Instrukcja obsługi Seaward PH3-LLT MK2

Seaward Sprzęt pomiarowy PH3-LLT MK2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Seaward PH3-LLT MK2 (2 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
4 Specication
Output Voltage
500V DC (depending on battery
condition)
Output Current
10mA DC into 2k
Indicator
LED indication of voltage active
Dimensions
41mm (h), (w), 157mm (d) 82
Power Supply
9V DC, PP3 Alkaline Battery
IP Rating
40
Compliance
BS EN 61010
5 Maintenance
Clean only with a dry cloth; do not use solvents.
Before use, ensure unit is clean and dry; visually
inspect test terminals and case. Any damage must be
rectied to preserve user safety.
Check the battery contacts and co rtment is free mpa
of electrolytic contamination.
Any contamination of the battery contacts or
compartment should be cleaned with a dry cloth.
Always conrm that the LED indicator on the proving
unit illuminates when the test is activated. Should the
item become faulty do not open, return it to the
manufacturer or an authorised Seaward Service
Agent.
6 Battery Replacement
• Disconnect all test leads.
• Remove the battery compartment cover
• Remove the discharged battery.
• Insert the replacement battery into the battery
compartment ensuring that the battery
polarity matches the battery connector.
• place the battery compartment cover. Re
7 Service and Calibration
To maintain the specied performance, the instrument
must be veried at regular intervals by either the
manufacturer or an authorised Seaward Service
Agent. We recommend a calibration period of one
year.
For help or advice on Service and Calibration contact:
Service Department
Seaward Electronic
Bracken Hill
South West Industrial Estate
Peterlee
Co Durham SR8 2SW
England
Tel: 0191 5878739 / 0191 5878737
Email: service@seaward.com
Web: www.seaward.com
P - MK2 H3 LLT
Proving Unit
Operating Instructions
Bracken Hill
South West Industrial Estate
Peterlee
Co Durham
SR8 2SW
ENGLAND
Tel: +44(0)191 5863511
www.seaward.com
sales@seaward.com
service@seaward.com
Part Number 423A651 Revision 4
© 20 Seaward Electronic Ltd 22
Limited Warranty & Limitation of Liability
SEAWARD Electronic Limited guarantees this product to be free
from defects in material and workmanship under normal use and
service for a period of 1 year. The period of warranty will be
eective at the day of delivery.
(c) Copyright 20 22
All rights reserved. Nothing from this edition may be multiplied, or
made public in any form or manner, either electronically,
mechanically, by photocopying, recording, or in any manner,
without prior written consent from SE ARD Electronic Limited. AW
This also applies to accompanying drawings and diagrams.
Due to a policy of continuous development SE ARD Electronic AW
Limited reserves the right to alter the equipment specication and
description outlined in this publication without prior notice and no
part of this publication shall be deemed to be part of any contract
for the equipment unless specically referred to as an inclusion
within such contract.
1 Important Information
In the interest of safety the PH3-LLT MK2 should only
be used by competent suitably trained personnel after
due consideration of any hazard involve d.
The following symbols are used in these operating
instructions and on the PH3-LLT MK 2.
Warning of electrical danger!
Indicates instructions must be followed to avoid
danger to persons.
Important, follow the documentation! This
symbol indicates that the operating instructions
must be consulted and adhered to in order to
avoid danger.
Before use, ensure that both the PH3-LLT MK2 and
the LLT MK2 are clean and dry. Visually inspect all
parts of the PH3-LLT MK2 if any parts are damaged ,
do not use the PH3-LLT MK2.
Do not hold (L Line Tester) MK2 LLT ive
between the hand-guard and the contact
electrode.
Electrical shock risk!
Do not touch terminals!
Always prove the MK2 before AND after LLT
use.
Always check that the LED indi tor on the ca
proving unit is illuminated whilst testing.
If the equipment is not used in a manner
specied in the manual, the protection
provided may be impaired.
Do not use without battery compartment
cover tted.
Do not energise the proving unit r longer than 5 fo
seconds, to preserve the battery.
WEEE Directive
This product has been designed and
manufactured with high quality materials and
components, which can be recycled and
reused.
When this symbol is attached to a product it
means it is cove d by t WEEE Directive. re he
Please familiarise yourself with the appropriate local
separate collection system for electrical and electronic
products. Please dispose of this product according to
local regulations. Do not dispose of this product
along with n mal waste. The correct disposal of this or
product will help prevent potential negative
consequences for the environment and human health.
2 Environmental conditions
PH3-LLT MK2 was designed to perform test s:
• In a dry environment.
• At altitude of up to 2000 M.
• At temperature of 5-40oC without moisture
condensation.
3 Proving
The PH3- MK2 is intended to check if a LLT MK2 LLT
functions correctly.
1. Insert each probe of the LLT MK2 inside the
PH3-LLT MK2 terminals.
2. Press down on the right terminal (closest to
the battery compartment) to switch on the
PH3-LLT MK2.
3. Conrm the LE on the PH3-LLT MK2 front D
panel illuminating. is
4. If LED does NOT illuminate, replace the
battery by following 6 Battery Replacement
instruction.
5. If LED still does NOT illuminate, this su ests gg
PH3-LLT MK2 is faulty. NOT USEDO .
6. Conrm the Dual LEDs on LLT-PH3 are
illuminating.
If Dual LEDs a NOT illuminating, this re
suggests LLT MK2 is faulty O NOT USE. . D
7. Disconnect both probes from the termina ls
after test is complete.
Image above shows PH3-LLT MK2 before
switched on.
Image above shows PH3-LLT MK2 switched
on when the right terminal is pushed down.

Specyfikacje produktu

Marka: Seaward
Kategoria: Sprzęt pomiarowy
Model: PH3-LLT MK2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Seaward PH3-LLT MK2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Seaward

Seaward

Seaward Solar Survey 100 Instrukcja

2 Października 2024
Seaward

Seaward PrimeTest 250+ Instrukcja

2 Października 2024
Seaward

Seaward Solar Survey 200R Instrukcja

2 Października 2024
Seaward

Seaward PrimeTest 100 Instrukcja

2 Października 2024
Seaward

Seaward Solar Utility Pro Instrukcja

2 Października 2024
Seaward

Seaward PrimeTest 50 Instrukcja

2 Października 2024
Seaward

Seaward DO7e Instrukcja

2 Października 2024
Seaward

Seaward PV200 Instrukcja

2 Października 2024
Seaward

Seaward DO7010 Instrukcja

2 Października 2024
Seaward

Seaward DO7 Plus Instrukcja

2 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Stamos

Stamos S-LS-28 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-86 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-61 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-81 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-84 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-74 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-76 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-42 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-75 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-35 Instrukcja

15 Października 2024