Instrukcja obsługi Samsung J1254S

Samsung pralka J1254S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samsung J1254S (112 stron) w kategorii pralka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/112

Washing Machine

User manual

Q125** / Q125* / J125** / J125* / B125** / B125*

SSEC SEC

Q1256S_DC68-03506Q_EN.indd 1 2015/5/14 14:15:13

2 English

Contents

Safety information 3

What you need to know about the safety instructions 3

Important safety symbols 3

Important safety precautions 4

Installation 13

What’s included 13

Installation requirements 15

Step-by-step installation 17

Before you start 23

Initial settings 23

Laundry guidelines 24

Detergent drawer guidelines 26

Operations 29

Control panel 29

Simple steps to start 31

Course overview 32

Settings 35

Maintenance 36

Eco drum clean 36

Smart check 37

Emergency drain 38

Cleaning 39

Recovery from freezing 42

Care against an extended time of disuse 42

Troubleshooting 43

Checkpoints 43

Information codes 48

Specications 51

Fabric care chart 51

Protecting the environment 52

Specication sheet 53

Q1256S_DC68-03506Q_EN.indd 2 2015/5/14 14:15:13

English 3

Safety information

Congratulations on your new Samsung washing machine. This manual contains important

information on the installation, use and care of your appliance. Please take some time to read

this manual to take full advantage of your washing machine’s many benets and features.

What you need to know about the safety instructions

Please read this manual thoroughly to ensure that you know how to safely and efciently

operate the extensive features and functions of your new appliance. Please store the manual

in a safe location close to the appliance for future reference. Use this appliance only for its

intended purpose as described in this instruction manual.

Warnings and Important Safety Instructions in this manual do not cover all possible

conditions and situations that may occur. It is your responsibility to use common sense,

caution and care when installing, maintaining and operating your washing machine.

Because the following operating instructions cover various models, the characteristics of your

washing machine may differ slightly from those described in this manual and not all warning

signs may be applicable. If you have any questions or concerns, contact your nearest service

centre or nd help and information online at www.samsung.com.

Important safety symbols

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury, death and/or property

damage.

CAUTION

Hazards or unsafe practices that may result in personal injury and/or property damage.

NOTE

Indicates that a risk of personal injury or material damage exists.

Q1256S_DC68-03506Q_EN.indd 3 2015/5/14 14:15:13

4 English

Safety information

These warning signs are here to prevent injury to yourself and others.

Please follow them explicitly.

After reading this manual, store it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment that uses electricity and moving parts, potential hazards exist. To

safely operate this appliance, familiarize yourself with its operation and exercise care when

using it.

Important safety precautions

WARNING

To reduce the risk of re, electric shock, or injury to persons when

using your appliance, follow basic precautions, including the following:

Do not let children (or pets) play in or on your washing machine.

The washing machine door does not open easily from the inside and

children may be seriously injured if trapped inside.

This appliance is not to be used by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their

safety.

Children should be supervised to ensure that they do not play with the

appliance.

For use in Europe: This appliance can be used by children aged from 8

years and above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a

safe way and understand the hazards involved. Children shall not play

with the appliance. Cleaning and user maintenance shall not be made

by children without supervision.

Q1256S_DC68-03506Q_EN.indd 4 2015/5/14 14:15:13

English 5

Safety information

If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualied persons in order to avoid a

hazard.

This appliance should be positioned so that the power plug, the water

supply taps, and the drain pipes are accessible.

For appliances with ventilation openings in the base, that a carpet must

not obstruct the openings.

The new hose-sets supplied with the appliance are to be used and that

old hose-sets should not be reused.

CAUTION

In order to avoid a hazard due to inadvertent resetting of the thermal

cut-out, this appliance must not be supplied through an external

switching device, such as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

Critical installation warnings

WARNING

The installation of this appliance must be performed by a qualied technician or service

company.

• Failure to do so may result in electric shock, re, an explosion, problems with the product,

or injury.

The appliance is heavy, therefore take care when lifting it.

Plug the power cord into an AC 220 - 240 V / 50 Hz wall socket or higher and use the socket

for this appliance only. Never use an extension cord.

• Sharing a wall socket with other appliances using a power strip or extending the power

cord may result in electric shock or re.

• Ensure that the power voltage, frequency, and current are the same as those of the

product specications. Failure to do so may result in electric shock or re. Plug the power

plug into the wall socket rmly.

Q1256S_DC68-03506Q_EN.indd 5 2015/5/14 14:15:13

6 English

Safety information

Remove all foreign substances such as dust or water from the power plug terminals and

contact points using a dry cloth on a regular basis.

• Unplug the power plug and clean it with a dry cloth.

• Failure to do so may result in electric shock or re.

• Plug the power plug into the wall socket so that the cord is running towards the oor.

If you plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or re.

Keep all packaging materials out of the reach of children as these may be dangerous.

• If a child places a bag over its head, it may suffocate.

When the appliance, power plug or power cord is damaged, contact your nearest service

centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

• This may result in electric shock, re, an explosion, or problems with the product.

• Never plug the power cord into a socket that is not grounded correctly and make sure

that it is in accordance with local and national regulations.

Do not install this appliance near a heater or any inammable material.

Do not install this appliance in a humid, oily or dusty location, or in a location exposed to

direct sunlight or water (rain drops).

Do not install this appliance in a location exposed to low temperatures.

• Frost may cause the tubes to burst.

Do not install this appliance in a location where gas may leak.

• This may result in electric shock or re.

Do not use an electric transformer.

• This may result in electric shock or re.

Do not use a damaged power plug, damaged power cord, or loose wall socket.

• This may result in electric shock or re.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord,

insert the power cord between objects, or push the power cord into the space behind the

appliance.

• This may result in electric shock or re.

Do not pull the power cord when unplugging the power plug.

• Unplug the power plug by holding the plug.

Q1256S_DC68-03506Q_EN.indd 6 2015/5/14 14:15:13

English 7

Safety information

• Failure to do so may result in electric shock or re.

