Instrukcja obsługi SentrySafe CHW30300

SentrySafe Kluis CHW30300

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SentrySafe CHW30300 (15 stron) w kategorii Kluis. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/15
Digital Chest and File
Owner’s Manual
FHW40300
CHW30300
2
Table of Contents
WARNING
Gun warning
This product is not intended for the secure storage of all materials. Items such as firearms, other weapons,
combustible materials, or medication should NOT be stored in this unit.
NOTICE
Do NOT store delicate items directly in your safe.
SentrySafe products which offer fire protection have a proprietary insulation that has a high moisture content. In
addition, the SentrySafe advanced safes close airtight to offer water resistance, which may also cause moisture to
accumulate inside your safe.
If you choose to store delicate items such as jewelry with working parts, watches, stamps, or photos in your safe,
we recommend putting them in an air-tight container, prior to placing them in the safe for storage.
NOTE: SentrySafe will not be responsible for any damage or loss of items placed in the unit due to moisture.
Do NOT store pearls in this safe.
In the event of a fire, potential damage to delicate pearls occurs at temperatures much lower than the 350°F
interior performance measure which the UL classification performance standard indicated guarantees. Therefore,
DO NOT store pearls in your SentrySafe product.
Do NOT store computer disks, audio-visual cassettes or photo negatives.
This product is not intended to protect computer floppy or diskettes, cartridges and tapes, audio or video cassettes
or photo negatives.
Your safe is only part of your total security protection.
SentrySafe recommends that you store your safe in closets, offices, basements, bedrooms and any other locations
that are convenient for you but out of direct line of sight from prying eyes. The
location of the safe does not affect the safe’s ability to protect your valuables inside.
Warnings
4
Battery Installation / Opening
NOTE: Store code in a secure location (other than in the safe).
NOTE: SentrySafe offers a secure on-line location for the entry and retrieval of your code.
Go to and register your safe. www.registermysafe.com
Insert a credit card, identification card, or another card of a similar size in the
center slot of the battery cover. Once inserted, Remove the card, the battery
cover will pop out attached to your card.
Insert a new 9 volt Alkaline battery in the indicated area.
Reinstall the battery cover by inserting the left side with the two tabs first.
For first time use, enter the factory code, located on the back of this owners
manual, on the keypad. A green LED light will flash to indicate acceptance of
entry. Please allow for a brief delay for the lock to actuate.
Press down on lid and pull up on latch.
Battery Installation
To Open
NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery.
NOTE: If an incorrect code is entered three times, the safe will enter lockout mode.
(Red LED blinks slowly for two minutes.) Please refer to troubleshooting.
1
2
3
1
2
Programming Your Safe

Specyfikacje produktu

Marka: SentrySafe
Kategoria: Kluis
Model: CHW30300

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SentrySafe CHW30300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kluis SentrySafe

SentrySafe

SentrySafe CHW30102 Instrukcja

2 Października 2024
SentrySafe

SentrySafe SFW123CU Instrukcja

2 Października 2024
SentrySafe

SentrySafe SFW082DTB Instrukcja

2 Października 2024
SentrySafe

SentrySafe S8371 Instrukcja

2 Października 2024
SentrySafe

SentrySafe DSW3950 Instrukcja

2 Października 2024
SentrySafe

SentrySafe SFW205URC Instrukcja

2 Października 2024
SentrySafe

SentrySafe QE5541 Instrukcja

2 Października 2024
SentrySafe

SentrySafe SFW123CSB Instrukcja

2 Października 2024
SentrySafe

SentrySafe MS3607 Instrukcja

2 Października 2024
SentrySafe

SentrySafe SFW205GQC Instrukcja

2 Października 2024

Instrukcje Kluis

Najnowsze instrukcje dla Kluis

Hard Head

Hard Head 006-045 Instrukcja

1 Października 2024
Hard Head

Hard Head 006-047 Instrukcja

1 Października 2024
Hard Head

Hard Head 006-025 Instrukcja

1 Października 2024
Hard Head

Hard Head 006-292 Instrukcja

1 Października 2024
Hard Head

Hard Head 006-028 Instrukcja

1 Października 2024
Technomax

Technomax DPE Instrukcja

30 Września 2024
Technomax

Technomax GT Instrukcja

30 Września 2024
Technomax

Technomax SMT Instrukcja

30 Września 2024
Technomax

Technomax ST Instrukcja

30 Września 2024
Technomax

Technomax GMT Instrukcja

30 Września 2024