Instrukcja obsługi Seal Shield SSKSV099BT

Seal Shield klawiatura SSKSV099BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Seal Shield SSKSV099BT (3 stron) w kategorii klawiatura. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

87-SEAL-SHIELD | support@sealshield.com

Product Guide

Clean Wipe™ Medical Grade Keyboard

Resistant Against:

Water

Disinfectants

Dust

Sand

Alcohol

Blood

Solvents

Humidity

Corrosives

Shock

Bleach

Heat

Salt Water

Abrasives

Dirt

Alkaline

Acid

Cold

Seal Shield, LLC Jacksonville, FL

Model: SSKSV099BT

This product is Silver Seal™ protected. It

contains an antimicrobial, fungistatic agent

which protects the product and keeps it

cleaner, greener and fresher by inhibiting

the growth of microbial bacteria, mold,

mildew and fungi on the product’s surface.

Windows® and Mac® Compatible

Requires Bluetooth® 3.0 or Later

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Seal

Shield is under license.

Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license by Apple, Inc.

Bluetooth™ 3.0 Dongle Not Included

PAIRING KEYBOARD WITH COMPUTER

Before beginning the pairing process, you will need to check to ensure that your computer is equipped with a Bluetooth Version 3.0 (or higher)

Receiver. If not, you will need to purchase a Bluetooth Version 3.0 (or later) Receiver Solution and install it correctly onto your computer. You

must ensure that all Bluetooth Receiver Solution drivers are installed, either by loading the Driver Disc that came with your Bluetooth Receiver

Solution into your computer, or by downloading the most current drivers from the Bluetooth Receiver Solution provider’s Website.

Click the “Bluetooth” icon on your computer’s taskbar to open

the Bluetooth devices window or Click the Windows (Figure 2A)

“Start Icon” and Click “Devices and Printers” (Figure 2B).

Turn the keyboard’s Power Switch to the “On” position. The Blue LED

Light will ash to let you know that the Keyboard is On (Figure 1B).

Make the Keyboard Discoverable by simultaneously pressing

“Esc” “k” and Keys. The Blue LED Light next to the Power Switch

should ash on an off repeatedly for approximately 60 seconds.

This indicates that the Keyboard is in Discovery Mode and is

ready to be Paired with the computer.

NOTE: If the “SSKSV099BT

Keyboard” icon does not

display , make the (Figure 3)

keyboard discoverable again

by simultaneously pressing

“Esc” “k” and keys. Once

Keyboard is in Discovery

Mode, click “Search Again”

in the Add a Bluetooth

Device window.

Click on the “SSKSV099BT Keyboard Icon”. This should

bring up a unique Pairing Code. Follow the screen prompt

and enter the unique Pairing Code via keyboard (Figure 4).

end into the computer s USB port. When charging, the LED Light will turn Red

until fully charged. LED Light

Power SwitchCharge Port

STEP 1:

STEP 2:

Figure 2A

STEP 3:

STEP 4:

In the Bluetooth Device window on your computer, click “Add a De-

vice”. You may also be prompted to choose a Device Type to add. If

asked for a Device Type, click on “Keyboard” or “Keyboard / Mouse”.

At this point the “SSKSV099BT Keyboard” icon should display in the

Add Bluetooth Device window on your computer (Figure 3).

If pairing was successful you will be prompted with “Device

Has Been Successfully Added to this Computer” . (Figure 5)

You can now start using your Bluetooth Keyboard.

STEP 5:

NOTE: Keyboard will go into “sleep mode” after 5 minutes of non-use.

Figure 3

Figure 4

Figure 5

Brightness Down (iPad)

Brightness Up (iPad)

Virtual Keyboard (iPad)

Main Page (iPad) / Home Page (Windows)

Language-Switch (iPad)

Screen Lock (iPad)

Previous Track (Windows, iPad)

Play / Pause (Windows, iPad)

Next Track (Windows, iPad)

Mute (Windows, iPad)

Volume Down (Windows, iPad)

Volume Up (Windows, iPad)

FN+F1

FN+F2

FN+F3

FN+F4

FN+F5

FN+F6

FN+F7

FN+F8

FN+F9

FN+10

FN+11

FN+12

HOT KEYS:

Figure 2B

NOTE: Figures may look different on

your computer depending on Bluetooth

Version and operating system.

This equipment has been tested and found to comply with the limits for a Class C digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. There is no guarantee, however, that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Properly shielded and grounded cables and connectors must be used in order to meet

FCC emission limits. Seal Shield, LLC, is not responsible for any radio or television inter-

ference caused by using other than recommended cables and connectors or by unautho-

rized changes or modications to this equipment. Unauthorized changes or modications

could void the limited warranty.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

CAUTION: Changes or modication not expressly approved by the manufacturer will void

this warranty.

FCC Compliance:

Warranty:

We warrant that the SEAL SHIELD™ keyboard or mouse for a period of 1 (one) year from

the date of purchase, be free of any defect in material and workmanship and that it will

perform in accordance with specications.

The sole obligation of this warranty shall be to either repair or replace the product upon

return to the manufacturer. There are no other warranties except as stated. There are no

warranties expressed or implied, including, but not limited to, the implied warranties of

merchantability and of tness for a particular purpose. In no event shall we be liable for

consequential, incidental, or special damages, including, but not limited to, damages or

loss of data, prots or goodwill.