Installation cautions

CAUTION

This appliance should be positioned in such a way that the power plug is easily accessible.

• Failure to do so may result in electric shock or re due to electric leakage.

Install your appliance on a solid, level oor that can support its weight.

• Failure to do so may result in abnormal vibrations, movement, noise, or problems with

the product.

Critical usage warnings

WARNING

If the appliance is ooded, turn off the water & power supplies immediately and contact your

nearest service centre.

• Do not touch the power plug with wet hands.

• Failure to do so may result in electric shock.

If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug

immediately and contact your nearest service centre.

• Failure to do so may result in electric shock or re.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without

touching the power plug. Do not touch the appliance or power cord.

• Do not use a ventilating fan.

• A spark may result in an explosion or re.

Do not let children play in or on the washing machine. In addition, when disposing of the

appliance, remove the washing machine door lever.

• If trapped inside the product, children may suffocate to death.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the

washing machine before using it.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other inammable or explosive substances.

• This may result in electric shock, re, or an explosion.

Q1256S_DC68-03506Q_EN.indd 7 2015/5/14 14:15:13

8 English

Safety information

Do not open the washing machine door by force while it is operating (high-temperature

washing/drying/spinning).

• Water owing out of the washing machine may result in burns or cause the oor to be

slippery. This may result in injury.

• Opening the door by force may result in damage to the product or injury.

Do not insert your hand under the washing machine while an operation is in progress.

• This may result in injury.

Do not touch the power plug with wet hands.

• This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

• Plugging the power plug into the wall socket again may cause a spark and result in

electric shock or re.

Do not let children or the inrm use this washing machine without proper supervision. Do

not let children climb in or onto the appliance.

• This may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washing machine while it is operating.

• This may result in injury.

Do not unplug the appliance by pulling the power cord. Always grip the plug rmly and pull

it straight out of the outlet.

• Damage to the power cord may cause a short-circuit, re and/or electric shock.

Do not attempt to repair, disassemble, or modify the appliance yourself.

• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.

• When the appliance needs to be repaired or reinstalled, contact your nearest service

centre.

• Failure to do so may result in electric shock, re, problems with the product, or injury.

If the water supply hose comes loose from the water tap and oods the appliance, unplug the

power plug.

• Failure to do so may result in electric shock or re.

Unplug the power plug when the appliance is not being used for long periods of time or

during a thunder or lightning storm.

• Failure to do so may result in electric shock or re.

If any foreign substance enters into the appliance, unplug the power plug and contact you

nearest Samsung Customer Service.

• This may result in electric shock or re.

Q1256S_DC68-03506Q_EN.indd 8 2015/5/14 14:15:13

English 9

Safety information

Usage cautions

CAUTION

When the washing machine is contaminated by a foreign substance such as detergent, dirt,

food waste, etc., unplug the power plug and clean the washing machine using a damp, soft

cloth.

• Failure to do so may result in discolouration, deformation, damage, or rust.

The front glass may be broken by a strong impact. Take care when using the washing

machine.

• If the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the water tap

slowly.

Open the water tap slowly after a long period of non-use.

• The air pressure in the water supply hose or the water pipe may damage a product part

or result in a water leak.

If a draining error occurs during an operation, check if there is a draining problem.

• If the washing machine is used when it is ooded because of a draining problem, it may

result in electric shock or re.

Insert the laundry into the washing machine completely so that the laundry does not get

caught in the door.

• If laundry gets caught in the door, it may result in damage to the laundry or the washing

machine, or result in a water leak.

Turn the water supply off when the washing machine is not being used.

Ensure that the screws on the water supply hose connector are properly tightened.

• Failure to do so may result in property damage or injury.

Ensure that the rubber seal and front door glass are not contaminated by a foreign substance

(e.g. waste, thread, hair, etc.).

• If a foreign substance is caught in the door or the door is not completely closed, it may

cause a water leak.

Open the water tap and check if the water supply hose connector is rmly tightened and that

there is no water leak before using the product.

• If the screws on the water supply hose connector are loose, it may result in a water leak.

The product you have purchased is designed for domestic use only.

Q1256S_DC68-03506Q_EN.indd 9 2015/5/14 14:15:14

10 English

Safety information

Using the product for business purposes qualies as a product misuse. In this case, the

product will not be covered by the standard warranty provided by Samsung and no

responsibility can be attributed to Samsung for malfunctions or damages resulting from such

misuse.

Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted

cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

• This may result in electric shock, re, problems with the product, or injury.

Do not spray volatile material such as insecticide onto the surface of the appliance.

• As well as being harmful to humans, this may result in electric shock, re or problems

with the product.

Do not place objects that generate electromagnetic elds near the washing machine.

• This may result in injury due to a malfunction.

Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water.

• This may result in burns or injury.

Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a

special cycle for washing these items.

(*): Woollen bedding, rain covers, shing vests, ski pants, sleeping bags, diaper covers, sweat

suits, and bicycle, motor cycle and car covers, etc.

• Do not wash thick or hard mats even if the washing machine mark is on the care label.

This may result in injury or damage to the washing machine, walls, oor, or clothing due

to abnormal vibrations.

• Do not wash throw rugs or doormats with rubber backing. The rubber backing may come

off and stick to inside the drum, and this may result in malfunction such as a drainage

error.

Do not operate the washing machine when the detergent drawer is removed.

• This may result in electric shock or injury due to a water leak.

Do not touch the insides of the drum during or just after drying as it is hot.

• This may result in burns.

Do not insert your hand into the detergent drawer.

• This may result in injury as your hand may be caught by the detergent input device.

• The liquid detergent guide (applicable models only) is not used for powder detergent.

Remove the guide when using powder detergent.

Do not place any objects (such as shoes, food waste, animals) other than laundry into the

washing machine.

• This may result in damage to the washing machine, or injury and death in the case of

pets due to the abnormal vibrations.

