Instrukcja obsługi Samsung WW70T4040CW

Samsung pralka WW70T4040CW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samsung WW70T4040CW (116 stron) w kategorii pralka. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/116

Washing Machine

User manual

WW8*T4***** / WW7*T4*****

WW70T4040CW_04221G-00_EN.indd 1 2021/3/30 10:06:01

2 English

Contents

Safety information 4

What you need to know about the safety instructions 4

Important safety symbols 4

Important safety precautions 5

Critical installation warnings 7

Installation cautions 8

Critical usage warnings 9

Usage cautions 10

Critical cleaning warnings 14

Installation 15

What’s included 15

Installation requirements 17

Step-by-step installation 19

Before you start 29

Initial settings 29

Laundry guidelines 29

Detergent drawer guidelines 32

Operations 35

Control panel 35

Simple steps to start 36

Cycle overview 37

Settings 41

Maintenance 42

Drum clean 42

Smart check 43

Emergency drain 44

Cleaning 45

Recovery from freezing 48

Care against an extended time of disuse 48

WW70T4040CW_04221G-00_EN.indd 2 2021/3/30 10:06:01

English 3

Contents

Troubleshooting 49

Checkpoints 49

Information codes 53

Specications 56

Fabric care chart 56

Protecting the environment 57

Spare parts guarantee 57

Specication sheet 58

WW70T4040CW_04221G-00_EN.indd 3 2021/3/30 10:06:01

4 English

Safety information

Congratulations on your new Samsung washing machine. This manual contains important

information on the installation, use and care of your appliance. Please take some time to read

this manual to take full advantage of your washing machine’s many benets and features.

What you need to know about the safety instructions

Please read this manual thoroughly to ensure that you know how to safely and efciently

operate the extensive features and functions of your new appliance. Please store the manual

in a safe location close to the appliance for future reference. Use this appliance only for its

intended purpose as described in this instruction manual.

Warnings and Important Safety Instructions in this manual do not cover all possible

conditions and situations that may occur. It is your responsibility to use common sense,

caution and care when installing, maintaining and operating your washing machine.

Because the following operating instructions cover various models, the characteristics of your

washing machine may differ slightly from those described in this manual and not all warning

signs may be applicable. If you have any questions or concerns, contact your nearest service

centre or nd help and information online at www.samsung.com.

Important safety symbols

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury, death and/or property

damage.

CAUTION

Hazards or unsafe practices that may result in personal injury and/or property damage.

NOTE

Indicates that a risk of personal injury or material damage exists.

Read the instructions

These warning signs are here to prevent injury to yourself and others.

Please follow them explicitly.

After reading this manual, store it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment that uses electricity and moving parts, potential hazards exist. To

safely operate this appliance, familiarize yourself with its operation and exercise care when

using it.

WW70T4040CW_04221G-00_EN.indd 4 2021/3/30 10:06:02

English 5

Safety information

Important safety precautions

WARNING

To reduce the risk of re, electric shock, or injury to persons when

using your appliance, follow basic precautions, including the

following:

1. This appliance is not to be used by persons (including children)

with reduced physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

2. For use in Europe: This appliance can be used by children aged

from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children

without supervision.

3. Children should be supervised to ensure that they do not play

with the appliance.

4. If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualied persons in

order to avoid a hazard.

5. The new hose-sets supplied with the appliance are to be used

and old hose-sets should not be reused.

6. For appliances with ventilation openings in the base, a carpet

must not obstruct the openings.

WW70T4040CW_04221G-00_EN.indd 5 2021/3/30 10:06:02

6 English

Safety information

7. For use in Europe: Children of less than 3 years should be kept

away unless continuously supervised.

8. CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a timer,

or connected to a circuit that is regularly switched on and off

by the utility.

9. This appliance is intended to be used in household only and it is

not intended to be used such as:

− staff kitchen areas in shops, ofces and other working

environments;

− farm houses;

− by clients in hotels, motels and other residential type

environments;

− bed and breakfast type environments;

− areas for communal use in blocks of ats or in launderettes.

WW70T4040CW_04221G-00_EN.indd 6 2021/3/30 10:06:02

English 7

Safety information

Critical installation warnings

WARNING

The installation of this appliance must be performed by a qualied technician or service

company.

• Failure to do so may result in electric shock, re, an explosion, problems with the product,

or injury.

The appliance is heavy, therefore take care when lifting it.

Plug the power cord into a wall socket that meets local electrical specications. Use the

socket for this appliance only, and do not use an extension cord.

• Sharing a wall socket with other appliances using a power strip or extending the power

cord may result in electric shock or re.

• Ensure that the power voltage, frequency, and current are the same as those of the

product specications. Failure to do so may result in electric shock or re. Plug the power

plug into the wall socket rmly.

Remove all foreign substances such as dust or water from the power plug terminals and

contact points using a dry cloth on a regular basis.

• Unplug the power plug and clean it with a dry cloth.

• Failure to do so may result in electric shock or re.

Plug the power plug into the wall socket so that the cord is running towards the oor.

• If you plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or re.

Keep all packaging materials out of the reach of children as these may be dangerous.

• If a child places a bag over its head, it may suffocate.

When the appliance, power plug or power cord is damaged, contact your nearest service

centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

• This may result in electric shock, re, an explosion, or problems with the product.

• Never plug the power cord into a socket that is not grounded correctly and make sure

that it is in accordance with local and national regulations.

Do not install this appliance near a heater or any inammable material.

Do not install this appliance in a humid, oily or dusty location, or in a location exposed to

direct sunlight or water (rain drops).

Do not install this appliance in a location exposed to low temperatures.

WW70T4040CW_04221G-00_EN.indd 7 2021/3/30 10:06:02

8 English

Safety information

• Frost may cause the tubes to burst.

Do not install this appliance in a location where gas may leak.

• This may result in electric shock or re.

Do not use an electric transformer.

• This may result in electric shock or re.

Do not use a damaged power plug, damaged power cord, or loose wall socket.

• This may result in electric shock or re.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord,

insert the power cord between objects, or push the power cord into the space behind the

appliance.

• This may result in electric shock or re.

Do not pull the power cord when unplugging the power plug.

• Unplug the power plug by holding the plug.

• Failure to do so may result in electric shock or re.

This appliance should be positioned so that the power plug, the water supply taps, and the

drain pipes are accessible.

Following the repair by a non-authorized service provider, self-repair or non-professional

repair of the product, Samsung is not liable for any damage to the product, any injury or

any other product safety issue caused by any attempt to repair the product which does

not carefully follow these repair and maintenance instructions. Any damage to the product

caused by an attempt to repair the product by any person other than a Samsung certied

service provider will not be covered by the warranty.

Installation cautions

CAUTION

This appliance should be positioned in such a way that the power plug is easily accessible.

• Failure to do so may result in electric shock or re due to electric leakage.

Install your appliance on a solid, level oor that can support its weight.

• Failure to do so may result in abnormal vibrations, movement, noise, or problems with

the product.

WW70T4040CW_04221G-00_EN.indd 8 2021/3/30 10:06:02

English 9

Safety information

Critical usage warnings

WARNING

If the appliance is ooded, turn off the water & power supplies immediately and contact your

nearest service centre.

• Do not touch the power plug with wet hands.

• Failure to do so may result in electric shock.

If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug

immediately and contact your nearest service centre.

• Failure to do so may result in electric shock or re.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without

touching the power plug. Do not touch the appliance or power cord.

• Do not use a ventilating fan.

• A spark may result in an explosion or re.

Do not let children play in or on the washing machine. In addition, when disposing of the

appliance, remove the washing machine door lever.

• If trapped inside the product, children may suffocate to death.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the

washing machine before using it.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other inammable or explosive substances.

• This may result in electric shock, re, or an explosion.

Do not open the washing machine door by force while it is operating (high-temperature

washing/drying/spinning).

• Water owing out of the washing machine may result in burns or cause the oor to be

slippery. This may result in injury.

• Opening the door by force may result in damage to the product or injury.

Do not insert your hand under the washing machine while an operation is in progress.

• This may result in injury.

Do not touch the power plug with wet hands.

• This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

• Plugging the power plug into the wall socket again may cause a spark and result in

electric shock or re.

Do not let children climb in or onto the appliance.

WW70T4040CW_04221G-00_EN.indd 9 2021/3/30 10:06:02

10 English

Safety information

• This may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washing machine while it is operating.

• This may result in injury.

Do not unplug the appliance by pulling the power cord. Always grip the plug rmly and pull

it straight out of the outlet.

• Damage to the power cord may cause a short-circuit, re and/or electric shock.

Do not attempt to repair, disassemble, or modify the appliance yourself.

• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.

• When the appliance needs to be repaired or reinstalled, contact your nearest service

centre.

• Failure to do so may result in electric shock, re, problems with the product, or injury.

If the water supply hose comes loose from the water tap and oods the appliance, unplug the

power plug.

• Failure to do so may result in electric shock or re.

Unplug the power plug when the appliance is not being used for long periods of time or

during a thunder or lightning storm.

• Failure to do so may result in electric shock or re.

If any foreign substance enters into the appliance, unplug the power plug and contact you

nearest Samsung Customer Service.

• This may result in electric shock or re.

Do not let children (or pets) play in or on your washing machine. The washing machine door

does not open easily from the inside and children may be seriously injured if trapped inside.

Usage cautions

CAUTION

When the washing machine is contaminated by a foreign substance such as detergent, dirt,

food waste, etc., unplug the power plug and clean the washing machine using a damp, soft

cloth.

• Failure to do so may result in discolouration, deformation, damage, or rust.

The front glass may be broken by a strong impact. Take care when using the washing

machine.

• If the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the water tap

slowly.

WW70T4040CW_04221G-00_EN.indd 10 2021/3/30 10:06:02

12 English

Safety information

If the water temperatue is high before drain, it take time until the temperature goes down,

and it can be different depending on internal temperature.

Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a

special cycle for washing these items.

(*): Woollen bedding, rain covers, shing vests, ski pants, sleeping bags, diaper covers, sweat

suits, and bicycle, motor cycle and car covers, etc.

• Do not wash thick or hard mats even if the washing machine mark is on the care label.

This may result in injury or damage to the washing machine, walls, oor, or clothing due

to abnormal vibrations.

• Do not wash throw rugs or doormats with rubber backing. The rubber backing may come

off and stick to inside the drum, and this may result in malfunction such as a drainage

error.

Do not operate the washing machine when the detergent drawer is removed.

• This may result in electric shock or injury due to a water leak.

Do not touch the insides of the drum during or just after drying as it is hot.

• This may result in burns.

The door glass becomes hot during washing and drying. Therefore, do not touch the door

glass.

Also, do not allow children to play around the washing machine or touch the door glass.

• This may result in burns.

Do not insert your hand into the detergent drawer.

• This may result in injury as your hand may be caught by the detergent input device.

• The liquid detergent guide (applicable models only) is not used for powder detergent.

Remove the guide when using powder detergent.

Do not place any objects (such as shoes, food waste, animals) other than laundry into the

washing machine.

• This may result in damage to the washing machine, or injury and death in the case of

pets due to the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knifes, ngernails, etc.

• This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops

or massage clinics.

• This may cause the rubber seal to become deformed and result in a water leak.

Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long

periods of time.

• This may cause the drum to rust.

WW70T4040CW_04221G-00_EN.indd 12 2021/3/30 10:06:02

English 13

Safety information

• If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to

the surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry

contaminated by dry cleaning detergent.

• This may result in spontaneous combustion or ignition due to the heat from the oxidation

of the oil.

Do not use water from water cooling/heating devices.

• This may result in problems with the washing machine.

Do not use natural hand-washing soap for the washing machine.

• If it hardens and accumulates inside the washing machine, it may result in problems with

the product, discolouration, rust, or bad odours.

Place socks and brassieres in a washing net and wash them with the other laundry.

Do not wash large laundry items such as bedding in the washing net.

• Failure to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

• If it accumulates inside the washing machine, it may result in a water leak.

Make sure that the pockets of all the clothing items to be washed are empty.

• Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive

damage to the appliance.

Do not wash clothing with large buckles, buttons or other heavy metal objects.

Sort the laundry by colour on the basis of its colorfastness and select the recommended

cycle, water temperature and additional functions.

• This may result in discolouration or fabric damage.

Take care that children’s ngers are not caught in the door when you close it.

• Failure to do so may result in injury.

To prevent odours and mould, leave the door open after a wash cycle to allow the drum to

dry.

To prevent limescale build up, leave the detergent drawer open after a wash cycle and dry

inside it.

WW70T4040CW_04221G-00_EN.indd 13 2021/3/30 10:06:02

14 English

Safety information

Critical cleaning warnings

WARNING

Do not clean the appliance by spraying water directly onto it.

Do not use the a strong acidic cleaning agent.

Do not use benzene, thinner or alcohol to clean the appliance.

• This may result in discolouration, deformation, damage, electric shock or re.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

• Failure to do so may result in electric shock or re.

WW70T4040CW_04221G-00_EN.indd 14 2021/3/30 10:06:02

English 15

Installation

Follow these instructions carefully to ensure proper installation of the washing machine and

to prevent accidents when doing laundry.

What’s included

Make sure all the parts are included in the product package. If you have a problem with

the washing machine or the parts, contact a local Samsung customer centre or the retailer.

01 Release lever Detergent drawer Control panel02 03

04 05 06 Door Drum Lint lter

07 Emergency drain tube Filter cover08 09 Worktop

10 Power plug Drain hose Levelling feet11 12

WW70T4040CW_04221G-00_EN.indd 15 2021/3/30 10:06:02

16 English

Installation

Spanner Bolt caps Hose guide

Cold water hose Hot water hose Liquid detergent container

Accessories (not supplied)

• Stacking kit: SKK-DF

- Staking kit is required to stack a dryer on a washing machine.

NOTE

• Spanner: For removing the shipping bolts and levelling the washing machine.

• Bolt caps : For covering the holes after removing the shipping bolts. The provided

number of bolt caps (3 to 6) depends on the model.

• Hose guide: For hanging the drain hose in the drainpipe or wash-basin.

• Cold/Hot water hose: For supplying water to the washing machine. (Hot water hoses is for

applicable models only.)

• Liquid detergent guide: Insert it in the detergent compartment to use liquid detergent.

(Applicable models only)

WW70T4040CW_04221G-00_EN.indd 16 2021/3/30 10:06:03

English 17

Installation

Installation requirements

Electrical supply and grounding

• AC 220-240 V / 50 Hz fuse or circuit

breaker is required

• Use an individual branch circuit specic

to the washing machine

To ensure proper grounding, the washing

machine comes with a power cord featuring

a three-prong grounding plug for use in a

properly installed and grounded outlet.

Check with a qualied electrician or

serviceperson if you are not sure about the

grounding.

Do not modify the provided plug. If it does

not t the outlet, call a qualied electrician

to install a proper outlet.

WARNING

• Do NOT use an extension cord.

• Use only the power cord that comes

with the washing machine.

• Do NOT connect the ground wire to

plastic plumbing, gas lines, or hot water

pipes.

• Improperly connected grounding

conductors may cause electric shock.

Water supply

A proper water pressure for this washing

machine is between 50 kPa and 800 kPa.

Water pressure less than 50 kPa may cause

the water valve not to close completely. Or,

it may take longer to ll the drum, causing

the washing machine to turn off. Water taps

must be within 120 cm from the rear of the

washing machine so that the provided inlet

hoses reach the washing machine.

To reduce the risk of leaks:

• Make sure water taps are easily

accessible.

• Turn off the taps when the washing

machine is not in use.

• Check for any leaks at the water inlet

hose ttings on a regular basis.

CAUTION

Before using the washing machine for the

rst time, check all connections at the water

valve and taps for any leaks.

Drain

Samsung recommends a standpipe in

height of 60~90 cm. The drain hose must

be connected through the hose clip to the

standpipe, and the standpipe must fully

cover the drain hose.

WW70T4040CW_04221G-00_EN.indd 17 2021/3/30 10:06:03

18 English

Installation

Flooring

For best performance, the washing

machine must be installed on a solid oor.

Wood oors may need to be reinforced

to minimize vibration and/or unbalanced

loads. Carpeting and soft tile surfaces are

not a good resistance to vibrations and may

cause the washing machine to move slightly

during the spin cycle.

CAUTION

Do NOT install the washing machine on a

platform or a poorly supported structure.

Water temperature

Do not install the washing machine in areas

where water may freeze as the washing

machine always retains some water in its

water valves, pumps, and/or hoses. Frozen

water left in the connection parts may

cause damage to belts, the pump, and other

components of the washing machine.

Alcove or closet installation

Minimum clearance for stable operation:

Sides Rear25 mm 50 mm

Top 25 mm Front 550 mm

If both the washing machine and a dryer

are installed in the same location, the front

of the alcove or closet must have at least

a 550 mm unobstructed air opening. Your

washing machine alone does not require a

specic air opening.

WW70T4040CW_04221G-00_EN.indd 18 2021/3/30 10:06:03

English 19

Installation

Step-by-step installation

STEP 1 Select a location

Location requirements:

• Solid, level surface without carpeting or ooring that may obstruct ventilation

• Away from direct sunlight

• Adequate room for ventilation and wiring

• The ambient temperature is always higher than the freezing point (0 ˚C)

• Away from a heat source

STEP 2 Remove the shipping bolts

Unpack the product package and remove all shipping bolts.

NOTE

Number of shipping bolts may differ depending on the model.

WARNING

• Packaging materials can be dangerous to children. Dispose all packaging material (plastic

bags, polystyrene, etc.) out of children’s reach.

• To avoid injury, cover the holes with bolt caps after removing the shipping bolts. Do not

move the washing machine without the shipping bolts in place. Assemble the shipping

bolts before moving the washing machine to another location. Keep the shipping bolts in

a safe place for future use.

WW70T4040CW_04221G-00_EN.indd 19 2021/3/30 10:06:03

20 English

Installation

1. Locate the shipping bolts (marked with

circle in the gure) on the rear side of

the washing machine.

CAUTION

Do not remove the screw (A) that xes the

hose clip.

2. Using the supplied spanner, loosen all

the shipping bolts by turning them

counterclockwise.

NOTE

You must keep the shipping bolts for future

use.

WW70T4040CW_04221G-00_EN.indd 20 2021/3/30 10:06:03

English 21

Installation

3. Insert the to the holes bolt caps (B)

(marked with circle in the gure).

STEP 3 Adjust the levelling feet

1. Gently slide the washing machine into

position. Excessive force may damage

the levelling feet.

2. Level the washing machine by manually

adjusting the levelling feet.

WW70T4040CW_04221G-00_EN.indd 21 2021/3/30 10:06:04

22 English

Installation

3. When levelling is complete, tighten the

nuts using the spanner.

CAUTION

When installing the product make sure the

levelling feet is not pressing the power cord.

CAUTION

Make sure all the levelling feet are seating on the oor surface to avoid the washing machine

from moving or generating noise due to vibration Then, check if the washing machine is not

rocking. If the washing machine is not rocking, tighten the nuts.

WW70T4040CW_04221G-00_EN.indd 22 2021/3/30 10:06:04

English 23

Installation

STEP 4 Connect the water hose

The provided water hose may differ depending on the model. Please follow the instruction

according to the provided water hose.

Connecting to a threaded water tap

1. Connect the water hose to the water tap,

and then turn the connector clockwise as

shown.

2. Connect the other end of the water

hose to the inlet valve on the back of

the washing machine. Turn the hose

clockwise to tighten.

3. Open the water tap and check if there

are any leaks around the connection

areas. If there are water leaks, repeat the

steps above.

WARNING

If there is a water leak, stop operating the washing machine and disconnect from the

electrical supply. Then, contact a local Samsung service centre in case of a leak from the

water hose, or contact a plumbing technician in case of a leak from the water tap. Otherwise,

this may cause electric shock.

WW70T4040CW_04221G-00_EN.indd 23 2021/3/30 10:06:04

24 English

Installation

CAUTION

Do not stretch the water hose by force. If the hose is too short, replace the hose with a

longer, high-pressure hose.

Connecting to a non-threaded water tap

1. Remove the from the water adaptor (A)

hose (B).

2. Use a Phillips screwdriver to loosen four

screws on the adaptor.

3. Hold the adaptor and turn in the part (C)

arrow direction to loosen it by 5 mm (*).

WW70T4040CW_04221G-00_EN.indd 24 2021/3/30 10:06:04

English 25

Installation

4. Insert the adaptor onto the water tap,

and then tighten the screws while lifting

the adaptor.

5. Turn part (C) in the arrow direction to

tighten it.

6. While pulling down on the part (D)

water hose, connect the water hose to

the adaptor. Then, release . The part (D)

hose ts into the adaptor with a clicking

sound.

7. To complete connecting the water hose,

see 2 and 3 on the “Connecting to a

threaded water tap” section.

NOTE

• After connecting the water hose to the adaptor, pull the water hose down to check if it is

connected properly.

• Use a popular type of water taps. If the tap is square-shaped or too big, remove the

spacer ring before inserting the tap into the adaptor.

WW70T4040CW_04221G-00_EN.indd 25 2021/3/30 10:06:04

26 English

Installation

For models with an additional hot water inlet:

1. Connect the red end of the hot water

hose to the hot water inlet on the back

of the machine.

2. Connect the other end of the hot water

hose to the hot water tap.

Aqua stop hose (applicable models only)

The aqua stop hose alerts users of a risk of

water leaks. It senses the water ow and

turns red on the centre indicator (A) in case

of a leak.

NOTE

The end of the aqua stop hose must be tted to the water tap and not the machine.

WW70T4040CW_04221G-00_EN.indd 26 2021/3/30 10:06:05

English 27

Installation

STEP 5 Position the drain hose

The drain hose can be positioned in three ways:

Over the edge of a wash basin

The drain hose must be placed at a height

of between 60 cm and 90 cm (*) from the

oor. To keep the spout of the drain hose

bent, use the supplied plastic hose guide (A).

Secure the guide to the wall using a hook to

ensure stable drainage.

In a drain pipe

The drain pipe should be between 60 cm

and 90 cm high (*). It is advisable to use a

65 cm high vertical pipe.

• To ensure the drain hose stays in

position, use the plastic hose guide

provided (see the gure).

• To prevent the siphoning of water ow

during drainage, make sure to insert the

drain hose 15 cm in the drain pipe.

• To prevent the drain hose from moving

around, secure the hose guide to the

wall.

Drain standpipe requirements:

• Minimum diameter of 5 cm

• Minimum carry-away capacity of 60

litres per minute

WW70T4040CW_04221G-00_EN.indd 27 2021/3/30 10:06:05

28 English

Installation

In a sink drain pipe branch

The drain pipe branch mush be above the

sink siphone so that the end of the hose is

at least 60 cm above the ground.

(*) : 60 cm

CAUTION

Remove the lid on the sink drain pipe

branch before connecting the drain pipe to

it.

CAUTION

Do not put the drain hose in places of

stagnant water or ponding. The water may

ow back to the washing machine.

STEP 6 Turn on the washing machine

Plug the power cord into a wall socket that is correctly rated, grounded, and protected by a

fuse or circuit breaker. Then, press to turn on the washing machine.Power

WW70T4040CW_04221G-00_EN.indd 28 2021/3/30 10:06:05

English 29

Before you start

Initial settings

Run Calibration (recommended)

Calibration ensures accurate weight detection by the washing machine. Make sure the drum

is empty before running Calibration.

1. Power off, and then power on the washing machine.

2. Hold down

Temp. Delay Endand simultaneously for 3 seconds to enter

Calibration mode. The “ ” message appears.CB

3. Press run the Calibration cycle. Start/Pause to

4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.

5. When the cycle is complete, “ ” appears on the display and the washing machine will turn 0

off automatically.

6. The washing machine is now ready for use.

Laundry guidelines

STEP 1 Sort

Sort the laundry according to these criteria:

• Care Label: Sort the laundry into cottons, mixed bres, synthetics, silks, wools, and rayon.