Products which have been subject to abuse such as, misuse, vandalism, accident,

alteration, neglect, unauthorized repair or improper installation will not be covered by the

warranty. For more information or to make a warranty claim, please visit us on the web at

www.sealshield.com.

Disinfectant Sprays:

This product is designed to be cleaned with most medical grade, commercial grade,

antibacterial, antiviral and antifungal sprays. Thoroughly spray all surface areas, including

in-between the keys. Use cleaning products as directed and follow your cleaning proto-

cols. Wipe away excess moisture prior to use.

Disinfectant Wipes:

Alcohol based or bleach based disinfectant wipes are the fastest and easiest way to dis-

infect this product. Use cleaning products as directed and follow your cleaning protocols.

Fully Submerse in Water:

This product is designed to be fully submersed in water (IP 68 Rated). Soak product in

water using cleaning agent (safe to use a bleach solution). Use cleaning products as

directed and follow your cleaning protocols. After washing, rinse with fresh water. Shake

dry and wipe away excess moisture prior to use.

Dishwasher

This product is designed to be run through a dishwasher with dishwasher detergent. Heat

settings not to exceed 140 Degrees Fahrenheit. Place product on top rack of dishwasher.

Run in standard wash cycle with “Heated Drying” mode OFF. Remove from dishwasher

and shake dry, wipe away excess moisture prior to use.

Cleaning Methods:

IMPORTANT: Before submersing keyboard in water or running through dishwasher, Power OFF

keyboard and make sure the Charge Port Door is rmly closed.

FAQs:

Is it necessary to use the keyboard cover? No, the silicone cover is optional. It provides a

fast and easy way to wipe the keyboard clean.

Do I need to replace batteries? No, the keyboard is rechargeable and does not require

battery replacement.

How long does a single charge last? It depends on usage. In some instances, it can last

over a month, in other instances several days.

Can I overcharge the battery? No, you can charge the built-in Lithium-ion battery often as

you wish without battery degradation.

What does the LED light inside the charging port indicate?

• Blue Light Flashes for 60 seconds: Searching for a Bluetooth receiver to pair with

• Blue Light Keeps Flashing: Battery is low on power

• Red Light: Charging a low-battery, will turn-off when fully charged

I No, you must have Bluetooth 3.0 or later installed on s installation “Plug and Play”?

your computer (follow manufacturer installation instructions). Once Bluetooth Receiver is

enabled, keyboard must be paired to computer before it will function.

Can I pair keyboard to multiple computers? Only if second computer is not in the same

proximity, this allows multiple workstations to operate exclusively.

Why does keyboard hesitate sometimes?

• Keyboard is waking-up from “sleep mode”

• Battery is low on power

• Interference from another receiver (second receiver plugged into computers USB port

directly next to Bluetooth receiver can cause performance loss)

Why did my keyboard stop working?

• Battery is very low on power (it’s time to recharge)

• Bluetooth is not enabled or pairing connection was lost (see Bluetooth manufacturer

instructions and repair)

• There is another Bluetooth keyboard paired to same PC (unpair additional keyboard)

Can I use keyboard with other Bluetooth devices? Yes, keyboard will work with any Blue-

tooth enabled device (i.e. mobile phone, tablet)

Will I damage keyboard if exposed to water? No, keyboard is waterproof. Just make sure

power switch is OFF and rmly close charge door prior to submerging in water or cleaning

in dishwasher.

Specyfikacje produktu

Marka:	Seal Shield
Kategoria:	klawiatura
Model:	SSKSV099BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Seal Shield SSKSV099BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje klawiatura Seal Shield

Seal Shield SSWKSV208CH Instrukcja

1 Października 2024

Seal Shield SSWKSV208GR Instrukcja

1 Października 2024

Seal Shield SSKSV208SE Instrukcja

1 Października 2024

Seal Shield SW106G2 Instrukcja

1 Października 2024

Seal Shield STK503RED Instrukcja

1 Października 2024

Seal Shield SSWKSV208PT Instrukcja

1 Października 2024

Seal Shield SSKSV208IT Instrukcja

1 Października 2024

Seal Shield SSKSV208ES Instrukcja

1 Października 2024

Seal Shield SSKSV208PL Instrukcja

1 Października 2024

Seal Shield SSWKSV099 Instrukcja

1 Października 2024

Instrukcje klawiatura

Najnowsze instrukcje dla klawiatura

Speed-Link VIRTUIS Instrukcja

14 Października 2024

Speed-Link ATMOS Instrukcja

13 Października 2024

Targus Thura GXT 860 Instrukcja

13 Października 2024

Roland Fantom G8 Instrukcja

11 Października 2024

Yamaha Portatone PSR-160 Instrukcja

10 Października 2024

Roland E-30 Instrukcja

10 Października 2024

Yamaha Electone B-45 Instrukcja

10 Października 2024

Urban Factory GWK01UF Instrukcja

9 Października 2024

Trust 24645 Instrukcja

9 Października 2024

Goldtouch Elite GTE-08899 Instrukcja

9 Października 2024