Q1256S_DC68-03506Q_EN.indd 10 2015/5/14 14:15:14

English 11

Safety information

Do not press the buttons using sharp objects such as pins, knifes, ngernails, etc.

• This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops

or massage clinics.

• This may cause the rubber seal to become deformed and result in a water leak.

Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long

periods of time.

• This may cause the drum to rust.

• If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to

the surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry

contaminated by dry cleaning detergent.

• This may result in spontaneous combustion or ignition due to the heat from the oxidation

of the oil.

Do not use water from water cooling/heating devices.

• This may result in problems with the washing machine.

Do not use natural hand-washing soap for the washing machine.

• If it hardens and accumulates inside the washing machine, it may result in problems with

the product, discolouration, rust, or bad odours.

Place socks and brassieres in a washing net and wash them with the other laundry.

Do not wash large laundry items such as bedding in the washing net.

• Failure to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

• If it accumulates inside the washing machine, it may result in a water leak.

Make sure that the pockets of all the clothing items to be washed are empty.

• Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive

damage to the appliance.

Do not wash clothing with large buckles, buttons or other heavy metal objects.

Sort the laundry by color on the basis of its colorfastness and select the recommended cycle,

water temperature and additional functions.

• This may result in discoloration or fabric damage.

Take care that children’s ngers are not caught in the door when you close it.

• Failure to do so may result in injury.

Q1256S_DC68-03506Q_EN.indd 11 2015/5/14 14:15:14

12 English

Safety information

Critical cleaning warnings

WARNING

Do not clean the appliance by spraying water directly onto it.

Do not use the a strong acidic cleaning agent.

Do not use benzene, thinner or alcohol to clean the appliance.

• This may result in discolouration, deformation, damage, electric shock or re.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

• Failure to do so may result in electric shock or re.

Q1256S_DC68-03506Q_EN.indd 12 2015/5/14 14:15:14

English 13

Installation

Follow these instructions carefully to ensure proper installation of the washing machine and

to prevent accidents when doing laundry.

What’s included

Make sure all the parts are included in the product package. If you have a problem with

the washing machine or the parts, contact a local Samsung customer centre or the retailer.

01 Release lever Detergent drawer Control panel02 03

04 05 06 Door Drum Lint lter

07 Emergency drain tube Filter cover08 09 Worktop

10 Power plug Drain hose Levelling feet11 12

Q1256S_DC68-03506Q_EN.indd 13 2015/5/14 14:15:14

14 English

Installation

Spanner Bolt caps Hose guide

Cold water hose Hot water hose Liquid detergent container

Cap xer

NOTE

• Bolt caps : The provided number (3 to 6) of bolt caps depends on the model.

• Hot water hose: Applicable models only.

• Liquid detergent container: Applicable models only.

Q1256S_DC68-03506Q_EN.indd 14 2015/5/14 14:15:14

English 15

Installation

Installation requirements

Electrical supply and grounding

• AC 220-240 V / 50 Hz fuse or circuit

breaker is required

• Use an individual branch circuit specic

to the washing machine

To ensure proper grounding, the washing

machine comes with a power cord featuring

a three-prong grounding plug for use in a

properly installed and grounded outlet.

Check with a qualied electrician or

serviceperson if you are not sure about the

grounding.

Do not modify the provided plug. If it does

not t the outlet, call a qualied electrician

to install a proper outlet.

WARNING

• Do NOT use an extension cord.

• Use only the power cord that comes

with the washing machine.

• Do NOT connect the ground wire to

plastic plumbing, gas lines, or hot water

pipes.

• Improperly connected grounding

conductors may cause electric shock.

Water supply

A proper water pressure for this washing

machine is between 50 kPa and 800 kPa.

Water pressure less than 50 kPa may cause

the water valve not to close completely. Or,

it may take longer to ll the drum, causing

the washing machine to turn off. Water taps

must be within 120 cm from the rear of the

washing machine so that the provided inlet

hoses reach the washing machine.

To reduce the risk of leaks:

• Make sure water taps are easily

accessible.

• Turn off the taps when the washing

machine is not in use.

• Check for any leaks at the water inlet

hose ttings on a regular basis.

CAUTION

Before using the washing machine for the

rst time, check all connections at the water

valve and taps for any leaks.

Drain

Samsung recommends a standpipe in

height of 60~90 cm. The drain hose must

be connected through the hose clip to the

standpipe, and the standpipe must fully

cover the drain hose.

Q1256S_DC68-03506Q_EN.indd 15 2015/5/14 14:15:15

16 English

Installation

Flooring

For best performance, the washing

machine must be installed on a solid oor.

Wood oors may need to be reinforced

to minimize vibration and/or unbalanced

loads. Carpeting and soft tile surfaces are

not a good resistance to vibrations and may

cause the washing machine to move slightly

during the spin cycle.

CAUTION

Do NOT install the washing machine on a

platform or a poorly supported structure.

Water temperature

Do not install the washing machine in areas

where water may freeze as the washing

machine always retains some water in its

water valves, pumps, and/or hoses. Frozen

water left in the connection parts may

cause damage to belts, the pump, and other

components of the washing machine.

Alcove or closet installation

Minimum clearance for stable operation:

Sides Rear25 mm 50 mm

Top 25 mm Front 550 mm

If both the washing machine and a dryer

are installed in the same location, the front

of the alcove or closet must have at least

a 550 mm unobstructed air opening. Your

washing machine alone does not require a

specic air opening.

Q1256S_DC68-03506Q_EN.indd 16 2015/5/14 14:15:15

English 17

Installation

Step-by-step installation

STEP 1 Select a location

Location requirements:

• Solid, level surface without carpeting or ooring that may obstruct ventilation

• Away from direct sunlight

• Adequate room for ventilation and wiring

• The ambient temperature is always higher than the freezing point (0 ˚C)

• Away from a heat source

STEP 2 Remove the shipping bolts

Unpack the product package and remove all

shipping bolts.