• Colour: Separate whites from colours.

• Size: Mixing different-sized items together in the drum improves the washing

performance.

• Sensitivity: Wash delicate items separately using an Easy Iron option for pure, new

woollen items, curtains, and silk items. Check the labels on the items.

NOTE

Make sure to check the care label on the clothing, and sort them accordingly before starting

the wash.

STEP 2 Empty pockets

Empty all the pockets of your laundry items

• Metal objects such as coins, pins, and buckles on clothing may damage other laundry

items as well as the drum.

WW70T4040CW_04221G-00_EN.indd 29 2021/3/30 10:06:05

30 English

Before you start

Turn clothing with buttons and embroideries inside out

• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers

should be closed and xed with a string.

• Clothing with long strings may become entangled with other clothes. Make sure to tie the

strings before starting the wash.

STEP 3 Use a laundry net

• Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres

may break through and tear other laundry items.

• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become

caught around the door. Place them inside a ne laundry net.

• Do not wash the laundry net by itself without other laundry. This may cause abnormal

vibrations that could move the washing machine and result in injury.

STEP 4 Prewash (if necessary)

Select the Prewash option for the selected cycle if the laundry is heavily soiled. Do not use

the Prewash option when detergent is manually added into the drum.

STEP 5 Determine the load capacity

Do not overload the washing machine. Overloading may cause the washing machine to not

wash properly. For the load capacity for the type of clothing, see page 37.

NOTE

When washing bedding or bedding covers, the wash time may be lengthened or the spin

efciency may be reduced. For bedding or bedding covers, the recommended maximum spin

cycle speed is 800 rpm, and the load capacity is 2 kg or less.

CAUTION

• Unbalanced laundry may reduce the spinning performance.

• Make sure the laundry is fully inserted in the drum and not caught in the door.

• Do not slam the door. Close the door gently. Otherwise, the door may not be closed

properly.

STEP 6 Apply a proper detergent type

The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool),

colour, wash temperature, and degree of soiling. Always use “low suds” laundry detergent,

which is designed for automatic washing machines.

WW70T4040CW_04221G-00_EN.indd 30 2021/3/30 10:06:05

English 31

Before you start

NOTE

• Follow the detergent manufacturer’s recommendations based on the weight of the

laundry, the degree of soiling, and the hardness of the water in your local area. If you are

not sure about the water hardness, contact a local water authority.

• Do not use detergent that tends to be hardened or solidied. This detergent may remain

after the rinse cycle, blocking the drain outlet.

CAUTION

When washing wool using the WOOL/DELICATES cycle, use only a neutral liquid detergent.

If used with the WOOL/DELICATES cycle, powder detergent may remain on the laundry and

discolour the laundry.

Laundry capsules

To get the best results from using laundry capsules, please follow these instructions.

1. Put the capsule in the bottom of the

empty drum towards the rear.

2. Put the laundry in the drum on top of

the capsule.

CAUTION

For cycles using cold water or cycles that complete in less than one hour, the capsule may not

dissolve completely.

WW70T4040CW_04221G-00_EN.indd 31 2021/3/30 10:06:06

32 English

Before you start

Detergent drawer guidelines

The washing machine provides a three-compartment dispenser: the left compartment for the

main wash, the centre compartment for fabric softeners, and the right compartment for the

preliminary wash.

01 Prewash compartment: Apply

prewash detergent.

02 Main-wash compartment: Apply

main-wash detergent, water softener,

soaking detergent, bleach, and/or stain

removers.

03 Softener compartment: Apply

additives such as fabric softener. Do not

exceed the max line (A).

CAUTION

• Do not open the detergent drawer while the washing machine is operating.

• Do not use the following types of detergent:

• Tablet or capsule types

• Ball or net types

• To prevent the compartment clogging, concentrated or highly-enriched agents (fabric

softener or detergent) must be diluted with water before being applied.

• When Delay End is selected, do not apply detergent directly into the drum. Otherwise,

this may discolour the laundry. Use the detergent drawer when Delay End is selected.

• Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum

deteriorates the washing performance.

To apply washing agents to the detergent drawer

1. Slide open the detergent drawer.

2. Apply laundry detergent to the .

main-wash compartment as instructed

or recommended by the manufacturer.

To use liquid detergent, see page 34.

WW70T4040CW_04221G-00_EN.indd 32 2021/3/30 10:06:06

English 33

Before you start

3. Apply fabric softener to the softener

compartment. Do not exceed the max

line (A).

4. If you want to prewash, apply

prewash detergent to the prewash

compartment as instructed or

recommended by the manufacturer.

5. Close the detergent drawer.

CAUTION

• Do not apply powder detergent to the

liquid container.

• Concentrated fabric softener must be

diluted with water before applied.

• Do not apply main-wash detergent to

the softener compartment.

WW70T4040CW_04221G-00_EN.indd 33 2021/3/30 10:06:06

34 English

Before you start

To use liquid detergent (applicable models only)

First insert the provided liquid container

in the main-wash compartment. Then,

apply liquid detergent to the container

below the marked max line (A).

CAUTION

• Do not exceed the max line that is

marked inside the container.

• Turn up the liquid container if using

powder detergent.

When using liquid detergent When using powder detergent

WW70T4040CW_04221G-00_EN.indd 34 2021/3/30 10:06:06

English 35

Operations

Control panel

03 04 05 06 07

01 Cycle Selector Turn the dial to select a cycle.

02 Display The display shows current cycle information and estimated time

remaining, or an information code when a problem occurs.

03 Temp. Press to change the water temperature for the current cycle.

04 Spin

Press to change the spinning speed for the selected cycle.

• Rinse Hold (No indicator): The nal rinse cycle is suspended so

that the laundry remains in the water. To unload the laundry, run

a drain or spin cycle.

• No Spin : The drum does not spin after the nal drain cycle.

• Spin Only : To run the Spin Only cycle, press Spin for 3

seconds. When the cycle time and spinning speed appear, press

Spin repeatedly until a desired spinning speed is selected. Then,

press Start/Pause to start the cycle. The spinning time depends

on the selected cycle.

05 Options Press to select the options. Availability of the options depends on

the cycle.

Delay End

Delay End lets you set the end time of the current cycle. Based

on your settings, the start time of the cycle will be determined

by the machine’s internal logic. For example, this setting is useful

for programming your machine to nish a wash at the time you

normally return home from work.

• Press to choose a preset unit of hours.

Soak Press to activate/deactivate the Soak function. This function helps

remove a wide variety of stubborn stains.

WW70T4040CW_04221G-00_EN.indd 35 2021/3/30 10:06:07

36 English

Operations

Start/Pause Press to start or stop operation.

Power Press to turn on/off the washing machine.

For more information on the options, see the Special features section.

*(3 sec) : Press and hold for 3 seconds.

Simple steps to start

1. Press

Power to turn on the washing machine.

2. Turn the Cycle Selector to select a cycle.

3. Change the cycle settings ( Temp. Spin, and ) as necessary.

4. To add an option, press . Use the button again to choose a preferred item.Options

5. The machine provides two easy to access buttons for

Delay End and

Soak for your

convenience. If you want to use one of these options, press the corresponding button.

6. Press

Start/Pause.

To change the cycle during operation

1. Press Start/Pause to stop operation.

2. Select a different cycle.

3. Press Start/Pause again to start the new cycle.

WW70T4040CW_04221G-00_EN.indd 36 2021/3/30 10:06:07

English 37

Operations

Cycle overview

Standard ccycles

Cycle Description

Max load

(kg)

8kg 7kg

COTTON

• For cottons, bed linens, table linens, underwear, towels,

or shirts.

The washing time and the rinse count are

automatically adjusted according to the load.

Max Max

E-COTTON

• Optimal performance with lower energy for cotton

fabrics, bed linens, table linens, underwear, towels, or

shirts.

For energy saving, the actual washing temperature

may be lower than specied.

Max Max

SYNTHETICS • For fabrics that are made of polyester(diolen, trevira),

polyamide (perlon, nylon), or the like. 4.0 4.0

RINSE+SPIN • Featuring an additional rinse process after applying

fabric softener to the laundry. Max Max

DRAIN/SPIN

• For draining the water inside the drum and running an

additional spin process to effectively remove moisture

from laundry.

Max Max

DRUM CLEAN

• Cleans the drum by removing dirt and bacteria from it.

• Perform once every 40 washes with no detergent or

bleach applied. It noties automatically after every 40

washes.

• Make sure the drum is empty.

• Do not use any cleaning agents for cleaning the drum.

- -

15’ QUICK WASH

• For lightly soiled items in less than 2.0 kg that you

want to wash quickly.

• Use less than 20 g of detergent. Using more than 20 g

of detergent may leave detergent residue.

• For liquid detergent, use a max of 20 ml of liquid

detergent.

2.0 2.0

DAILY WASH For everyday items such as underwear and shirts.• 4.0 4.0

WW70T4040CW_04221G-00_EN.indd 37 2021/3/30 10:06:08

38 English

Operations

Cycle Description

Max load

(kg)

8kg 7kg

WOOL/

DELICATES

• Specic for machine-washable wool and delicates

fabrics such as sheer fabrics, bras, lingerie (silk), and

other handwash-only fabrics.

• The WOOL/DELICATES cycle features gentle cradling

and soaking to protect bres from shrinkage/

distortion.

• A neutral detergent and liquid detergent is

recommended.

2.0 2.0

HYGIENE STEAM

• Cotton and linen fabric which have been in direct

contact with the skin, such as underwear.

• For optimum hygiene results select a temperature of

60 °C or above.

• Steam cycles feature allergy care and bacteria

elimination (sterilize).

4.0 4.0

COLOURS

• Featuring additional rinses and reduced spinning to

ensure that the laundry is washed gently and rinsed

thoroughly.

4.0 4.0

BEDDING

• For bed spreads, bed sheets, bedding covers, etc.

• For best results, wash only 1 type of bedding. and

make sure the load weighs less than 2.0 kg.

2.0 2.0

WW70T4040CW_04221G-00_EN.indd 38 2021/3/30 10:06:08

English 39

Operations

NOTE

• Loading the household washing machine or the household washer-dryer up to the

capacity indicated by the manufacturer for the respective cycles will contribute to energy

and water savings.

• The noise and remaining moisture content are inuenced by the spinning speed: the

higher the spinning speed in the spinning phase, the higher the noise and the lower the

remaining moisture content.

• The most efcient cycle in terms of energy consumption are generally those that perform

at lower temperatures and longer duration.

Options

Option Description

Intensive • For badly soiled laundry. The operation time for each cycle is

longer than normal.

Pre Wash • This will add a preliminary washing cycle before the main

wash cycle.

Rinse+ • Press this button to add additional rinse cycles.

WW70T4040CW_04221G-00_EN.indd 39 2021/3/30 10:06:08

40 English

Operations

Delay End

You can set the washing machine to nish your wash automatically at a later time, choosing a

delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time

the wash will nish.

1. Select a cycle. Then change the cycle settings if necessary.

2. Press Delay End repeatedly until a desired end time is set.

3. Press Start/Pause.

The corresponding indicator turns on with the clock running.

4. To cancel the , restart the washing machine by pressing Delay End Power.

Real-life case

You want to nish a two-hour cycle 3 hours later from now. For this, you add the Delay End

option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m. Then,

what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m.

Provided below is the time line for this example.

2:00 pm

Set the Delay End to 3 hours

3:00 pm

Start

5:00 pm

End

WW70T4040CW_04221G-00_EN.indd 40 2021/3/30 10:06:08

English 41

Operations

Settings

Child Lock

To prevent children or infants from

accidentally starting or setting the washing

machine, Child Lock locks all buttons except

for the button.Power

• To set the Child Lock function, hold down

Temp. Spin and simultaneously for

3 seconds. To activate, press

Start/ Pause.

• To release the Child Lock function,

hold down Temp. Spin and

simultaneously for 3 seconds.

NOTE

• In the Child Lock state, you must rst

release the Child Lock if you want to add

detergent or laundry.

