Instrukcja obsługi SE Electronics sE8

SE Electronics mikrofon sE8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SE Electronics sE8 (24 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

sE8

U s e r M a n u a l

User Manual - EN

Thank Y ou

We would like to thank you cordially for choosing this sE microphone! This manual contains some

important instructions for setting up and operating your new equipment. Please take a few

minutes to read the instructions below carefully. We hope you will enjoy working with it as much

as we enjoyed designing and building it for you.

Most Sincerely,

Your sE Team

Brief Description

The sE8 is a high-quality small diaphragm condenser microphone intended for a wide range of

studio and live sound applications, from acoustic guitars to pianos to drums and beyond. Thanks

to its custom design, hand-crafted true condenser capsule, and transformerless output, it delivers

pristine sound quality and an even, well-balanced frequency response.

The electronics and the switchable attenuation pads ensure a high dynamic range, with high

sound pressure level (SPL) handling capability and extremely low-noise components. The

switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an

excess of bass frequencies caused by the proximity effect. This enables the sE8 to close-mic

many instruments including electric guitar speaker cabinets, brass instruments and drums.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by

the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What’s in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE

Electronics dealer and let them know.

sE8 (Single)

• sE8 microphone

• mic clip (with thread adapter)

• wind screen

sE8 (Matched Pair)

• 2x sE8 microphone

• 2x mic clip (with thread adapters)

• 2x wind screens

• stereo bar

• metal case

Controls

The sE8 features a switch for the attenuation pads and a switch for the low-cutfilters.

Attenuation Switch

The Attenuation Switch is located on the upper back side of the

microphone. When switched on, the incoming signal is reduced by

either 10 or 20 dB for capturing of loud instruments and/or close-

miking without distortion. Using the switch also helps prevent

overloading the input stage of recording interfaces, mixing desks and

microphone preamps.

Low-Cut Switch

The Low-Cut Switch is located on the front-right side of the

microphone, and inserts a low-cut filter at 80Hz (top position) or

160Hz (bottom position). The switch’s center position removes the

filter for a flat frequency response. Wind noise, plosives, footfall noise

or rumble might affect the recorded signal, so enabling the low-cut

filters reduces such unwanted noise and prevents distortion.

Additionally, the low-cut filters also minimize the proximity effect

when recording sound sources at a very short distance.

Powering

To ensure proper operation, the microphone requires a phantom power source providing 48 Volts

according toIEC 61938.

Risk of damage

Do not connect the microphone to any power supply other than a

phantom power source (input with phantom power or external IEC

standard phantom power supply) with a floating connector, using a

balanced cable with studio grade connectors to IEC 268-12 only. This is

the only way to ensure safe and reliable operation.

Safety and maintenance

Risk of damage

Please make sure that the piece of equipment to which your microphone

will be connected fulfils the safety regulations enforced in your country

and is fitted with a ground lead.

Cleaning the microphone

After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a

zipper pouch.

Technical Specification

Capsule

Hand-crafted small diaphragm true condenser capsule

Polar patterns

Cardioid

Frequency range

20 – 20,000 Hz

Sensitivity

25 mV/Pa (-32 dBV)

Max. SPL (0.5% THD)

139 / 149 / 159 dBSPL(0/10/20 dB Attenuation pad)

Equivalent noise level

13 dB(A)

Dynamic range

126 / 136 / 146 dB (0/10/20 dB Attenuation pad)

Signal- -noise ratio to

81 dB

Low cut filter

80 / 160 Hz, 6 dB/Oct, switchable

Specyfikacje produktu

Marka:	SE Electronics
Kategoria:	mikrofon
Model:	sE8
Kolor produktu:	Czarny
Wysokość produktu:	120 mm
Technologia łączności:	Przewodowa
Częstotliwość mikrofonu:	20 - 20000 Hz
Czułość mikrofonu:	-32 dB
Impedancja mikrofonu:	110 Ω
Typ kierunku mikrofonu:	Kardioid
Napięcie pracy:	48 V
Interfejs urządzenia:	XLR-3
Model:	Mikrofon studyjny
Zużycie energii:	2.7 mA
Liczba dołączonych produktów:	2 szt.
Walizka:	Tak
Waga mikrofonu:	141 g
Średnica:	23 mm
Zawartość opakowania:	2 x mic clip (with thread adapters), 2 x wind screens, stereo bar
Zakres dynamiczny mikrofonu:	146 dB
Współczynnik sygnału do szumu mikrofonu:	81 dB
Przednia szybka w zestawie:	Tak
Całkowite zniekształcenie harmoniczne mikrofonu:	0.5 %
Czułość (1 kHz):	25 mV/Pa
Typ cewki:	Skraplacz
Średnica membrany:	1000 Ω
Filtr niskokrojony:	20 dB
Równoważny poziom hałasu:	13 dB
Zalecana impedancja obciążenia:	160 Hz