1. Loosen all shipping bolts on the rear of

the machine using the supplied spanner.

2. Fill the holes with the supplied plastic

bolt caps.

Keep the shipping bolts for future use.

WARNING

Packaging materials can be dangerous to children. Dispose all packaging material (plastic

bags, polystyrene, etc.) out of children’s reach.

Q1256S_DC68-03506Q_EN.indd 17 2015/5/14 14:15:15

18 English

Installation

STEP 3 Adjust the levelling feet

1. Gently slide the washing machine into

position. Excessive force may damage

the levelling feet.

2. Level the washing machine by manually

adjusting the levelling feet.

3. When levelling is complete, tighten the

nuts using the spanner.

STEP 4 Connect the water hose

The provided hose adaptor may differ with the model. This step guides you through

connecting the connector-type adaptor. If you are provided with the screw-type adaptor, go

to 7.

Connect the water hose to the water tap.

1. Remove the from the adaptor (A) water

hose (B).

Q1256S_DC68-03506Q_EN.indd 18 2015/5/14 14:15:15

English 19

Installation

2. Use a Philips screwdriver to loosen four

screws on the adaptor.



3. Hold the adaptor and turn in the part (C)

arrow direction to loosen it by 5 mm (*).

4. Insert the adaptor into the water tap,

and tighten the screws while lifting up

the adaptor.

5. Turn part (C) in the arrow direction to

tighten it.

6. While holding down , connect the part (E)

water hose to the adaptor. Then, release

part (E). The hose ts into the adaptor

with a clicking sound.

Q1256S_DC68-03506Q_EN.indd 19 2015/5/14 14:15:16

20 English

Installation

7. If you are using a screw type of water

tap, use the provided screw-type

adaptor to connect to the water tap as

shown.

8. Connect the other end of the water

hose to the inlet valve on the back of

the washing machine. Turn the hose

clockwise to tighten.

9. Open the water tap and check if there

are any leaks around the connection

areas. If there are water leaks, repeat the

steps above.

WARNING

Stop using the washing machine if there is a water leak, and contact a local Samsung service

centre. Otherwise, this may cause electric shock.

CAUTION

Do not stretch the water hose by force. If the hose is too short, replace the hose with a

longer, high-pressure hose.

Q1256S_DC68-03506Q_EN.indd 20 2015/5/14 14:15:17

English 21

Installation

NOTE

• After connecting the water hose to the adaptor, check if it is connected properly by

pulling the water hose downwards.

• Use a popular type of water taps. If the tap is square-shaped or too big, remove the

spacer ring before inserting the tap into the adaptor.

For models with an additional hot water

inlet:

1. Connect the red end of the hot water

hose to the hot water inlet on the back

of the machine.

2. Connect the other end of the hot water

hose to the hot water tap.

Aqua hose (applicable models only)

The aqua hose alerts users of a risk of water

leaks. It senses the water ow and turns red

on the centre in case of a leak.indicator (A)

Q1256S_DC68-03506Q_EN.indd 21 2015/5/14 14:15:17

22 English

Installation

STEP 5 Position the drain hose

The drain hose can be positioned in three ways:

A

Over the edge of a wash basin

The drain hose must be placed at a height

of between 60 cm and 90 cm (*) from the

oor. To keep the spout of the drain hose

bent, use the supplied plastic hose guide (A).

Secure the guide to the wall using a hook to

ensure stable drainage.

ln a sink drain pipe

The drain pipe must be above the sink

siphon so that the end of the hose is at least

60 cm above the oor.



ln a drain pipe

The drain pipe should be between 60 cm

and 90 cm high . It is advisable to use (*)

a 65 cm high vertical pipe. Make sure the

drain hose is connected to the stand pipe at

a slant.

Drain standpipe requirements:

• Minimum diameter of 5 cm

• Minimum carry-away capacity of 60

litres per minute

STEP 6 Turn on the washing machine

Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved electrical

outlet protected by a fuse or circuit breaker. Then, press to turn on the washing Power

machine.Before you start

Q1256S_DC68-03506Q_EN.indd 22 2015/5/14 14:15:17

English 23

Before you start

Initial settings

Run Calibration (recommended)

Calibration ensures accurate weight

detection by the washing machine. Make

sure the drum is empty before running

Calibration.

1. Power off, and then power on the

washing machine.

2. Hold down Temp. Delay End and

simultaneously for 3 seconds to enter

Calibration mode. The “ ” message CB

appears.

3. Press Start/Pause to run the

Calibration cycle.

4. The drum will rotate clockwise

and counter-clockwise for about 3

minutes.

5. When the cycle is complete, “ ” appears 0

on the display and the washing machine

will turn off automatically.

6. The washing machine is now ready for

use.

Q1256S_DC68-03506Q_EN.indd 23 2015/5/14 14:15:17

24 English

Before you start

Laundry guidelines

STEP 1 Sort

Sort the laundry according to these

criteria:

• Care Label: Sort the laundry into cottons,

mixed bres, synthetics, silks, wools, and

rayon.

• Colour: Separate whites from colours.

• Size: Mixing different-sized items

together in the drum improves the

washing performance.

• Sensitivity: Wash delicate items

separately using an Easy Iron option for

pure, new woollen items, curtains, and

silk items. Check the labels on the items.

NOTE

Make sure to check the care label on the

clothing, and sort them accordingly before

starting the wash.

STEP 2 Empty pockets

Empty all the pockets of your laundry

items

• Metal objects such as coins, pins, and

buckles on clothing may damage other

laundry items as well as the drum.

Turn clothing with buttons and

embroideries inside out

• If pants or jacket zippers are open while

washing, the drum may be damaged.

Zippers should be closed and xed with

a string.

• Clothing with long strings may become

entangled with other clothes. Make sure

to tie the strings before starting the

wash.

STEP 3 Use a laundry net

• Brassieres (water washable) must be

placed in a laundry net. Metal parts of

the brassieres may break through and

tear other laundry items.

