Instrukcja obsługi Samsung NE63A6751SS

Samsung piekarnik NE63A6751SS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samsung NE63A6751SS (16 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Electric Range
Installation manual
Anti-tip device
WARNING
To reduce the risk of tipping the appliance, the appliance must be secured by properly installed anti-tip devices packed with the appliance.
A. A child or adult can tip the range and be killed.
B. Install the anti-tip device to the structure and/or the range at rear right (or rear left) of the range bottom.
C. Engage the range to the anti-tip device by leveling leg at rear right (or rear left) of the range bottom.
D. Re-engage the anti-tip device if the range is moved.
E. See installation instructions for details.
F. Failure to do so can result in death or serious burns to children or adults.
About this manual
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY.
Important note to the installer
• Read all instructions contained in these installation instructions before installing the range.
• Remove all packing materials from the oven compartments before connecting the electrical supply to the range.
• Observe all governing codes and ordinances.
• Save for the local electrical inspector’s use.
• Be sure to leave these instructions with the consumer.
Important note to the consumer
Keep these instructions for the local electrical inspector’s use.
• As when using any appliance generating heat, there are certain safety precautions you should follow.
• Be sure your range is installed and grounded properly by a qualied installer or service technician.
• For the range to ventilate properly, make sure the range’s vents are not blocked or covered, and that there is enough clearance at the top,
back, sides, and underneath the range. The vents allow the necessary exhaust for the range to operate properly with correct combustion
and get proper cooking results.
• Make sure the wall coverings around the range can withstand the heat generated by the range.
• To eliminate the need to reach over the surface elements, avoid having cabinet storage space above the cooktop.
• The range should not be placed on an elevated base.
For your safety
WARNING
• If the information in this manual is not followed exactly, a re or electrical shock may result causing property damage, personal injury, or
death.
• Before beginning the installation, switch the power off at the service panel and lock the service disconnecting switch to prevent power
from being switched on accidentally. When the service disconnecting switch cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
• This appliance must be properly grounded.
DG68-01359B-01
1 - English
Preparing to install the range
Prepare tools & Parts
The tools you will need
Drill Adjustable
Wrench
Pliers 1⁄4" Nut Driver Phillips
Screwdriver
Flat
Screwdriver
Pencil Level
What’s included with your range Additional materials you may need
Anti-tip Bracket
Template
Anti-Tip Bracket Screws
(short:2 ea,
long:2 ea)
4-Wire Cord or
3-Wire Cord
(UL Approved 40
or 50 AMP)
Strain Relief
(For Conduit Installation
Only)
Checking the installation site
Clearances and dimensions
To install the range, refer to the followinggure.
CAUTION
This range has been designed to comply with the maximum allowable wood cabinet temperatures of 194 °F. Make sure the wall covering,
countertops, and cabinets around the range can withstand the heat (up to 194 °F) generated by the range. If not, discoloration, delamination, or
melting may occur.
361/ 8 in
(918.2 mm) Min.
367/ 8 in
(936.8 mm) Max.
465
/ 16 in
(1176.9 mm) Min.
47 1
/ 16 in
(1195.5 mm) Max.
103/ 16 in
(258.7 mm)
2915/16 in
(761.0 mm)
26
7
/
16
in
(671.7 mm)
28
11
/
16
in
(728.6 mm)
With handle
49
1
/
4
in (1250.3 mm)
Door fully open
A
B
36
1/8
"-363⁄ "4
29
15⁄ "16
293⁄ "4
2811⁄ "16
267⁄ "16
491⁄ "4
25"
24"
6"
357⁄ "8
24"
3"
3"
A. Cabinet opening min 30" (76.2 cm)
B. Acceptable electrical outlet area
IMPORTANT: If your cabinets are over 363⁄4" high, you must install this
range on a hard, heat resistant support that raises the surface of the
range so that it is about even with the countertop.
CAUTION
You must use the rear ller kit to install the range in a freestanding
cutout cabinet. For more information, see “Optional rear ller kit” as
shown below.
NOTE
If you install the product in a kitchen island, you must maintain
minimum 21/2" from cutout to back edge of the countertop and
minimum 3" from cutout to side edges of the countertop.
2 - English
Minimum dimensions
B: 15"
30"
A: 30"
IMPORTANT: To eliminate the risk of burns or re caused by reaching over heated surface units,
avoid having cabinet storage space located above the surface units. If you have cabinet storage
space over the heating elements, you can reduce the risk by installing a range hood that projects
horizontally a minimum of 5 inches beyond the bottom of the cabinets.
A. A minimum of 30" is required between the top of the cooking surface and the bottom of an
unprotected wood or metal cabinet; a minimum of 24" is required if the bottom of the wood
or metal cabinet is protected by not less than 1⁄4" of ame retardant millboard covered with
not less than no.28 MSG of sheet steel, 0.015" of stainless steel, 0.024" of aluminum, or
0.020" of copper.
B. A minimum of 15" is required between the countertop and the adjacent cabinet bottom.
CAUTION
Vapors may come out from the vent. It is normal, but be careful as it may be hot. Depending on
the material of your wall, hot vapors may leave stains on it.
To avoid breakage
CAUTION
Do NOT lift or handle the unit by the cooktop glass or door handle.
Fig. 1
C1
C2
C3
C4
1. The counter top around the cut-out should be at and leveled.
2. Before installing the unit, measure the heights of the two
cabinet sides ( ), front and back (See C1-C4 Fig. 1) from the oor to
the top of the counter.
3. Level the range using the four leveling legs so that the height
from the oor to the underside of the cooktop glass frame is
greater than the tallest cabinet measurement by at least 1⁄16".
4. Slide the unit into the cabinet (DO NOT PUSH THE UNIT HARD).
Make sure the center of the unit aligns with the center of the
cabinet cut-out.

Specyfikacje produktu

Marka: Samsung
Kategoria: piekarnik
Model: NE63A6751SS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Samsung NE63A6751SS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piekarnik Samsung

Samsung

Samsung NV7B44502DS Instrukcja

8 Października 2024
Samsung

Samsung NV7B4450VDK Instrukcja

8 Października 2024
Samsung

Samsung NV7B44502DB Instrukcja

8 Października 2024
Samsung

Samsung NV7B7997ADK Instrukcja

8 Października 2024
Samsung

Samsung NSI6DB950012 Instrukcja

8 Października 2024
Samsung

Samsung NSI6DB990012 Instrukcja

8 Października 2024
Samsung

Samsung NSI6DG9500SR Instrukcja

8 Października 2024
Samsung

Samsung NSI6DG9900SR Instrukcja

8 Października 2024
Samsung

Samsung NSE6DG8100MT Instrukcja

8 Października 2024
Samsung

Samsung NSI6DB950012AA Instrukcja

7 Października 2024

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik

Wolf

Wolf M Series Instrukcja

15 Października 2024
Princess

Princess 112741 Instrukcja

15 Października 2024
Boretti

Boretti VFPNR 1202 IX Instrukcja

15 Października 2024
Ilve

Ilve MDC-120 Instrukcja

15 Października 2024
Frigidaire

Frigidaire FCWD2727AW Instrukcja

15 Października 2024
Fisher & Paykel

Fisher & Paykel CG302DLPGB4 Instrukcja

15 Października 2024
AEG

AEG IKK74545FB Instrukcja

15 Października 2024
Ilve

Ilve HCPT75D Instrukcja

15 Października 2024
Zanker

Zanker KOU65902XK Instrukcja

15 Października 2024
Hoover

Hoover PHC3B25CXHH64DCT Instrukcja

15 Października 2024