• Your setting will be kept even after

restarting the machine.

• You cannot open the door after a wash

cycle when the Child Lock is on. Turn the

function off before opening the door to

take out the laundry.

Sound On/Off

You can turn on or off the sound from the

washing machine. When this function is set

to Off, the melody of cycle completion, and

the power-off beep will not sound. However,

the other sounds stay active.

• To mute the sound, hold down Spin

and Options simultaneously for

3 seconds.

• To unmute the sound, hold down again

for 3 seconds.

• Your setting will be kept even after

restarting the machine.

WW70T4040CW_04221G-00_EN.indd 41 2021/3/30 10:06:09

42 English

Maintenance

Keep the washing machine clean to prevent deteriorated performance and to preserve its life

cycle.

Drum clean

Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats

the water between 60 °C and 70 °C.

1. Press Power to turn on the washing machine.

2. Turn the to select Cycle Selector DRUM CLEAN.

3. Press Start/Pause.

NOTE

• The water temperature for is set to 70 °C, which cannot be changed.DRUM CLEAN

• It is recommended to run the cycle once every 40 washes.DRUM CLEAN

• To prevent limescale, add the proper amount of detergent according to your local water

hardness or add a water softener additive together with the detergent.

DRUM CLEAN reminder

Depending on the model, the DRUM CLEAN reminder is either an icon or an LED.

For icons, the icon lights up on the control panel.

For LEDs, the LED lights up next to DRUM CLEAN, or on the option area of the control panel.

• The DRUM CLEAN reminder blinks on the control panel once every 40 washes. It is

advisable to perform regularly.DRUM CLEAN

• When you rst see this reminder blinking, you can ignore the reminder for 6 consecutive

washes. From the 7th wash, the reminder no longer appears. However, it appears again on

the second 40th wash.

• Even after the last process is terminated, the “ ” message may remain.0

• You can record the running count of the DRUM CLEAN cycle by pressing the Power

button. This does not stop or turn off the machine but marks your cycle count.

• Even if “0” does not disappear, the machine operates normally.

• It is recommended to run the cycle regularly for hygienic purposes.

WW70T4040CW_04221G-00_EN.indd 42 2021/3/30 10:06:09

English 43

Maintenance

Smart check

To enable this function, you must rst download the Samsung Smart Washer app at the Play

Store or the Apple Store, and install it on a mobile device featuring a camera function.

The Smart Check function has been optimized for Galaxy & iPhone series (applicable models

only).

1. When the washing machine detects an issue to check, an information code appears on

the display. To enter Smart Check mode, press and hold and Options

Delay End

simultaneously for 3 seconds.

2. The washing machine starts the self-diagnosis procedure and displays an information

code if a problem is detected.

3. Run the Samsung Smart Washer app on your mobile device, and tap Smart Check.

4. Put the mobile device close to the washing machine’s display so that the smartphone

camera and the washing machine face each other. Then, the information code will be

recognised automatically by the app.

5. When the information code is recognised correctly, the app provides detailed information

about the problem with applicable solutions.

NOTE

• The function name, Smart Check, may differ depending on the language.

• If the washing machine reets light on the display, the app may fail to recognize the

information code.

• If the app fails to recognize the Smart Check code consecutively, enter the information

code manually onto the app screen.

WW70T4040CW_04221G-00_EN.indd 43 2021/3/30 10:06:09

44 English

Maintenance

Emergency drain

In case of a power failure, drain the water inside the drum before taking out the laundry.

1. Power off and unplug the washing

machine from the electrical outlet.

2. Gently press the top area of the lter

cover (A) to open.

3. Put an empty, spacious container around

the cover, and stretch the emergency

drain tube to the container while holding

the tube cap (B).

4. Open the tube cap and let water in the

Emergency drain tube (C) ow into the

container.

5. When done, close the tube cap, and

reinsert the tube. Then, close the lter

cover.

NOTE

Use a spacious container because the water

in the drum may be more than expected.

WW70T4040CW_04221G-00_EN.indd 44 2021/3/30 10:06:10

English 45

Maintenance

Cleaning

Surface of the washing machine

Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the

washing machine.

Mesh lter

Clean the mesh lter of the water hose once or twice a year.

1. Turn off the washing machine, and

unplug the power cord.

2. Close the water tap.

3. Loosen and disconnect the water hose

from the back of the washing machine.

Cover the hose with a cloth to prevent

water from gushing out.

4. Use pliers to pull out the mesh lter

from the inlet valve.

5. Submerge the mesh lter deeply in

water so that the threaded connector is

also submerged.

6. Dry the mesh lter completely in the

shade.

7. Reinsert the mesh lter into the inlet

valve, and reconnect the water hose to

the inlet valve.

8. Open the water tap.

NOTE

If the mesh lter is clogged, an information code of “ ” appears on the screen.4C

WW70T4040CW_04221G-00_EN.indd 45 2021/3/30 10:06:10

46 English

Maintenance

Debris lter

Clean the debris lter bi-monthly to prevent clogging. A clogged debris lter may reduce the

bubble effect.

1. Turn off the washing machine, and

unplug the power cord.

2. Drain the remaining water inside the

drum. See the “Emergency drain”

section.

3. Gently press the top area of the lter

cover to open.

4. Turn the to the left, debris lter knob

and drain off the remaining water.

5. Clean the debris lter using soft brushes.

Make sure the drain pump propeller

inside the lter is unclogged.

6. Reinsert the debris lter, and turn the

lter knob to the right.

NOTE

• Some debris lters feature a safety knob

that is designed to prevent accidents

by children. To open the safety knob

of the debris lter, push in and turn it

anticlockwise. The spring mechanism of

the safety knob helps open the lter.

• To close the safety knob of the debris

lter, turn it clockwise. The spring makes

a rattling sound, which is normal.

NOTE

If the debris lter is clogged, an information code of “ ” appears on the screen.5C

CAUTION

• Make sure the lter cap is closed properly after cleaning the lter. Otherwise, this may

cause a leak.

WW70T4040CW_04221G-00_EN.indd 46 2021/3/30 10:06:10

English 47

Maintenance

• Make sure the lter is inserted properly after cleaning it. Otherwise, this may cause an

operational failure or a leak.

Detergent Drawer

1. While holding down the release lever (A)

on the inner of the drawer, slide open

the drawer.

2. Clean the drawer components in owing

water using a soft brush.

3. Clean the drawer recess using a bottle

brush to remove detergent residues and

limescale on the drawer recess.

4. Reinsert the release lever and the liquid

detergent container to the drawer.

5. Slide the drawer inward to close it.

NOTE

To remove remaining detergent, perform the cycle with the drum being empty.RINSE+SPIN

WW70T4040CW_04221G-00_EN.indd 47 2021/3/30 10:06:10

48 English

Maintenance

Recovery from freezing

The washing machine may freeze when it drops below 0 °C.

1. Turn off the washing machine, and unplug the power cord.

2. Pour warm water over the water tap to loosen the water hose.

3. Disconnect the water hose, and soak it in warm water.

4. Pour warm water into the drum and leave it for about 10 minutes.

5. Reconnect the water hose to the water tap.

NOTE

If the washing machine still doesn’t operate normally, repeat the above steps until it operates

normally.

Care against an extended time of disuse

Avoid leaving the washing machine unused for an extended time.

If this is the case, drain the washing machine and unplug the power cord.

1. Turn the to select a Cycle Selector RINSE+SPIN.

2. Empty the drum, and press Start/Pause.

3. When the cycle is complete, close the water tap and disconnect the water hose.

4. Turn off the washing machine, and unplug the power cord.

5. Open the door to let air circulate through the drum.

WW70T4040CW_04221G-00_EN.indd 48 2021/3/30 10:06:10

English 49

Troubleshooting

If there is any problem, check the information message on the LED screen and follow the on-

screen instructions.

If the problem persists, please contact the service center.

Checkpoints

If you encounter a problem with the washing machine, rst check the table below and try the

suggestions.

Problem Action

Does not start.

• Make sure the washing machine is plugged in.

• Make sure the door is properly closed.

• Make sure the water taps are open.

• Tap

Start/Pause to start the washing machine.

• Make sure Child Lock

is not activated.

• Before the washing machine starts to ll, it will make a series

of clicking noises to check the door lock and will do quick

drain.

• Check the fuse or reset the circuit breaker.

• Check if power is supplied properly.

• Low voltage detected.

- Check if the power cord is plugged in.

• Make sure laundry is not caught in the door.

Water supply is

insufcient, or no

water is supplied.

• Fully open the water tap.

• Make sure the door is properly closed.

• Make sure the water supply hose is not frozen.

• Make sure the water supply hose is not kinked or clogged.

• Make sure there is sufcient water pressure.

• Make sure that the cold water tap and the hot water tap are

properly connected.

• Clean the mesh lter as it may be clogged.

After a cycle,

detergent remains in

the detergent drawer.

• Make sure the washing machine is running with sufcient

water pressure.

• Make sure the detergent is added to the centre of the

detergent drawer.

• Make sure the rinse cap is inserted properly.

• If using granular detergent, make sure the detergent selector is

in the upper position.

• Remove the rinse cap and clean the detergent drawer.

WW70T4040CW_04221G-00_EN.indd 49 2021/3/30 10:06:11

50 English

Troubleshooting

Problem Action

Excessive vibrations

or makes noise.

• Make sure the washing machine is installed on a level, solid

oor that is not slippery.

If the oor is not level, use the levelling feet to adjust the

height of the washing machine.

• Make sure the shipping bolts are removed.

• Make sure the washing machine is not in contact with any

other object.

• Make sure the laundry load is balanced.

• The motor can cause noise during normal operation.

• Overalls or clothes with metallic decorations can cause noise

while being washed. This is normal.

• Metal objects such as coins can cause noise. After washing,

remove these objects from the drum or lter case.

• Redistribute the load. If only one item of clothing needs

washing, such as a bathrobe or pair of jeans, the nal spin

result might be unsatisfactory, and a “ ” check message will Ub

be shown in the display.

Does not drain and/

or spin.

• Make sure the drain hose is straightened all the way to the

drain system. If you encounter a drain problem, call for service.

• Make sure the debris lter is not clogged.

• Close the door and press or tap Start/Pause.

For your safety, the washing machine will not tumble or spin

unless the door is closed.

• Make sure the drain hose is not frozen or clogged.

• Make sure the drain hose is connected to a drain system that is

not clogged.

• If the washing machine is not supplied with sufcient power,

the washing machine temporarily will not drain or spin. As

soon as the washing machine regains sufcient power, it will

operate normally.

• Make sure the drain hose is positioned correctly, depending on

the connection type.

• Clean the debris lter as it may be clogged.

WW70T4040CW_04221G-00_EN.indd 50 2021/3/30 10:06:11

English 51

Troubleshooting

Problem Action

The door does not

open.

• Press or tap Start/Pause to stop the washing machine.

• It may take a few moments for the door lock mechanism to

disengage.

• The door will not open until 3 minutes after the washing

machine has stopped or the power has been off.

• Make sure all the water in the drum is drained.

• The door may not open if water remains in the drum. Drain the

drum and open the door manually.

• Make sure the door lock light is off. The door lock light turns

off after the washing machine has drained.

Excessive suds.

• Make sure you use the recommended types of detergent as

appropriate.

• Use high efciency (HE) detergent to prevent oversudsing.

• Reduce the detergent amount for soft water, small loads, or

lightly soiled loads.

• Non-HE detergent is not recommended.

Cannot apply

additional detergent.

• Make sure the remaining amount of detergent and fabric

softener is not over the limit.

Stops.

• Plug the power cord into a live electrical outlet.

• Check the fuse or reset the circuit breaker.

• Close the door and press or tap Start/Pause to start the

washing machine.

For your safety, the washing machine will not tumble or spin

unless the door is closed.

• Before the washing machine starts to ll, it will make a series

of clicking noises to check the door lock and will do quick

drain.

• There may be a pause or soak period in the cycle. Wait briey,

and the washing machine may start.

• Make sure the mesh lter of the water supply hose at the

water taps is not clogged. Periodically clean the mesh lter.