• Small, light clothing such as socks,

gloves, stockings, and handkerchiefs

may become caught around the door.

Place them inside a ne laundry net.

• Do not wash the laundry net by itself

without other laundry. This may cause

abnormal vibrations that could move the

washing machine and result in injury.

Q1256S_DC68-03506Q_EN.indd 24 2015/5/14 14:15:17

English 25

Before you start

STEP 4 Prewash (if necessary)

Select the Prewash option for the selected

course if the laundry is heavily soiled. Do

not use the Prewash option when detergent

is manually added into the drum.

STEP 5 Determine the load capacity

Do not overload the washing machine.

Overloading may cause the washing

machine to not wash properly. For the load

capacity for the type of clothing, see page

32.

NOTE

When washing bedding or bedding covers,

the wash time may be lengthened or the

spin efciency may be reduced. For bedding

or bedding covers, the recommended

maximum spin cycle speed is 800 rpm, and

the load capacity is 1.5~2.0 kg or less.

CAUTION

If the laundry is unbalanced and the “UB”

information code is displayed, redistribute

the load. Unbalanced laundry may reduce

the spinning performance.

STEP 6 Apply a proper detergent

type

The type of detergent depends on the type

of fabric (cotton, synthetic, delicate items,

wool), colour, wash temperature, and degree

of soiling. Always use “low suds” laundry

detergent, which is designed for automatic

washing machines.

NOTE

• Follow the detergent manufacturer’s

recommendations based on the weight

of the laundry, the degree of soiling, and

the hardness of the water in your local

area. If you are not sure about the water

hardness, contact a local water authority.

• Do not use detergent that tends to be

hardened or solidied. This detergent

may remain after the rinse cycle,

blocking the drain outlet.

CAUTION

When washing wool using the wool course,

use only a neutral liquid detergent. If used

with the Wool course, powder detergent

may remain on the laundry and discolour

the laundry.

Q1256S_DC68-03506Q_EN.indd 25 2015/5/14 14:15:18

26 English

Before you start

Detergent drawer guidelines

The washing machine provides a three-compartment dispenser: the left compartment for the

main wash, the front-right for fabric softeners, and the rear-right for the preliminary wash.

01 Prewash compartment: Apply

prewash detergent or starch.

02 Main-wash compartment: Apply

main-wash detergent, water softener,

soaking detergent, bleach, and/or stain

removers.

03 Softener compartment: Apply

additives such as fabric softener. Do not

exceed the max line (A).

CAUTION

• Do not open the detergent drawer while the washing machine is operating.

• Do not use the following types of detergent:

• Tablet or capsule types

• Ball or net types

• To prevent the compartment clogging, concentrated or highly-enriched agents (fabric

softener or detergent) must be diluted with water before being applied.

To apply washing agents to the detergent drawer

1. Slide open the detergent drawer.

2. Apply laundry detergent to the .

main-wash compartment as instructed

or recommended by the manufacturer.

To use liquid detergent, see page 28.

Q1256S_DC68-03506Q_EN.indd 26 2015/5/14 14:15:20

English 27

Before you start

3. Apply fabric softener to the softener

compartment. Do not exceed the max

line (A).

4. If you want to prewash, apply

prewash detergent to the prewash

compartment as instructed or

recommended by the manufacturer.

5. Close the detergent drawer.

CAUTION

• Do not apply powder detergent to the

liquid container.

• Concentrated fabric softener must be

diluted with water before applied.

• Do not apply main-wash detergent to

the softener compartment.

Q1256S_DC68-03506Q_EN.indd 27 2015/5/14 14:15:20

28 English

Before you start

To use liquid detergent (applicable models only)

First insert the provided liquid container

in the main-wash compartment. Then,

apply liquid detergent to the container

below the marked max line (A).

CAUTION

• Do not exceed the max line that is

marked inside the container.

• Remove the liquid container if using

powder detergent.

Q1256S_DC68-03506Q_EN.indd 28 2015/5/14 14:15:21

English 29

Operations

Control panel

03 04 05 06 07

01 Cycle Selector Turn the dial to select a cycle.

02 Display The display shows current cycle information and estimated time

remaining, or an information code when a problem occurs.

03 Temp. Press to change the water temperature for the current cycle.

04 Spin

Press to change the spinning speed for the current course.

• Rinse Hold No indicator( ) : The nal rinse process is suspended so

that the laundry remains in the water. To unload the laundry, run a

drain or spin process.

• No Spin : The drum does not spin after the nal drain process.

05 Options

Press to select an option from Intensive( ), Prewash( ), Rinse+( ),

Intensive( ) + Prewash( ), Intensive( ) + Rinse+( ), Prewash

( ) + Rinse+( ), Intensive( ) + Prewash( ) + Rinse+( ). Press

again to deselect.

06 Delay End

Delay End lets you set the end time of the current cycle. Based

on your settings, the start time of the cycle will be determined by

the machine’s internal logic. For example, this setting is useful for

programming your machine to nish a wash at the time you normally

return home from work.

• Press to choose a preset unit of hours.

Q1256S_DC68-03506Q_EN.indd 29 2015/5/14 14:15:22

30 English

Operations

07 Bubble Soak

Press to activate/deactivate the Bubble Soak function. This function

helps remove a wide variety of stubborn stains.

• Bubble Soak helps remove a variety of stubborn stains.

• With Bubble Soak selected, laundry is thoroughly soaked in water

bubbles for effective washing.

• Bubble Soak is available with and adds up to 30 minutes (or 20

minutes) to 3 cycles: Cotton, Synthetics, and Baby Care.

08 Power Press to turn on/off the washing machine.

09 Start/Pause Press to start or stop an operation.

Q1256S_DC68-03506Q_EN.indd 30 2015/5/14 14:15:22

English 31

Operations

Simple steps to start

543

1. Press Power to turn on the washing machine.

2. Turn the Cycle Selector to select a course.

3. Change the cycle settings (Temp. Spin and ) as necessary.

4. To add an option, press . Use the button again to choose a preferred item.Options

5. The machine provides two quick menus of , and for your Delay End Bubble Soak

convenience. If you want to use one, press the corresponding button.

