Instrukcja obsługi Samsung RS6GA8521B1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samsung RS6GA8521B1 (36 stron) w kategorii LODÓWKI. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/36
Thank you for purchasing the Onkyo CD Receiver.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new CD Receiver.
Please retain this manual for future reference.
CD Receiver
CR-305TX
Instruction Manual
Contents
Before using
Important Safeguards ....................... 2
Precautions ....................................... 3
Features ............................................ 4
Supplied accessories ........................ 5
Before operating this unit ................ 5
Preparation
Audio equipment connections ......... 6
Connecting speaker systems ............ 8
Connecting the AC power cord
(mains lead)...................................... 9
Making antenna connections ......... 10
Control positions and names .......... 12
Remote controller RC-421S........... 13
Operation
Setting the clock............................. 14
Choosing the required source ........ 16
Adjusting the sound ....................... 16
Muting / Listening with the
headphones..................................... 17
Playing a CD .................................. 18
Receiving stations .......................... 22
Using the timer............................... 26
Appendix
Troubleshooting ............................. 32
Specifications ................................. 34
Control guide
Using the remote controller ........... 35
2
1. Read Instructions – All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the op-
erating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should
be followed.
5. Cleaning – Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned only as recommended
by the manufacturer.
6. Attachments – Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
7. Water and Moisture – Do not use the appliance near water –for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories – Do not place the appliance on an unstable cart,
stand, tripod, bracket, or table. The appliance may fall, causing
serious injury to a child or adult, and serious damage to the ap-
pliance. Use only with a cart, stand, tripod, bracket, or table rec-
ommended by the manufacturer, or sold with the appliance. Any
mounting of the appliance
should follow the
manufacturer’s instructions, and
should use a mounting acces-
sory recommended by the
manufacturer.
9. An appliance and cart combina-
tion should be moved with care.
Quick stops, excessive force,
and uneven surfaces may cause
the appliance and cart combina-
tion to overturn.
10. Ventilation – Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the appliance and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the appliance on a bed, sofa, rug, or other similar sur-
face. The appliance should not be placed in a built-in installa-
tion such as a bookcase or rack unless proper ventilation is pro-
vided. There should be free space of at least 20 cm (8 in.) and an
opening behind the appliance.
11. Power Sources – The appliance should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your appliance dealer or local power company.
12. Grounding or Polarization – The appliance may be equipped
with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
13. Power-Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit
from the appliance.
14. Outdoor Antenna Grounding – If an outside antenna or cable
system is connected to the appliance, be sure the antenna or cable
system is grounded so as to provide some protection against volt-
age surges and built-up static charges. Article 810 of the Na-
tional Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna-discharge unit, size
of grounding conductors, location of antenna-discharge unit, con-
nection to grounding electrodes, and requirements for the ground-
ing electrode. See Figure 1.
15. Lightning – For added protection for the appliance during a light-
ning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
appliance due to lightning and power-line surges.
16. Power Lines – An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or cir-
cuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or cir-
cuits as contact with them might be fatal.
17. Overloading – Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
18. Object and Liquid Entry – Never push objects of any kind into
the appliance through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the appliance.
19. Servicing – Do not attempt to service the appliance yourself as
opening or removing covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to qualified service per-
sonnel.
20. Damage Requiring Service – Unplug the appliance form the
wall outlet and refer servicing to qualified service personnel un-
der the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the ap-
pliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the appliance to its normal operation,
E. If the appliance has been dropped or damaged in any way,
and
F. When the appliance exhibits a distinct change in performance
– this indicates a need for service.
Important Safeguards
PORTABLE CART WARNING
S3125A
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“ ” ’dangerous voltage within the product s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
3
21. Replacement Parts – When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the origi-
nal part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
22. Safety Check – Upon completion of any service or repairs to
the appliance, ask the service technician to perform safety checks
to determine that the appliance is in proper operation condition.
23. Wall or Ceiling Mounting – The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
24. Heat – The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (in-
cluding amplifiers) that produce heat.
25. Liquid Hazards – The appliance shall not be exposed to drip-
ping or splashing and no objects filled with liquids, such as vases
shall be placed on the appliance.
1. Recording Copyright
Recording of copyrighted material for other than personal use is il-
legal without permission of the copyright holder.
2. AC Fuse
The fuse is located inside the chassis and is not user-serviceable. If
power does not come on, contact your Onkyo authorized service
station.
3. Care
From time to time you should wipe the front and rear panels and the
cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a
weak solution of mild detergent and water, wring it out dry, and
wipe off the dirt. Following this, dry immediately with a clean cloth.
Do not use rough material, thinners, alcohol or other chemical sol-
vents or cloths since these could damage the finish or remove the
panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to coun-
try or region. Be sure that the power supply voltage of the area where
this unit will be used meets the required voltage (e.g., AC 120 V, 60
Hz) written on the rear panel.
