Instrukcja obsługi Sennheiser EW 122-P G3

Sennheiser odbiornik EW 122-P G3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sennheiser EW 122-P G3 (1 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
QUICK START GUIDE
Unpack items from carton (This step for EM units only) Attach antennas and
place in a “V” shape. Insert country tip into AC
adapter, it will slide in and make a positive “click”.
Insert yellow plug into back of EM receiver unit.
Plug in lavalier microphone, headset mic,
or guitar cable into bodypack transmitter
and secure by gently tightening the
locking ring (if applicable)
Insert 2 x AA (UM3) batteries into the transmitter
(bodypack or handheld), observing polarity.
(Camera sets only): Insert 2 x AA batteries into
receiver bodypack (EK100G3). Connect either the
1/8” (3.5mm) or XLR camera output cable
1. 2.
3. 4.
PREPARING DEVICE FOR USE
FREQUENCY SCAN
Power on the receiver (EM or EK unit) by pressing the ON/OFF button. On the receiver, press SET to activate
the menu. Press up/down buttons to select “Easy Setup”. Press SET and choose “Scan New List.” Press SET
once more to start scan.
After the scan is completed (about 60 seconds) the receiver will suggest a BANK to choose with the most
free channels by placing the cursor over it. Press SET to confirm this BANK. Now select a channel using the
up/down arrows and press SET to confirm. The receiver will now say “STORED.”
Tap ON/OFF to exit the menu. The frequency chosen will be displayed. You should see zero
RF/AF activity on the meter (indicating you are on a free channel).
1.
2.
3.
1. 3.2.
1. 2. 3.
1a.
1.
4.
5.
Power up the transmitter (SK, SKM) you wish to pair with the receiver. Become familiar where the
infrared (IR) window is located. On a G3 handheld transmitter, the window is located on the LCD display.
On a bodypack transmitter, it is located under the battery door just to the right of the ON/OFF button
under a purple colored plastic.
Enter SYNC mode by pressing “SYNC” button (EM receivers) or selecting SYNC option from menu
(EK receiver). Once the SYNC logo displays, hold the handheld or bodypack infrared window facing
the left side of the receiver display about 6” away. When SYNC is successful, you will see a check
mark briefly next to the SYNC logo on the receiver screen. If you see an “X” next to the SYNC logo,
it indicates the sync failed and you should repeat the SYNC process.
2.
3.
FINAL SET-UP & TIPS
It is suggested that you adjust the receiver (EM or EK) AF OUT setting to around 0dB for most situations.
The AF OUT setting is your master ouput voume.
The SENSITIVITY setting (SK and SKM transmitters only) should be adjusted so that in your loudest
passages, the indicator briefly illuminates. As the settings move closer to “0 dB” they AF PEAK SENSITIVITY
become louder.
If setting up multiple systems in the same frequency range (A/B/G), you can repeat the
process for each system. “EASY SETUP/SCAN NEW LIST/SYNC”
Be sure to choose the same number (but a different channel number) for units in the same frequency BANK
range in order to ensure trouble-free operation.
It is suggested you perform the function whenever you use your unit in a EASY SETUP/SCAN NEW LIST
different area (at a gig etc.) Open frequencies vary from one location to another.
On the receiver: The meter bars indicate status. RF (Radio Frequency) meter is akin to “bars of RF and AF
reception” on your cellphone. The AF (Audio Frequency) meter moves moves whenever audio
is transmitted through the system.
On portable camera sets the receiver will clip onto the included camera shoe mount.CA2
Sennheiser Electronic Corporation
One Enterprise Drive, Old Lyme, CT 06371
Tel: (860) 434-9190 • Fax: (860) 434-1759 www.sennheiserusa.com
2a.
1b.
2b.

Specyfikacje produktu

Marka: Sennheiser
Kategoria: odbiornik
Model: EW 122-P G3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sennheiser EW 122-P G3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Sennheiser

Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Sennheiser

Sennheiser EW 500 G4 Instrukcja

7 Września 2024
Sennheiser

Sennheiser EW 322 G3-A-EU Instrukcja

4 Września 2024
Sennheiser

Sennheiser EK 3241 Instrukcja

3 Września 2024
Sennheiser

Sennheiser EW 135-P G3 Instrukcja

1 Września 2024
Sennheiser

Sennheiser EM 9046 DRX Instrukcja

1 Września 2024
Sennheiser

Sennheiser EK 100 G4 Instrukcja

30 Sierpnia 2024
Sennheiser

Sennheiser GSX 1000 Instrukcja

20 Sierpnia 2024
Sennheiser

Sennheiser EM 300 G3-E-EU Instrukcja

20 Sierpnia 2024
Sennheiser

Sennheiser EW 122 G3-A-EU Instrukcja

20 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON

ETON MA 1 Instrukcja

19 Marca 2025
Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025