6. Press Start/Pause.

To change the cycle during operation

1. Press Start/Pause to stop operation.

2. Select a different cycle.

3. Press Start/Pause again to start the new cycle.

Q1256S_DC68-03506Q_EN.indd 31 2015/5/14 14:15:22

32 English

Operations

Course overview

Standard courses

Course Description

Max load (kg)

8kg

model

7&6kg

model

COTTON

• For cottons, bed linens, table linens, underwear,

towels, or shirts.

The washing time and the rinse count are

automatically adjusted according to the load.

Max Max

COTTON

• Optimal performance with lower energy

for cotton fabrics, bed linens, table linens,

underwear, towels, or shirts.

Max Max

SYNTHETICS

• For blouses or shirts that are made of polyester

(diolen, trevira), polyamide (perlon, nylon), or

the like.

4 3

SPIN • Featuring an additional spin process to

effectively remove moisture from laundry. - -

RINSE+SPIN • Featuring an additional rinse process after

applying fabric softener to the laundry. - -

ECO DRUM CLEAN

• Cleans the drum by removing dirt and bacteria

from the drum.

• Perform once every 40 washes with no

detergent or bleach applied.

• Make sure the drum is empty.

• Do not use any cleaning agents for cleaning the

drum.

- -

SUPER ECO WASH • Low-temperature Eco Bubble helps reduce

power consumption. 3 3

15’ QUICK WASH • For lightly soiled garments in less than 2.0 kg

that you want to wash quickly. 2 2

WOOL

• The wool course features gentle cradling

and soaking to protect the wool bres from

shrinkage/distortion.

• A neutral detergent is recommended.

2 2

Q1256S_DC68-03506Q_EN.indd 32 2015/5/14 14:15:22

English 33

Operations

Course Description

Max load (kg)

8kg

model

7&6kg

model

BABY CARE

• Featuring a high-temperature wash and extra

rinses to help remove the remaining detergent

effectively.

3 3

OUTDOOR CARE

• For outdoor clothes, skiwear, and sportswear

that are made of functional materials such as

spandex, stretch, and micro-bre.

2 2

DARK GARMENT

• Featuring additional rinses and reduced

spinning to ensure that the laundry is washed

gently and rinsed thoroughly.

3 3

Options

Option Description

Intensive • For badly soiled laundry. The operation time for each cycle is

longer than normal.

Pre Wash • This will add a preliminary washing cycle before the main

wash cycle.

Rinse+ • Press this button to add additional rinse cycles.

Q1256S_DC68-03506Q_EN.indd 33 2015/5/14 14:15:22

34 English

Operations

Delay End

You can set the washing machine to nish your wash automatically at a later time, choosing a

delay of between 1 to 19 hours (in 1 hour increments). The hour displayed indicates the time

the wash will nish.

1. Select a cycle. Then change the cycle settings if necessary.

2. Press Delay End repeatedly until a desired end time is set.

3. Press Start/Pause.

The corresponding indicator turns on with the clock running.

4. To cancel the , restart the washing machine by pressing Delay End Power.

Real-life case

You want to nish a two-hour course 3 hours later from now. For this, you add the Delay End

option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m. Then,

what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m.

Provided below is the time line for this example.

2:00 pm

Set the Delay End to 3 hours

3:00 pm

Start

5:00 pm

End

Q1256S_DC68-03506Q_EN.indd 34 2015/5/14 14:15:23

English 35

Operations

Settings

Child Lock

To prevent accidents involving children, the

Child Lock function locks all buttons.

However, Child Lock does not activate until

you press Start/Pause.

In the holding state, you can open the

door or change settings by pressing

corresponding buttons. However, once

you press to start the washing Start/Pause

machine, the Child Lock will be reactivated.

• Child Lock locks all buttons except for

Power.

• To activate or deactivate Child Lock, hold

down Temp. Spin and simultaneously for

3 seconds.

NOTE

To add detergent, put more laundry in the

drum, or change the cycle settings whilst

in the Child Lock state, you must rst

deactivate the Child Lock.

Sound On/Off

You can turn on or off the key tone, beep,

or alarm. Your setting will remain effective

after you restart the machine.

• To mute the sound, hold down and Spin

Options simultaneously for 3 seconds.

• To unmute the sound, hold down again

for 3 seconds.

Q1256S_DC68-03506Q_EN.indd 35 2015/5/14 14:15:23

36 English

Maintenance

Keep the washing machine clean to prevent deteriorated performance and to preserve its life

cycle.

Eco drum clean

Perform this course regularly to clean the

drum and to remove bacteria from it.

1. Press Power to turn on washing

machine.

2. Turn the to select Cycle Selector ECO

DRUM CLEAN.

3. Press Start/Pause.

NOTE

The water temperature for ECO DRUM

CLEAN is set to 70 °C, which cannot be

changed.

Due to the features of the washing machine,

the water temperature is set to 70 ˚C during

the Eco Drum Clean cycle, but the display

can only show 60 ˚C on the control panel.

CAUTION

Do not use any cleaning agents for cleaning

the drum. Chemical residue in the drum

deteriorates the washing performance.

ECO DRUM CLEAN reminder

• The ECO DRUM CLEAN reminder appears

on the main screen once every 40

washes. It is advisable to perform the

ECO DRUM CLEAN regularly.

• When you rst see this reminder,

you can ignore the reminder for 6

consecutive times. From the 7th wash,

the reminder does not appear. However,

it appears again on the second 40

wash.

Q1256S_DC68-03506Q_EN.indd 36 2015/5/14 14:15:23

English 37

Maintenance

Smart check

To enable this function, you must rst download the Samsung Smart Washer app at the Play

Store or the Apple Store, and install it on a mobile device featuring a camera operation.