Setting the STANDBY/ON button to standby does not shut off the
power completely. So the power cord should be removed from the
AC outlet when the unit is not used for a prolonged time.
5. Do not touch this unit with wet hands
Do not handle this unit or power cord when your hands are wet or
damp. If water or any other liquid enters the case, take this unit to an
authorized service center for inspection.
6. Location of this unit
Place this unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all sides of this
unit especially when it is placed in an audio rack. If ventilation is
blocked, this unit may overheat and malfunction.
Do not expose this unit to direct sunlight or heating units as this
unit's internal temperature may rise and shorten the life of the pickup.
Avoid damp and dusty places and places directly affected by vibra-
tions from the speakers. In particular, avoid placing the unit on or
above one of the speakers.
Be sure this unit is placed in a horizontal position. Never place it on
its side or on a slanted surface as it may malfunction.
Do not place near tuners or TV sets.
If placed next to a TV or tuner, it may cause reception interference
resulting in some noise in the TV or tuner output.
7. Points to remember
If this unit is brought from a cold environment to a warm one or is in
a cold room that is quickly heated, condensation may form on the
pickup, preventing proper operation. In this case, remove the disc and
leave the power ON for about one hour to remove the condensation.
When transporting this unit, be careful not to bump it.
FIGURE 1:
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELEC-
TRICAL CODE, ANSI/NFPA 70
Precautions
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCT ORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER S ERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NAT IONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
S2898A
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
GERMERING, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
I. MORI
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
This unit contains a semiconductor laser system and is classified as
a “CLASS 1 LASER PRODUCT.” So, to use this model properly,
read this Instruction Manual carefully. In case of any trouble, please
contact the store where you purchased the unit. To prevent being
exposed to the laser beam, do not try to open the enclosure.
DANGER:
INVISIBLE LASER RADIATION WHEN OPEN AND INTER-
LOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE
TO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
For European model
This label on the right side of the panel states that:
1. This unit is a CLASS 1 LASER PRODUCT and employs a laser
inside the cabinet.
2. To prevent the laser from being exposed, do not remove the cover.
Refer servicing to qualified personnel.
“CLASS 1 LAS ER
PRODUCT ”
Specyfikacje produktu
| Marka: | Samsung |
| Kategoria: | LODÓWKI |
| Model: | RS6GA8521B1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Samsung RS6GA8521B1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje LODÓWKI Samsung
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024
3 Lipca 2024
Instrukcje LODÓWKI
- LODÓWKI Bauknecht
- LODÓWKI Electrolux
- LODÓWKI AEG
- LODÓWKI Beko
- LODÓWKI Teka
- LODÓWKI LG
- LODÓWKI Smeg
- LODÓWKI Gram
- LODÓWKI Amica
- LODÓWKI Gorenje
- LODÓWKI Etna
- LODÓWKI Sharp
- LODÓWKI Russell Hobbs
- LODÓWKI Dometic
- LODÓWKI Bosch
- LODÓWKI Candy
- LODÓWKI Whirlpool
- LODÓWKI Miele
- LODÓWKI Hisense
- LODÓWKI Baumatic
- LODÓWKI Hoover
- LODÓWKI Brandt
- LODÓWKI Siemens
- LODÓWKI Danby
- LODÓWKI Haier
- LODÓWKI Blomberg
- LODÓWKI Indesit
- LODÓWKI Matsui
- LODÓWKI Viking
- LODÓWKI Hotpoint
- LODÓWKI V-Zug
- LODÓWKI Trisa
- LODÓWKI PKM
- LODÓWKI Bomann
- LODÓWKI Philco
- LODÓWKI Neff
- LODÓWKI Zanussi
- LODÓWKI Klarstein
- LODÓWKI Exquisit
- LODÓWKI Hanseatic
- LODÓWKI Atag
- LODÓWKI Rosieres
- LODÓWKI Inventum
- LODÓWKI Insignia
- LODÓWKI Pelgrim
- LODÓWKI Kernau
- LODÓWKI Kelvinator
- LODÓWKI Avanti
- LODÓWKI Scandomestic
- LODÓWKI Ignis
- LODÓWKI Constructa
- LODÓWKI Swan
- LODÓWKI Zanker
- LODÓWKI Alno
- LODÓWKI Ariston
- LODÓWKI Arthur Martin
- LODÓWKI Tomado
- LODÓWKI Vestel
- LODÓWKI Logik
- LODÓWKI Currys Essentials
- LODÓWKI Accucold
- LODÓWKI Juno
- LODÓWKI Servis
- LODÓWKI Marijnen
- LODÓWKI Igloo
- LODÓWKI Premium
- LODÓWKI White Knight
- LODÓWKI Everglades
- LODÓWKI Leonard
- LODÓWKI Godrej
- LODÓWKI Fust
- LODÓWKI Juno-electrolux
- LODÓWKI Seppelfricke
Najnowsze instrukcje dla LODÓWKI
15 Września 2024
6 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024