Instrukcja obsługi Sanus F42OA

Sanus nieskategoryzowany F42OA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sanus F42OA (7 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
I N S T A L L A T I O N I N S T R U C T I O N S
Decorative Display Frame and
Optical Filter Kit
32", 42", and 50"
32", 42", and 50" Installation Instructions
2
DISCLAIMER
CSAV, Inc., and its affiliated corporations and subsidiaries
(collectively, "CSAV"), intend to make this manual accurate and
complete. However, CSAV makes no claim that the information
contained herein covers all details, conditions or variations, nor
does it provide for every possible contingency in connection
with the installation or use of this product. The information
contained in this document is subject to change without notice
or obligation of any kind. CSAV makes no representation of
warranty, expressed or implied, regarding the information
contained herein. CSAV assumes no responsibility for
accuracy, completeness or sufficiency of the information
contained in this document.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: IMPROPER INSTALLATION CAN LEAD TO
ACCESSORY OR DISPLAY FALLING CAUSING SERIOUS
PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is
the installer’s responsibility to make sure the combined
weight of all components attached to display does not exceed
the weight capacity of the display mount!
INTRODUCTION
TOOLS REQUIRED FOR INSTALLATION
• No tools are required for this installation
INSPECT MOUNT BEFORE ASSEMBLY
Carefully inspect mount assembly for shipping damage
(see Figure 1). If damage is apparent, call your carrier
claims agent and do not continue with installation until
the carrier has reviewed the damage.
NOTE: Thoroughly read and understand all assembly
instructions before starting installation.
Table 1: PARTS
ITEM QTY.DESCRIPTION
10 FRAME, Decorative Display 1
20 INSTRUCTIONS, Installation 1
30 LENS, Optical (when ordered sepreately) 1
WARNING: USING IMPROPER HARDWARE CAN
LEAD TO MOUNT AND/OR DISPLAY FALLING. Use
only hardware provided with mount. DO NOT
substitute!
10
30
20
Installation Instructions 32", 42", and 50"
3
For the frame to properly fit it must completely cover the bezel
on the display.
Use the figure below and the Display Compatability Tables on
page 4 to determine if frame will work with display.
The frame will fit the display if the top, side and bottom bezels
on display all measure less than 4 ½" (114mm).
To make sure frame fits display:
1. Measure width of upper bezel on display.
2. Measure the distance from the top of display to the inside of
the upper bezel (Edge of screen).
3. Record measurement.
4. Measure width of side bezels on display.
5. Measure the distance from the right or left of display to the
inside of the right or left bezel (edge of screen).
NOTE: Right and left bezels should be the same so only one
side needs to be measured.
6. Record measurement.
NOTE: The left and right side bezels will be the same width so
you only have to do this on one side of your TV.
7. Measure the width of lower bezel on display.
8. Measure the distance from the bottom of display to the
inside of the bottom bezel (edge of screen).
9. Record measurement.
NOTE: Depending on the brand and model of display, this
measurement may or may not be the same as the width
of the upper bezel.
Figure 1
Display Size Compatability Tables
TELEVISIONS MAXIMUM ALLOWABLE DIMENSIONS
Diagonal Dim. Height (inches / mm) Width (inches / mm)
32 23 31/32 (609mm) 37 3/32 (942mm)
42 28 57/64 (734mm) 45 13/16 (1164mm)
50 32 27/32 (834mm) 52 25/32 (1341mm)
Step 1
Step 2
Step 3

Specyfikacje produktu

Marka: Sanus
Kategoria: nieskategoryzowany
Model: F42OA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sanus F42OA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Sanus

Sanus

Sanus BMF522 Instrukcja

4 Lipca 2024
Sanus

Sanus BSF517 Instrukcja

4 Lipca 2024
Sanus

Sanus SOA-SW106 Instrukcja

4 Lipca 2024
Sanus

Sanus BLF528 Instrukcja

4 Lipca 2024
Sanus

Sanus SF208 Instrukcja

27 Maja 2024
Sanus

Sanus VMCA1 Instrukcja

26 Maja 2024
Sanus

Sanus VMAA26 Instrukcja

22 Maja 2024
Sanus

Sanus WSSBM1 Instrukcja

20 Maja 2024
Sanus

Sanus SA-IWB17 Instrukcja

20 Maja 2024
Sanus

Sanus NFCDII Instrukcja

19 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024