• If the washing machine is not supplied with sufcient power,

the washing machine will temporarily not drain or spin. As

soon as the washing machine regains sufcient power, it will

operate normally.

WW70T4040CW_04221G-00_EN.indd 51 2021/3/30 10:06:11

52 English

Troubleshooting

Problem Action

Fills with the wrong

water temperature.

• Fully open both taps.

• Make sure the temperature selection is correct.

• Make sure the hoses are connected to the correct taps. Flush

water lines.

• Make sure the water heater is set to supply a minimum of

49 °C hot water at the tap. Also, check the water heater

capacity and recovery rate.

• Disconnect the hoses and clean the mesh lter. The mesh lter

may be clogged.

• While the washing machine lls, the water temperature may

change as the automatic temperature control feature checks

incoming water temperature. This is normal.

• While the washing machine lls, you may notice just hot and/

or just cold water going through the dispenser when cold or

warm temperatures are selected.

This is a normal function of the automatic temperature

control feature as the washing machine determines the water

temperature.

Load is wet at the

end of a cycle.

• Use the High or Extra High spin speed.

• Use high efciency (HE) detergent to reduce oversudsing.

• Load is too small. Small loads (one or two items) may become

unbalanced and not spin completely.

• Make sure the drain hose is not kinked or clogged.

Leaks water.

• Make sure the door is properly closed.

• Make sure all hose connections are tight.

• Make sure the end of the drain hose is correctly inserted and

secured to the drain system.

• Avoid overloading.

• Use high efciency (HE) detergent to prevent oversudsing.

• Check the drain hose.

- Make sure the end of the drain hose is not placed on the

oor.

- Make sure the drain hose is not clogged.

Has odours.

• Excessive suds collect in recesses and can cause foul odours.

• Run cleansing cycles to sanitize periodically.

• Clean the door seal (diaphragm).

• Dry the washing machine interior after a cycle has nished.

WW70T4040CW_04221G-00_EN.indd 52 2021/3/30 10:06:11

English 53

Troubleshooting

Problem Action

No bubbles are seen

(Bubble models only).

• You may not be able to see bubbles if there is too much items

in the drum.

• Severely contaminated laundry may not generate bubbles.

If a problem persists, contact a service center.

Information codes

If the washing machine fails to operate, you may see an information code on the screen.

Check the table below and try the suggestions.

Code Action

Water is not supplied.

• Make sure the water taps are open.

• Make sure the water hoses are not clogged.

• Make sure the water taps are not frozen.

• Make sure the washing machine is operating with sufcient

water pressure.

• Make sure that the cold water tap and the hot water tap are

properly connected.

• Clean the mesh lter as it may be clogged.

• When the “4C” message appears, the machine drains water for

3 minutes. In the meantime, the power button will be disabled.

4C2

• Make sure the cold water supply hose is rmly connected to

the cold water tap.

If it is connected to the hot water tap, the laundry may be

deformed with some cycles.

Water is not draining.

• Make sure the drain hose is not frozen or clogged.

• Make sure the drain hose is positioned correctly, depending on

the connection type.

• Clean the debris lter as it may be clogged.

• Make sure the drain hose is straightened all the way to the

drain system.

• If the information code remains, contact a customer service

centre.

WW70T4040CW_04221G-00_EN.indd 53 2021/3/30 10:06:11

54 English

Troubleshooting

Code Action

Operating the washer with the door open.

• Make sure the door is properly closed.

• Make sure laundry is not caught in the door.

Water has overowed.

• Restart after spinning.

• If the information code remains on the display, contact a local

Samsung service centre.

LC, LC1

Check the drain hose.

• Make sure the end of the drain hose is not placed on the oor.

• Make sure the drain hose is not clogged.

• If the information code remains, contact a customer service

centre.

Check the Motor for operation.

• Try restarting the cycle.

• If the information code remains, contact a customer service

centre.

The electronic control needs to be checked (Over Voltage Error).

• Check the PCB and wire harness.

• Check if power is supplied properly.

• If the information code remains, contact a customer service

centre.

Low voltage detected.

• Check if the power cord is plugged in.

• If the information code remains, contact a customer service

centre.

High temperature heating check.

• If the information code remains, contact a customer service

centre.

The Water Level sensor is not working properly.

• Try power off and restarting the cycle.

• If the information code remains, contact a customer service

centre.

• When the “4C” message appears,

the washer do draining for 3

minutes. During this time, the Power button is inoperative.

WW70T4040CW_04221G-00_EN.indd 54 2021/3/30 10:06:11

English 55

Troubleshooting

Code Action

The MEMS sensor is not working properly.

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a customer service

centre.

Check communications between main and sub PBAs.

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a customer service

centre.

AC6

Check communications between main and inverter PBAs.

• Depending on the state, the machine may automatically returns

to normal operation.

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a customer service

centre.

DC1

The Main Door lock/unlock is not working properly.

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a customer service

centre.

The machine does not turn off automatically after the last

spinning process, and the “0” message remains.

• The machine operates normally without running the DRUM

CLEAN cycle. However, it is recommended to run the cycle for

hygienic purposes.

If any information code keeps appearing on the screen, contact a local Samsung service

centre.

WW70T4040CW_04221G-00_EN.indd 55 2021/3/30 10:06:11

56 English

Specications

Fabric care chart

The following symbols provide garment care directions. The care labels include four symbols

in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The

use of symbols ensures consistency among garment manufacturers of domestic and imported

items. Follow the care label directions to maximize garment life and reduce laundry problems.

Resistant material Do not iron

Delicate fabric Can be dry cleaned using any

solvent

Item can be washed at 95 ˚C Dry Clean

Item can be washed at 60 ˚C

Dry clean with perchloride,

lighter fuel, pure alcohol or

R113 only

Item can be washed at 40 ˚C Dry clean with aviation fuel,

pure alcohol or R113 only

Item can be washed at 30 ˚C Do not dry clean

Hand wash only Dry at

Dry clean only Can be hung to dry

Can be bleached in cold water Dry on clothes hanger

Do not bleach Tumble dry, normal heat

Can be ironed at 200 ˚C max Tumble dry, reduced heat

Can be ironed at 150 ˚C max Do not tumble dry

Can be ironed at 100 ˚C max

WW70T4040CW_04221G-00_EN.indd 56 2021/3/30 10:06:13

English 57

Specications

Protecting the environment

• This appliance is manufactured from recyclable materials. If you decide to dispose of this

appliance, please observe local waste disposal regulations. Cut off the power cord so that

the appliance cannot be connected to a power source. Remove the door so that animals

and small children cannot get trapped inside the appliance.

• Do not exceed the detergent quantities recommended in the detergent manufacturer’s

instructions.

• Use stain removal products and bleaches before the wash cycle only when strictly

necessary.

• Save water and electricity by only washing full loads (the exact amount depends upon

the program used).

Spare parts guarantee

We guarantee that the following spare parts will be available to professional repairers and

end-users for a minimum period of 10 years after placing the last unit of the model on the

market.

• Door, door hinges and seals, other seals, door locking assembly, and plastic peripherals

such as detergent dispensers.

WW70T4040CW_04221G-00_EN.indd 57 2021/3/30 10:06:13

58 English

Specications

Specication sheet

“ * ” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).

Type Front loading washing machine

Model name WW8*T4*4***

WW8*T4*2***

WW7*T4*4***

WW7*T4*2***

Dimensions

A (Width)

600 mm

B (Height)

850 mm

C (Depth)

550 mm

630 mm

1072 mm

Water pressure 50 kPa ~ 800 kPa

NET weight 65 kg 65 kg

Wash and spin capacity 8.0 kg 7.0 kg

Power

consumption

Washing and

heating

220 V 1900 W

240 V 2300 W

Spin revolutions

WW8*T4*4***

WW7*T4*4***

WW8*T4*2***

WW7*T4*2***

1400 RPM 1200 RPM

NOTE

The design and specications are subject to change without notice for quality improvement

purposes.

WW70T4040CW_04221G-00_EN.indd 58 2021/3/30 10:06:14

WW70T4040CW_04221G-00_EN.indd 59 2021/3/30 10:06:14

DC68-04221G-00

QUESTIONS OR COMMENTS?

REGION CALL OR VISIT US ONLINE AT

HONG KONG SAR

3698 4698 www.samsung.com/hk/support (Chinese)

www.samsung.com/hk_en/support (English)

MACAU SAR 0800 333

WW70T4040CW_04221G-00_EN.indd 60 2021/3/30 10:06:14

洗衣機

使用說明書

WW8*T4***** / WW7*T4*****

WW70T4040CW_04221G-00_HKTC.indd 1 2021/3/30 10:05:00

2 繁體中文

安全注意事項 4

安全須知 4

重要安全符號 4

重要安全事項 5

有關安裝的嚴重警告事項 6

安裝注意事項 7

嚴重使用警告 7

使用注意事項 9

嚴重清潔警告 11

安裝 12

包含內容 12

安裝要求 14

逐步安裝 16

開始之前 26

初始設置 26

洗衣常識及竅門 26

洗滌劑抽屜指南 29

操作 32

控制面板 32

簡單啟動步驟 33

程式概觀 34

設置 38

維護 39

筒清潔  39

Smartcheck  40

緊急排水 41

清潔 42

凍結後恢復 45

長時間不用時的護理 45

WW70T4040CW_04221G-00_HKTC.indd 2 2021/3/30 10:05:00

4 繁體中文

安全注意事項

感謝您選用新型三星洗衣機。該說明書包括關於安裝、使用和保養的重要信息。請仔細閱讀本說明

書，以便您能充分利用本洗衣機的優點和特質。

安全須知

請仔細通讀本說明書，以保證您掌握怎樣安全且有效地操作該新型洗衣機的多種特質和功能。請將手

冊保存在靠近電器的安全地方以備將來參閱。該洗衣機只可用於使用說明書中所述的目的。

本說明書中的警告和重要安全指示並非包括所有可能發生的情况。您應當依照常識、警告和注意事項

來安裝，維護和操作該洗衣機。

由於以下操作指示包括不同型號的洗衣機，因此您所使用的洗衣機的特質可能與本說明書所述內容略

有不同，並非所有警告標誌均適用。如有任何疑問或問題，請聯繫離您附近的客服中心，或通過網址

www.samsung.com獲取網上幫助和信息。

重要安全符號

本使用說明書中圖示及符號的含義：

警告

危險或不安全的操作可能。導致嚴重人身傷亡和/或財産損失

小心

危險或不安全的操作可能。導致輕微人身傷害和/或財産損失

注意

存在人身傷害或財產損失的危險。

閱讀說明

上述警告標誌用於避免您和他人受傷。

請嚴格遵守指示。

閱讀完本手冊後，將它存放在安全地方以備將來參閱。

請在使用本洗衣機之前仔細閱讀說明書並謹慎操作。

任何電器和移動部件的設備使用時均有潜在危險。爲了安全起見，操作本洗衣機時請仔細閱讀說明書

並謹慎操作。

WW70T4040CW_04221G-00_HKTC.indd 4 2021/3/30 10:05:01

繁體中文 5

安全注意事項

重要安全事項

警告

為了降低火災、觸電或人身傷害的風險，在使用該電器時請遵循下列基本注意

事項：

1. 有身體、感覺或智力障礙，或缺少經驗及知識的人士（包括兒童）只

有在監護人監護或指導下方可使用本設備，以確保安全使用。

2. 適用於歐洲：本設備可供8歲以上兒童以及有身體、感覺或智力障礙或

者缺少經驗及知識的人士使用，唯須有監護人監護或指導，以確保安

全使用本設備且瞭解可能的危險。兒童不得玩耍本設備。不得由兒童

且無指導下進行清潔和使用維護。

3. 應對兒童進行監督，以確保兒童不會在洗衣機周圍玩耍。

4. 若電源線損壞，則必須由製造廠商、服務代理商或類似的合格人員進

行更換，以免發生危險。

5. 請使用附帶的新水管，而不應再使用舊水管。

6. 若底部有通風口，則必須確保通風口未被地毯阻塞。

7. 適用於歐洲：3歲以下兒童應遠離此設備，除非在監督的情況下。

8. 小心：為避免因不小心重設熱斷路器而造成危險，本設備不得透過外

部開關裝置（例如計時器）供電，或連接至電力公司會定期開關電源

的電路。

9. 本產品僅供家庭使用，不得用於：

- 商店，辦公室和其他工作環境中的員工廚房區域;