The Smart Check function has been

optimized for Galaxy & iPhone series

(applicable models only).

1. Press and hold Options and Delay End

simultaneously for 3 seconds to enter

the Smart Check mode.

2. The washing machine starts the self-

diagnosis procedure and displays

an information code if a problem is

detected.

3. Run the Samsung Smart Washer app

on your mobile device, and tap Smart

Check.

4. Put the mobile device close to the

washing machine’s display so that the

mobile device and the washing machine

face each other. Then, the information

code will be recognized automatically by

the app.

5. When the information code is

recognized correctly, the app provides

detailed information about the problem

with applicable counteractions.

NOTE

• The function name, Smart Check, may

differ depending on the language.

• If the washing machine reets light

on the display, the app may fail to

recognize the information code.

• If the app fails to recognize the Smart

Check code consecutively, enter the

information code manually onto the app

screen.

Q1256S_DC68-03506Q_EN.indd 37 2015/5/14 14:15:23

English 39

Maintenance

Cleaning

Surface of the washing machine

Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the

washing machine.

Mesh lter

Clean the mesh lter of the water hose once or twice a year.

1. Turn off the washing machine, and

unplug the power cord.

2. Close the water tap.

3. Loosen and disconnect the water hose

from the back of the washing machine.

Cover the hose with a cloth to prevent

water from gushing out.

4. Use pliers to pull out the mesh lter

from the inlet valve.

5. Submerge the mesh lter deeply in

water so that the threaded connector is

also submerged.

6. Dry the mesh lter completely in the

shade.

7. Reinsert the mesh lter into the inlet

valve, and reconnect the water hose to

the inlet valve.

8. Open the water tap.

NOTE

If the mesh lter is clogged, an information code of “ ” appears on the screen.4C

Q1256S_DC68-03506Q_EN.indd 39 2015/5/14 14:15:25

40 English

Maintenance

Pump lter

It is advisable to clean the pump lter 5 or 6 times a year to prevent its clogging. A clogged

pump lter may reduce the bubble effect.

1. Turn off the washing machine, and

unplug the power cord.

2. Drain the remaining water inside the

drum drum. See the “Emergency drain”

section.

3. Open the lter cover using a coin or key.

4. Turn the knob to the left, pump lter (A)

and drain off the remaining water.

5. Clean the pump lter using soft brushes.

Make sure the drain pump propeller

inside the lter is unclogged.

6. Reinsert the pump lter, and turn the

lter knob to the right.

NOTE

• Some pump lters feature a safety knob

that is designed to prevent accidents

by children. To open the safety knob

of the pump lter, push in and turn it

anticlockwise. The spring mechanism of

the safety knob helps open the lter.

• To close the safety knob of the pump

lter, turn it clockwise. The spring makes

a rattling sound, which is normal.

NOTE

If the pump lter is clogged, an information code of “ ” appears on the screen.5C

Q1256S_DC68-03506Q_EN.indd 40 2015/5/14 14:15:28

English 41

Maintenance

CAUTION

• Make sure the lter cap is closed properly after cleaning the lter. Otherwise, this may

cause a leak.

• Make sure the lter is inserted properly after cleaning it. Otherwise, this may cause an

operational failure or a leak.

Detergent Drawer

1. While holding down the release lever (A)

on the inner of the drawer, slide open

the drawer.

2. Remove the release lever and the liquid

detergent container from the drawer.

3. Clean the drawer components in owing

water using a soft brush.

4. Clean the drawer recess using a soft

brush.

5. Reinsert the release lever and the liquid

detergent container to the drawer.

6. Slide the drawer inward to close it.

Q1256S_DC68-03506Q_EN.indd 41 2015/5/14 14:15:28

English 43

Troubleshooting

Checkpoints

If you encounter a problem with the washing machine, rst check the table below and try the

suggestions.

Problem Action

Does not start.

• Make sure the washing machine is plugged in.

• Make sure the door is properly closed.

• Make sure the water taps are open.

• Make sure to press or tap Start/Pause to start the washing

machine.

• Make sure Child Lock is not activated.

• Before the washing machine starts to ll, it will make a series

of clicking noises to check the door lock and does a quick

drain.

• Check the fuse or reset the circuit breaker.

Water supply is

insufcient, or no

water is supplied.

• Fully open the water tap.

• Make sure the door is properly closed.

• Make sure the water supply hose is not frozen.

• Make sure the water supply hose is not kinked or clogged.

• Make sure there is sufcient water pressure.

After a cycle,

detergent remains in

the detergent drawer.

• Make sure the washing machine is running with sufcient

water pressure.

• Make sure the detergent is added to the centre of the

detergent drawer.

• Make sure the rinse cap is inserted properly.

• If using granular detergent, make sure the detergent selector

is in the upper position.

• Remove the rinse cap and clean the detergent drawer.

Q1256S_DC68-03506Q_EN.indd 43 2015/5/14 14:15:29

44 English

Troubleshooting

Problem Action

Excessive vibrations

or makes noise.

• Make sure the washing machine is installed on a level, solid

oor that is not slippery.

If the oor is not level, use the levelling feet to adjust the

height of the washing machine.

• Make sure the shipping bolts are removed.

• Make sure the washing machine is not contacting any other

object.

• Make sure the laundry load is balanced.

• The motor can cause noise during normal operation.

• Overalls or metal-decorated clothes can cause noise while

being washed. This is normal.

• Metal objects such as coins can cause noise. After washing,

remove these objects from the drum or lter case.

Does not drain and/ or

spin.

• Make sure the drain hose is straightened all the way to the

drain system. If you encounter a drain restriction, call for

service.

• Make sure the debris lter is not clogged.

• Close the door and press or tap Start/Pause. For your safety,

the washing machine will not tumble or spin unless the door

is closed.

• Make sure the drain hose is not frozen or clogged.

• Make sure the drain hose is connected to a drain system that

is not clogged.

• If the washing machine is not supplied with sufcient power,

the washing machine temporarily will not drain or spin.

