screen with one hand and the

filter frame with the other and pull

apart. (fig. 3) Technical Specifications

Voltage: 120V., 60Hz.

Power: 6.67 Amps, 800 Watts

CAUTION:The suction hole must be

open, free of any obstructions at all

times. Otherwise, the motor will overheat

and could become damaged. 2

Specyfikacje produktu

Marka:	Shark
Kategoria:	odkurzacz
Model:	EP035T2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shark EP035T2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odkurzacz Shark

Shark Pursuit EP724 Instrukcja

14 Października 2024

Shark BU3521UK Instrukcja

8 Października 2024

Shark PowerDetect RV2820VEUK Instrukcja

8 Października 2024

Shark DuoClean Powered Lift-Away NZ801UK Instrukcja

6 Października 2024

Shark Rotator NV500 Instrukcja

6 Października 2024

Shark Dynamic CZ250UKT Instrukcja

4 Października 2024

Shark FlexBreeze FA220UK Instrukcja

3 Października 2024

Shark Wandvac WS642AE Instrukcja

2 Października 2024

Shark IZ201UK Instrukcja

2 Października 2024

Shark HydroVac WD110UK Instrukcja

26 Września 2024

Instrukcje odkurzacz

Najnowsze instrukcje dla odkurzacz

Hoover BV71_BV30011 Instrukcja

15 Października 2024

Ulsonix ASHCLEAN 20B Instrukcja

15 Października 2024

Adler AD 7064 Instrukcja

15 Października 2024

Ulsonix ASHCLEAN 20B_18V Instrukcja

15 Października 2024

AEG AEF150 Instrukcja

14 Października 2024

Severin S'powers nonstopXL MY 7115 Instrukcja

14 Października 2024

Grundig VCP 9431 PRO Instrukcja

14 Października 2024

DeLonghi XLF1200NB Instrukcja

13 Października 2024

AEG ARSB2 Instrukcja

13 Października 2024

Black & Decker VCBD8530 Instrukcja

13 Października 2024