- 農舍;

- 酒店，汽車旅館和其他住宅類型的環境;

- 住宿加早餐旅馆;

- 公寓樓或自動洗衣店中共用的區域。

WW70T4040CW_04221G-00_HKTC.indd 5 2021/3/30 10:05:01

6 繁體中文

安全注意事項

有關安裝的嚴重警告事項

警告

本洗衣機必須由合格的技術人員或維護公司進行安裝。

• 否則可能導致觸電、火災、爆炸、洗衣機故障或人身傷害。

本電器沉重，因此提升時必須小心。

將電源線插頭插入符合當地電氣規程的牆上插座。使用專用於本設備的插座，并且不要使用延長線。

• 如果通過使用電源板或延長電源綫，與其他電器共用一個墻裝插座，則可能導致觸電或火災。

• 確保電壓、頻率和電流與産品規格相一致。否則可能導致觸電或火災。請將電源插頭牢牢地插入

壁式插座。

用乾布定期將電源插頭的異物（例如灰塵或水）清除。

• 拔出電源插頭，用乾布將其擦乾淨。

• 否則可能導致電擊或火災。

將電源插頭插入墻裝插座，使電源線朝地板延伸。

• 如果您沿著相反方向將電源插頭插入墻裝插座，則可能損壞電纜內部的電綫，並導致觸電或火

災。

由於材料可能存在危險，將所有包裝材料放置在兒童無法接觸的地方。

• 如果小孩將包裝袋置於頭上，則可能導致窒息。

當洗衣機、插頭或電源綫損壞時，請聯繫最近的客服中心。

該洗衣機必須接地。

不得將該洗衣機接至氣管、塑膠水管或電話綫。

• 否則可能導致觸電、火災、爆炸或洗衣機故障。

• 決不可將電源綫插入沒有正確接地的插座，並確保符合當地和國家電氣規程。

切勿將本電器安裝在加熱器或任何易燃材料附近。

不可將該洗衣機安裝於潮濕、多油或多灰塵的位置、或者直接暴露於陽光或雨水（雨滴）。

切勿將本電器安裝在低溫的位置。

• 霜凍可能引起管道爆裂。

不可將該洗衣機安裝於可能出現氣體洩漏的位置。

• 否則可能導致觸電或火災。

不可使用電子變壓器。

• 否則可能導致電擊或火災。

不可使用損壞的電源插頭、電源綫或者鬆動的墻裝插座。

• 否則可能導致電擊或火災。

不可拉升或過分彎曲電源綫。

WW70T4040CW_04221G-00_HKTC.indd 6 2021/3/30 10:05:01

繁體中文 7

安全注意事項

不可扭曲或纏繞電源綫。

不可用金屬物體勾住電源綫，或將重物置於電源綫上，或將電源綫插在兩個物體之間，或將電源綫塞

入該洗衣機後面的空隙中。

• 否則可能導致觸電或火災。

拔掉電源插頭時不可拖拉電源綫。

• 握住電源插頭，再將其拔出。

• 否則可能導致觸電或火災。

應該將本設備放在易於連接電源插座、進水水龍頭和排水道的地方。

在非授權服務商維修、自行維修或非專業維修後，三星不對因未認真遵守這些維修和維護說明而導致

的產品損壞、傷害或其他產品安全問題負責。由三星認證服務提供者以外的任何人嘗試維修產品而造

成的產品損壞不在保修範圍內。

安裝注意事項

小心

本電器應該安裝在輕鬆接觸電源插頭的地方。

• 否則可能因爲漏電而導致觸電或火災。

將您的電器安裝在可以支撐其重量的堅固水平地面。

• 否則可能産生異常振動、移動、噪音或洗衣機故障。

嚴重使用警告

警告

如果電器被水淹，請立即關閉供水和電源並聯絡最近的服務中心。

• 不可用濕手觸摸電源插頭。

• 否則可能導致觸電。

如果該洗衣機發出奇怪的噪音、燃燒氣味或煙霧，請立即拔出電源插頭，並聯繫離您最近的客服中

心。

• 否則可能導致觸電或火災。

如果出現氣體洩漏（例如丙烷氣體、煤氣等），請不要觸摸插頭，立即進行通風。不可觸摸洗衣機或

電源綫。

• 不可使用通風機。

• 火花可能導致爆炸或火災。

WW70T4040CW_04221G-00_HKTC.indd 7 2021/3/30 10:05:01

8 繁體中文

安全注意事項

禁止小孩在洗衣機裏面或上面玩耍。此外，在廢棄該洗衣機時，應將洗衣機的門把手移除。

• 如果被困在產品內，兒童可能會窒息死亡。

確保在使用洗衣機之前將底部的包裝物（海綿等）移除。

不可洗滌被汽油、煤油、苯、塗料稀釋劑、酒精或其他易燃或易爆物污染的衣物。

• 否則可能導致觸電、火災或爆炸。

當洗衣機正在運行（高溫洗滌/烘乾/脫水）時，不可強行打開機門。

• 如果水流溢出洗衣機可能引起燙傷或地板濕滑，從而導致受傷。

• 強行打開洗衣機門可能導致洗衣機損壞或人身傷害。

洗衣機正在運行時切勿將手插入洗衣機下面。

• 從而導致受傷。

不可用濕手觸摸電源插頭。

• 否則可能導致觸電。

當洗衣機正在運行時，不可通過拔出電源插頭來關閉洗衣機。

• 否則將電源插頭重新插入墻裝插座時，可能引起火花並導致觸電或火災。

切勿讓兒童爬進電器或爬上電器。

• 這樣可能會導致觸電、燒傷或傷害。

當洗衣機正在運行時，不可將手伸入洗衣機或放入金屬物體。

• 從而導致受傷。

切勿拉扯電源線拔出電器插頭。始終緊握插頭將其直接拉出電源插座。

• 電源線的損壞可能導致短路、火災和/或觸電。

不可試圖擅自修理、拆卸或改裝洗衣機。

• 不可使用除標準保險絲以外的任何其他保險絲（例如：銅絲或鋼絲等）。

• 當電器需要維修或重新安裝時，請聯絡最近的服務中心。

• 否則可能導致觸電、火災、洗衣機故障或人身傷害。

如果供水軟管從水龍頭鬆脫並淹沒電器，請拔出電源插頭。

• 否則可能導致觸電或火災。

當長時間不使用洗衣機時，或打雷、暴雨天氣時，請拔出電源插頭。

• 否則可能導致觸電或火災。

如果異物進入電器，請拔出電源插頭並聯絡最近的三星客戶服務站。

• 否則可能導致觸電或火災。

請勿讓兒童（或寵物）在洗衣機上面或內部玩耍。洗衣機門無法輕易從裏邊打開，兒童如果被困在機

內會導致嚴重受傷。

WW70T4040CW_04221G-00_HKTC.indd 8 2021/3/30 10:05:01

繁體中文 9

安全注意事項

使用注意事項

小心

當洗衣機被異物（例如去污劑、灰塵、食品廢物等）污染時，請拔出電源插頭並用濕潤的軟布清潔洗

衣機。

• 否則可能導致變色、變形、損壞或生銹。

強烈撞擊可能損壞前門玻璃。使用洗衣機時請注意。

• 如果玻璃被損壞，可能導致人身傷害。

停水之後或重新連接供水軟管時，請緩慢打開水龍頭。

長久時間不用之後，緩慢打開水龍頭。

• 供水軟管或水管中的氣壓可能損壞產品部件或導致漏水。

如果運行期間出現排水問題，請檢查是否存在排水故障。

• 如果洗衣機正在使用時由於排水問題被淹沒，則可能導致觸電或火災。

將待洗衣物完全放入洗衣機中，確保衣物不會被門卡住。

• 如果衣物被門卡住，可能導致衣物或洗衣機損壞或漏水。

洗衣機不用時，請關閉供水。

確保供水連接軟管上的螺絲適當擰緊。

• 否則可能導致財産損壞或人身傷害。

確保橡膠密封和前門玻璃沒有被異物（例如廢棄物、線、頭髮等）污染。

• 如果異物被門卡住或閘未完全閉合，則可能導致漏水。

打開水龍頭，並檢查供水連接軟管是否被擰緊，確保在使用前不會漏水。

• 如果供水軟管連接器上的螺絲鬆脫，則可能導致漏水。

您購買的本產品專為家庭使用而設計。

將產品用於商業用途可視為產品濫用。在此情況下，產品將不在三星提供的標準保修範圍之列，並且

三星對因濫用而導致的故障或損壞概不負責。

不可站立在洗衣機上，或將物體（如衣物、點亮的蠟燭、香煙、碗碟、化學藥品、金屬物體等）放置

在洗衣機上。

• 否則可能導致觸電、火災、洗衣機故障或人身傷害。

不可將揮發性物質（如殺蟲劑）噴灑在洗衣機表面。

• 否則會有害於人體，可能導致觸電、火災或洗衣機故障。

切勿在洗衣機附近放置會產生電磁場的物品。

• 否則可能由於故障而導致人身傷害。

高溫清洗或烘乾程式排出的水是熱的。切勿觸摸。

WW70T4040CW_04221G-00_HKTC.indd 9 2021/3/30 10:05:01

10 繁體中文

安全注意事項

• 否則可能導致燙傷或其他傷害。

如果在排水之前水溫很高，則需要一段時間直到溫度下降，並且根據內部溫度可能會有所不同。

除非您的洗衣機有洗滌以下物品的特殊程式，否則不可對防水墊或防水衣物（*）進行洗滌、脫水或烘

乾。

(*):羊毛被褥、防雨罩、釣魚服、滑雪褲、睡袋、尿布兜、運動套裝，以及單車、電單車和汽車罩等。

• 即使說明標簽上有洗衣機標誌，也不可洗滌硬質厚墊。否則可能因爲異常振動而導致受傷，或洗

衣機、墻體、地面或衣物損壞。

• 切勿清洗具有橡膠背襯的小塊地毯或地墊。橡膠背襯可能脫落並粘附在洗衣桶內，這樣可能會發

生故障，例如排水錯誤。

當洗滌劑抽屜被移除時，不可操作洗衣機。

• 否則可能因爲漏水而導致觸電或受傷。

在烘乾期間，或烘乾完之後，洗衣桶溫度很高，不可觸摸其內部。

• 否則可能導致燙傷。

門玻璃在清洗和乾燥過程中會變熱。因此，請勿觸摸門玻璃。

另外，請勿讓兒童在洗衣機旁玩耍或觸摸門玻璃。

• 否則可能導致燙傷。

不可將手伸入洗滌劑抽屜。

• 因為您的手可能會被洗滌劑輸入裝置卡住而導致受傷。

• 液體洗滌劑盒（適用型號）不可使用粉狀洗滌劑。如果使用粉末狀洗滌劑請取出液體洗滌劑盒。

不可將非衣物類的任何其他物品（例如鞋子、食物垃圾或動物）放入洗衣機。

• 否則可能損壞洗衣機，或由於異常振動而導致寵物受傷或死亡。

不可使用利器（例如針、刀或手指甲等）來按動按鈕。

• 否則可能導致觸電或受傷。

不可洗滌被油漬、乳酪弄髒、或護膚店、按摩診所經常使用的衣物。

• 否則可能導致橡膠密封變形和漏水。

不可將金屬物長時間遺留在洗衣桶中，例如安全別針、髮夾或漂白劑。

• 否則可能導致洗衣桶生銹。

• 如果洗衣桶表面開始生銹，則將清潔劑（中性）塗抹在表面上，並用海綿清洗。禁止使用金屬

刷。

不可直接使用乾洗劑，不可對被乾洗劑弄髒的衣物進行洗滌、洗清、或脫水。

• 否則可能因爲油的氧化物變熱而導致自燃或灼燒。

不可使用來自水冷卻/加熱裝置的水。

• 否則可能引起洗衣機故障。

不可將手洗肥皂用於該洗衣機。

WW70T4040CW_04221G-00_HKTC.indd 10 2021/3/30 10:05:01

繁體中文 11

安全注意事項

• 如果該肥皂變硬並積聚在洗衣機內部，則可能引起洗衣機故障、變色、生銹或異味。

將短襪和胸圍放入洗滌網，並和其他衣物一起洗滌。

不可在洗滌網內洗滌大件物品，例如被褥。

• 否則可能因爲異常振動而導致受傷。

不可使用變硬的洗滌劑。

• 如果它積聚在洗衣機內部，則可能導致漏水。

確保所有待洗衣物的口袋清空。

• 硬質和鋒利物體，例如硬幣、安全銷、釘子、螺絲或石頭等，可能導致洗衣機的損壞。

帶金屬的內衣在洗滌過程中可能會有金屬穿破內衣的現象，

根據其色牢度按照顏色對衣物進行分類並選擇推薦的程式、水溫和其他功能。

• 否則可能會導致褪色或織物受損。

關門時注意兒童的手指有沒有被門卡住。

• 否則可能會導致傷害。

為防止異味和黴菌，在洗滌結束後保持機門打開，以使滾桶乾燥。

為了防止水垢堆積，洗滌結束後，將洗滌劑抽屜打開，並在裡面晾乾。

嚴重清潔警告

警告

不可直接用水噴灑在洗衣機上進行清洗。

請勿使用強酸洗劑。

不可用苯、稀釋劑或酒精清洗該洗衣機。

• 否則可能導致變色、變形、損壞、觸電或火災。

在清洗或進行維護前，將插頭從墻裝插座中拔出。

• 否則可能導致觸電或火災。

WW70T4040CW_04221G-00_HKTC.indd 11 2021/3/30 10:05:01

12 繁體中文

安裝

請仔細遵循這些說明，確保正確安裝洗衣機並避免洗衣時出現意外。

包含內容

確保產品包中包含所有部件。如果您對洗衣機或部件有何疑問，請聯繫當地三星客戶中心或零售

商。

01 02 03 釋放杆洗滌劑抽屜控制面板

04 05 06 機門洗衣桶毛屑過濾器

07 08 09 緊急排水軟管底部擋板頂蓋

10 11 12 電源插頭排水管調整腳

WW70T4040CW_04221G-00_HKTC.indd 12 2021/3/30 10:05:01

繁體中文 13

安裝

扳手螺栓孔蓋水管定位器

冷水管熱水管液體洗滌劑盒

配件（未提供）

• 堆疊套件：SKK-DF

-堆疊套件用於在洗衣機上堆疊乾衣機。

注意

• 扳手：用於拆卸運輸螺栓和調平洗衣機。

• 螺栓孔蓋：用於在拆卸運輸螺栓後蓋住螺栓孔。所提供的螺栓蓋數量（3至6）取決於型號。

• 水管定位器：用於在排水管或洗臉盆內懸掛排水軟管。

• 冷水管/熱水管：用於為洗衣機供水。（熱水軟管僅適用於適用型號。）

• 液體洗滌劑盒:將其插入洗滌劑料盒中，使用液體洗滌劑。（僅適用型號）

WW70T4040CW_04221G-00_HKTC.indd 13 2021/3/30 10:05:01

14 繁體中文

安裝

安裝要求

供電和接地

• 220-240V、50Hz的保險絲或斷路器

• 為洗衣機供電的專用分支電路

為確保正確接地，洗衣機附帶一根具有三腳接地

插頭的電源線，用於安裝正確且接地的插座。

如果不確定是否接地，請諮詢合格電工或維修人

員。

請勿改裝提供的插頭。如果與插座不匹配，請致

電合格電工安裝匹配的插座。

警告

• 請勿使用延長線。

• 請僅使用洗衣機配備的電源線。

• 請不要把接地線連在塑膠管、煤氣管道或者

熱水管道上。

• 連接不正確的接地導線可能導致觸電。

供水

此洗衣機的合適水壓介於50kPa至800kPa之間。

當水壓低於50kPa時可能會導致水閥失靈。或者

可能需要更長的時間來注滿桶，也會導致洗衣機

關機。進水龍頭必須在您洗衣機後部的120cm

範圍以內，以便進水管方便連接您的洗衣機和水

龍頭。

預防漏水的風險：

• 確保水龍頭方便連接。

• 當洗衣機不使用的時候，關掉水龍頭。

• 定期檢查進水軟管裝置是否有任何洩漏。

小心

在使用您的洗衣機前，應先檢查進水閥和水龍頭

上所有的連接以防漏水。

排水

三星建議使用高度為60-90cm的垂直管道。排水

管必須經由排水管夾延伸至垂直管道。而垂直管

道必須完全蓋住排水管。

WW70T4040CW_04221G-00_HKTC.indd 14 2021/3/30 10:05:02

繁體中文 15

安裝

室內地面

為了獲得最佳性能，洗衣機必須安裝在牢固的地

面上。為了使振動或不平衡的負荷最小化，木地

板需要進一步加固。地毯和軟瓷磚表面抗振效果

不佳，可能導致洗衣機在脫水程序中有稍許移

動。

小心

不要把您的洗衣機放在平臺或者支撐較弱的結構

上。

水溫

不要把洗衣機放置在水易結冰的地方，因為您的

洗衣機的水閥、排水泵和/或軟管等處會殘留一

些水。留在連接部件中的冷凍水可能導致皮帶、

泵和洗衣機中的其他組件損壞。

洗衣機安裝環境要求

實現穩定操作的最小間隙：

兩側 25mm 後面 50mm

頂部 25mm 前面 550mm

若您將洗衣機和乾衣機放置在一起，則您需要確

保在機器前預留至少550mm的暢通空間。若您

只單獨放置一台洗衣機，則不需要特定的空間要

求。

WW70T4040CW_04221G-00_HKTC.indd 15 2021/3/30 10:05:02

16 繁體中文

安裝

逐步安裝

步驟1 選擇安裝位置

位置要求：

• 安裝在堅硬平坦的水平地面，沒有可能妨礙通風的地毯或地板等

• 避免日光直射

• 有用於通風和佈線的足夠空間

• 環境溫度始終高於冰點(零度)

• 始終遠離熱源

步驟2 拆除運輸螺栓

拆開產品包裝，取出所有的運輸螺栓。

注意

運輸螺釘的數量可能因型號而異。

警告

• 包裝材料可能對兒童有危險。請把所有包裝材料(塑膠袋、聚苯乙烯等)置於兒童不能觸及的地方。

• 為避免受傷，拆下裝運螺栓後，用螺栓蓋蓋住螺栓孔。在裝運螺栓未就位的情況下，請勿移動洗

衣機。在將洗衣機移動到另一個位置之前，裝上裝運螺栓。將裝運螺栓放在安全的地方以備將來

使用。

WW70T4040CW_04221G-00_HKTC.indd 16 2021/3/30 10:05:02

繁體中文 17

安裝

1. 運輸螺栓放置在洗衣機後側（圖中標有圓

圈）。

小心

請勿卸下固定排水管夾的。螺絲（A）

2. 使用隨附的扳手，逆時針旋轉所有運輸螺

栓，將其鬆開。

注意

存妥運輸螺釘，以供日後使用。

WW70T4040CW_04221G-00_HKTC.indd 17 2021/3/30 10:05:02

18 繁體中文

安裝

3. 將插入孔中（圖中標有圓螺栓孔蓋（B）

圈）。

步驟3 調整平衡支腳

1. 輕輕將洗衣機滑動至適當的位置。用力過大

可能會損壞平衡支腳。

2. 手動調節平衡支腳，調平洗衣機。

WW70T4040CW_04221G-00_HKTC.indd 18 2021/3/30 10:05:02

繁體中文 19

安裝

3. 完成調平後，使用扳手擰緊螺母。

小心

安裝產品時，請確保調平腳不壓在電源線上。

小心

確保所有調平腳都位於地板上，以避免因洗衣機移動或振動而產生噪音。然後，檢查洗衣機是否沒有

搖晃。如果洗衣機沒有搖晃，擰緊螺母。

WW70T4040CW_04221G-00_HKTC.indd 19 2021/3/30 10:05:03

20 繁體中文

安裝

步驟4 連接水管

提供的水管因型號而異。根據提供的水管按照說明進行操作。

連接螺紋水龍頭

1. 將水管連接到水龍頭，然後如圖所示順時針

旋轉連接器。

2. 將水管的另一端連接至洗衣機背部的進水

閥。順時針方向旋轉軟管以擰緊。

3. 打開水龍頭，檢查連接周圍是否有任何漏

水。如果有漏水，則重複上述步驟。

警告

如果漏水，請停止操作洗衣機並斷開電源。然後，如果水管漏水，請聯繫當地的三星服務中心，或者

在水龍頭漏水的情況下聯繫管道技術人員。否則，可能導致觸電。

小心

請勿用力拉伸水管。若該水管太短，請使用更長的高壓水管更換該水管。

WW70T4040CW_04221G-00_HKTC.indd 20 2021/3/30 10:05:03

繁體中文 21

安裝

連接無螺紋水龍頭

1. 移除上的。水管（B）接頭（A）

2. 使用十字螺絲刀鬆開接頭上的四顆螺釘。

3. 握住接頭，按箭頭方向轉動將其部件（C）

擰鬆5mm（*）。

4. 將接頭插入水龍頭，然後在提起接頭的同時

擰緊螺釘。

5. 按箭頭方向轉動將其擰緊。部件（C）

WW70T4040CW_04221G-00_HKTC.indd 21 2021/3/30 10:05:03

22 繁體中文

安裝

6. 在拉下水管上的的同時，將水管部件（D）

連接到接頭上。然後，釋放。咔部件（D）

嗒一聲，軟管卡入接頭。

7. 要完成水管的連接，請參見「連接螺紋水龍

頭」部分的2和3。

注意

• 將水管連接到接頭後，向下拉水管以檢查其連接是否正確。

• 使用常用類型的水龍頭。如果水龍頭是方形的或太大，則先移除隔離墊圈，再將接頭插入水龍

頭。

WW70T4040CW_04221G-00_HKTC.indd 22 2021/3/30 10:05:03

繁體中文 23

安裝

適用於帶有額外熱水進水的型號：

1. 將熱水供應軟管的紅色端連接至洗衣機背部

的熱水進水口。

2. 將熱水供應軟管的另一端連接至熱水龍頭。

止水軟管（僅限適用型號）

止水軟管提醒用戶有漏水的危險。其檢測水流，

如果有漏水，中心將變紅。指示燈（A）

注意

止水軟管的末端必須安裝在水龍頭而不是機器上。

WW70T4040CW_04221G-00_HKTC.indd 23 2021/3/30 10:05:04

24 繁體中文

安裝

步驟5 定位排水管

可採用三種方式定位排水管：

水槽邊緣之上

排水管必須放置在距地面60cm至90cm(*)的高

度。要使排水管的噴嘴彎曲，請使用提供的塑

膠軟管導向（A）。使用吊鉤將定位器固定到牆

壁，確保穩定排水。

連接排水道

排水道長度必須為60cm至90cm(*)。建議使用

65cm高的垂直管道。

• 為確保排水軟管保持在適當位置，請使用提

供的塑膠軟管定位器（參見圖片）。

• 為防止在排水過程中虹吸水流，請務必將排

水軟管插入排水管15cm處。

• 為防止排水軟管移動，請將軟管定位器固定

到牆壁上。

垂直排水管要求：

• 最小直徑：5cm

• 最低排水量：每分鐘60L

WW70T4040CW_04221G-00_HKTC.indd 24 2021/3/30 10:05:04

繁體中文 25

安裝

連接至水槽排水道分支

將排水管末端連接在水槽排水管的分支上。為了

防止虹吸現象的發生，請保持您的排水通暢並確

保固定排水管至少距離地面60cm。

(*):60cm

小心

在將排水管連接到水槽排水支管之前，請取下排

水支管上的蓋子。

小心

不要將排水軟管放在積水的地方。水會流回至洗

衣機。

步驟6 啟動洗衣機

將電源線插入電壓相匹配，已正確接地並由保險絲或斷路器保護的牆上插座。然後按下鍵打開洗電源

衣機。

WW70T4040CW_04221G-00_HKTC.indd 25 2021/3/30 10:05:04

繁體中文 27

開始之前

步驟3 使用洗滌網

• 胸圍（可水洗）必須放入洗滌網中。胸圍的金屬部分可能穿透材料並損壞其他衣物。

• 小而輕的物品，例如襪子、手套、絲襪和手絹可能卡在門上。建議裝入洗滌網中洗滌。

• 切勿單獨洗滌未裝衣物的洗衣網。這樣可能導致異常振動，引起洗衣機移位並導致傷害。

步驟4 預洗（如有必要）

如果衣物特別臟可以在選擇的程式中加選預洗選項。洗滌劑手動添加到滾桶時不要使用預洗選項。

步驟5 確定洗衣量

請勿裝入過量衣物。超載可能會導致洗衣機工作不正常。有關衣物類型的負載容量，請參閱第頁。34

注意

洗滌被褥或被罩時，洗滌時間可能延長或者脫水效果可能降低。對於被褥或被罩，推薦的最大脫水程

式速度為800rpm並且衣物容量為2kg或以下。

小心

• 衣物不平衡可能降低脫水性能。

• 確保衣物完全放入洗衣桶中並且沒有被機門卡到。

• 不要砰地一聲關上機門。輕輕關好機門。否則，機門可能無法正常關閉。

步驟6 添加合適的洗劑類型

洗滌劑類型根據織物類型（棉質衣物、合成纖維、精緻衣物、羊毛衣物）、顏色、清洗溫度和沾污度

來定。切記使用專為自動洗衣機配製的「低泡」洗劑。

注意

• 請參照洗劑製造商建議的衣物重量、髒污程度及所在地區的水質硬度。如果您不知道水的硬度，

請諮詢當地的水利局。

• 切勿使用容易會硬化或固化的洗劑。這種洗滌劑可能在洗清程式中殘留下來，而堵塞排水出口。

小心

當您使用程式時，羊毛只使用中性的液體洗劑。如果在程式中使用粉末羊毛/輕柔衣物羊毛/輕柔衣物

洗劑，它可能殘留在衣物上並導致衣物褪色。

WW70T4040CW_04221G-00_HKTC.indd 27 2021/3/30 10:05:04

繁體中文 29

開始之前

洗滌劑抽屜指南

洗衣機提供三分隔間分發器：左分隔間用於主洗，中分隔間用於織物軟化劑，右分隔間用於預洗。

01 預洗分隔間: 添加預洗洗滌劑。

02 主洗分隔間: 添加主洗洗滌劑，水軟化

劑，浸泡洗滌劑，漂白劑，和/或去污劑。

03 柔順劑分隔間: 添加添加劑如織物柔順

劑。請勿超過。最高刻度線（A）

小心

• 洗衣機正在運行時，請勿打開洗滌劑抽屜。

• 請勿使用以下類型的洗滌劑：

• 片劑或膠囊型

• 洗滌球和洗滌網型

• 為防止分隔間堵塞，濃縮的或高度濃縮的洗滌劑（織物柔順劑或洗滌劑）必須用水稀釋才能使

用。

• 当选择延遲完成时，不要将清洁剂直接加入滚桶内。否則，可能會使衣物變色。選擇延遲完成

時，使用洗滌劑盒。

• 請勿使用任何清潔劑清潔洗衣桶。洗衣桶中的化學殘留物會降低洗滌性能。

將清洗劑添加至洗滌劑抽屜

1. 滑動打開洗滌劑抽屜。

2. 按照製造商的指示或推薦添加衣物洗滌劑至

主洗分隔間。使用液體洗滌劑，參見第

31頁。

WW70T4040CW_04221G-00_HKTC.indd 29 2021/3/30 10:05:05

30 繁體中文

開始之前

3. 添加織物柔順劑至  。請勿柔順劑分隔間

超過。最高刻度線（A）

4. 如果需要預洗，按照製造商的指示或推薦添

加預洗洗滌劑至  。預洗分隔間

5. 關閉洗滌劑抽屜。

小心

• 不要將洗衣粉添加至液體洗滌劑盒。

• 濃縮的織物柔順劑，使用前必須用清水進行

稀釋。

• 柔順劑分隔不要將主洗洗滌劑添加至 

間。

WW70T4040CW_04221G-00_HKTC.indd 30 2021/3/30 10:05:06

繁體中文 31

開始之前

使用液體洗滌劑（僅限適用型號）

先在 放入提供的液體洗滌劑盒。主洗分隔間

然後添加液體洗滌劑至盒內以最高刻度線（A）

下。

小心

• 不要超過盒內標記的最高刻度線。

• 如果使用粉末狀洗滌劑請翻開液體洗滌劑

盒。

使用液體洗滌劑時使用粉末狀洗滌劑時

WW70T4040CW_04221G-00_HKTC.indd 31 2021/3/30 10:05:06

32 繁體中文

操作

控制面板

03 04 05 06 07

01 程式選擇旋鈕轉動旋鈕，選擇一種洗滌程式。

02 顯示面板顯示當前程式訊息和估計剩餘時間，或者在發生問題時的訊息代碼。

03 溫度按下此按鈕更改當前程式的水溫。

04 脫水

按下此按鈕更改所選程式的脫水速度。

• 免排水（無指示）：最後的洗清程式暫停，使衣物留在水中。在取出衣

物之前，請先運行排水或脫水程序。

• 免脫水：最後一次排水後，衣物留在桶內，不進行脫水。

• 單脫水 :要運行單脫水程式，請按脫水3秒鐘。當出現程式時間和脫

水速度時，反复按直到選擇所需的脫水速度。然後，按脫水啟動/暫停

啟動程序。脫水時間取決於所選擇的程式。

05 功能按下依次選擇一個功能。功能的可用性取決於程式。

延遲完成

延遲完成幫助您設置當前程式的完成時間。根據您的設置，程式的開始時

間將由機器的內部邏輯來決定。例如，此設置可以為您的洗衣機編程使它

在您通常下班回到家的時候完成洗衣工作。

• 按下選擇預設小時單位。

浸洗按下啟動/停用浸洗技術功能。該功能有助於消除各種頑固污漬。

啟動/暫停按下以啟動或停止操作。

電源按下打開/關閉洗衣機。

有關這些選項的更多信息，請參閱程式功能部分。

*(3秒):按住3秒鐘。

WW70T4040CW_04221G-00_HKTC.indd 32 2021/3/30 10:05:07

繁體中文 33

操作

簡單啟動步驟

1. 按下鍵打開洗衣機。電源

2. 轉動選擇一個程序。程式選擇旋鈕

3. 根據需要，更改程序設置（ 和）。溫度脫水

4. 要添加功能，按下。再次使用該按鈕選擇定制項目。功能

5. 本機提供了兩個便於選擇

延遲完成和

浸洗的按鈕。如果你想使用其中一個功能，按下相應的

按鈕。

6. 按下

啟動/暫停。

在運行過程中更改程式

1. 按下停止運行。啟動/暫停

2. 選擇別的程式。

3. 再次按下啟動新的程序。啟動/暫停

WW70T4040CW_04221G-00_HKTC.indd 33 2021/3/30 10:05:07

34 繁體中文

操作

程式概觀

標準程式

程式說明

最大洗衣量

(kg)

8kg 7kg

棉質 • 用於棉織物、被單和枕套、餐布、內衣、毛巾或襯衫。

洗滌時間和洗清程式的次數根據負載自動調整。最大最大

棉質節能洗

• 對於棉織物、被單和枕套、餐布、內衣、毛巾或襯衫，使用

更少的能源實現最佳性能。

為了節能，實際的洗滌溫度可能低於規定值。

最大最大

人造纖維 • 於用聚酯（迪奧綸、聚酯纖維）、聚醯胺（貝綸、尼龍）或

類似材料製成的織物。 4.0 4.0

過水+脫水對衣物加入織物軟化劑後，採用額外洗清。最大最大•

排水/脫水 • 用於排出滾桶內的水，並運行額外的脫水，有效去除衣物中

的水分。最大最大

筒清潔

• 此程式可去除洗衣桶的髒污和細菌，清潔洗衣桶。

• 在不加入洗滌劑或漂白劑的情況下，每40次洗滌執行一次。

每40次洗滌後自動通知。

• 確保洗衣桶是空的。

• 請勿使用任何清潔劑清潔洗衣桶。

- -

15分快洗

• 適用於輕度髒污，不足2.0kg且需要快洗的衣物。

• 使用少於20g的洗衣劑。使用超過20g的洗衣劑可能會留下

洗衣劑殘留。

• 對於液體洗衣劑，最多使用20毫升液體洗衣劑。

2.0 2.0

日日洗適用於日常洗滌物品，例如內衣和襯衣。 4.0 4.0•

羊毛/輕柔衣物

• 特別適用於機洗羊毛和精細織物，如透明織物、胸罩、內衣

（絲綢）和其他純手工織物。

• 羊毛/輕柔衣物程式採用輕柔的搖擺和浸泡，以防止纖維收

縮/變形。

• 建議使用中性洗滌劑和液體洗滌劑。

2.0 2.0

蒸氣除菌

• 與皮膚直接接觸的棉和亞麻織物，例如內衣。

• 為獲得最佳殺菌效果，請選擇60℃或更高的溫度。

• 蒸氣程式包括過敏護理和消除細菌（消毒）。

4.0 4.0

WW70T4040CW_04221G-00_HKTC.indd 34 2021/3/30 10:05:08

繁體中文 35

操作

程式說明

最大洗衣量

(kg)

8kg 7kg

護色洗淨 • 採用額外洗清和減少的脫水以確保輕柔地洗滌衣物和徹底地

洗清。 4.0 4.0

床單

• 適用於洗滌床罩、床單、被套等。

• 為了達到最佳效果，只洗滌1種類型的床上用品，並確保負

載的重量不超過2.0kg。

2.0 2.0

WW70T4040CW_04221G-00_HKTC.indd 35 2021/3/30 10:05:08

Specyfikacje produktu

Marka:	Samsung
Kategoria:	pralka
Model:	WW70T4040CW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Samsung WW70T4040CW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Samsung

Samsung P1205J Instrukcja

8 Kwietnia 2025

Samsung J1055 Instrukcja

8 Kwietnia 2025

Samsung h 1255 ags titanium Instrukcja

6 Kwietnia 2025

Samsung WD106UHSAWQ Instrukcja

5 Kwietnia 2025

Samsung SW56APP Instrukcja

4 Kwietnia 2025

Samsung WA15F7S4UWA Instrukcja

4 Kwietnia 2025

Samsung WA13R3Q3IW Instrukcja

4 Kwietnia 2025

Samsung WA12K2S1 Instrukcja

4 Kwietnia 2025

Samsung WD10T634DBN Instrukcja

3 Kwietnia 2025

Samsung WW60J3280HS Instrukcja

2 Kwietnia 2025

Instrukcje pralka

Najnowsze instrukcje dla pralka

Electrolux ew 814 f Instrukcja

9 Kwietnia 2025

Whirlpool AWO 6626 Instrukcja

9 Kwietnia 2025

Zanussi ZWF1112W Instrukcja

9 Kwietnia 2025

AEG-Electrolux lavamat 86850 a Instrukcja

9 Kwietnia 2025

Ariston AVL89 Instrukcja

9 Kwietnia 2025

Bauknecht wa 1402 symphony Instrukcja

9 Kwietnia 2025

Electrolux ewf 1230 Instrukcja

9 Kwietnia 2025

Friac wa 1231 e Instrukcja

9 Kwietnia 2025

Zanussi-electrolux fjs 1486 x Instrukcja

9 Kwietnia 2025

Miele WSE383 WCS Instrukcja

9 Kwietnia 2025