As soon as the washing machine regains sufcient power, it

will operate normally.

The door does not

open.

• Press or tap Start/Pause to stop the washing machine.

• It may take a few moments for the door lock mechanism to

disengage.

• The door will not open until 3 minutes after the washing

machine has stopped or the power turned off.

• Make sure all the water in the drum is drained.

• The door may not open if water remains in the drum. Drain

the drum and open the door manually.

• Make sure the door lock light is off. The door lock light turns

off after the washing machine has drained.

Q1256S_DC68-03506Q_EN.indd 44 2015/5/14 14:15:29

English 45

Troubleshooting

Problem Action

Excessive suds.

• Make sure the Auto Detergent and Auto Softener settings are

properly congured.

• Make sure you use the recommended types of detergent as

appropriate.

• Use high efciency (HE) detergent to prevent oversudsing.

• Reduce the detergent amount for soft water, small loads, or

lightly soiled loads.

• Non-HE detergent is not recommended.

Cannot apply

additional detergent.

• Make sure the remaining amount of detergent and fabric

softener is not over the limit.

• Make sure the Auto Dispense function is activated, with both

the Water Hardness and Concentration settings properly

specied.

Stops.

• Plug the power cord into a live electrical outlet.

• Check the fuse or reset the circuit breaker.

• Close the door and press or tap Start/Pause to start the

washing machine.

For your safety, the washing machine will not tumble or spin

unless the door is closed.

• Before the washing machine starts to ll, it will make a series

of clicking noises to check the door lock and does a quick

drain.

• There may be a pause or soak period in the cycle. Wait briey

and the washing machine may start.

• Make sure the mesh lter of the water supply hose at the

water taps are not clogged. Periodically clean the mesh lter.

• If the washing machine is not supplied with sufcient power,

the washing machine temporarily will not drain or spin. As

soon as the washing machine regains sufcient power, it will

operate normally.

Q1256S_DC68-03506Q_EN.indd 45 2015/5/14 14:15:29

46 English

Troubleshooting

Problem Action

Fills with the wrong

water temperature.

• Fully open both taps.

• Make sure the temperature selection is correct.

• Make sure the hoses are connected to the correct taps. Flush

water lines.

• Make sure the water heater is set to supply a minimum

120 °F (49 °C) hot water at the tap. Also, check the water

heater capacity and recovery rate.

• Disconnect the hoses and clean the mesh lter. The mesh lter

may be clogged.

• While the washing machine lls, the water temperature may

change as the automatic temperature control feature checks

incoming water temperature. This is normal.

• While the washing machine lls, you may notice just hot and/

or just cold water going through the dispenser when cold or

warm temperatures are selected.

This is a normal function of the automatic temperature

control feature as the washing machine determines the water

temperature.

Load is wet at the end

of a cycle.

• Use the High or Extra High spin speed.

• Use high efciency (HE) detergent to reduce oversudsing.

• Load is too small. Small loads (one or two items) may become

unbalanced and not spin completely.

• Make sure the drain hose is not kinked or clogged.

Leaks water.

• Make sure the door is properly closed.

• Make sure all hose connections are tight.

• Make sure the end of the drain hose is correctly inserted and

secured to the drain system.

• Avoid overloading.

• Use high efciency (HE) detergent to prevent oversudsing.

Has odours.

• Excessive suds collect in recesses and can cause foul odours.

• Run cleansing cycles to sanitize periodically.

• Clean the door seal (diaphragm).

• Dry the washing machine interior after a cycle has nished.

No bubbles are seen

(Bubbleshot models

only).

• Overloading may screen bubbles.

• Severely contaminated laundry may not generate bubbles.

Q1256S_DC68-03506Q_EN.indd 46 2015/5/14 14:15:29

English 47

Troubleshooting

Problem Action

Wi-Fi does not work

(Wi-Fi models only).

• Make sure the Internet connection to your house is properly

established.

• Make sure the router turns on and operates normally.

• Make sure you have installed the latest version of the Smart

Control App.

If a problem persists, contact a local Samsung service centre.

Q1256S_DC68-03506Q_EN.indd 47 2015/5/14 14:15:29

48 English

Troubleshooting

Information codes

If the washing machine fails to operate, you may see an information code on the screen.

Check the table below and try the suggestions.

Problem Action

Water is not supplied.

• Make sure the water taps are open.

• Make sure the water hoses are not clogged.

• Make sure the water taps are not frozen.

• Make sure the washing machine is operating with sufcient

water pressure.

• Make sure that the cold water tap and the hot water tap are

properly connected.

• Clean the mesh lter as it may be clogged.

NOTE

When the washer displays the “4C” code, the washer do

draining for 3 minutes. During this time, the Power button is

inoperative.

4C2

• Make sure the cold water supply hose is rmly connected to

the cold water tap.

If it is connected to the hot water tap, the laundry may be

deformed with some cycles.

Water is not draining.

• Make sure the drain hose is not frozen or clogged.

• Make sure the drain hose is positioned correctly, depending

on the connection type.

• Clean the debris lter as it may be clogged.

• Make sure the drain hose is straightened all the way to the

drain system.

• If the information code remains, contact a customer service

centre.

Operating the washer with the door open.

• Make sure the door is properly closed.

• Make sure laundry is not caught in the door.

Water is overowed.

• Restart after spinning.

• If the information code remains on the display, contact a local

Samsung service centre.

Q1256S_DC68-03506Q_EN.indd 48 2015/5/14 14:15:29

English 49

Troubleshooting

Problem Action

Check the drain hose.

• Make sure the end of the drain hose is placed on the oor.

• Make sure the drain hose is not clogged.

• If the information code remains, contact a customer service

centre.

NOTE

When the washer displays the “LC/LC1” code, the washer do

draining for 3 minutes. During this time, the Power button is

inoperative.

LC1

Spinning does not work.

• Make sure laundry is spread out evenly.

• Make sure the washing machine is on a at, stable surface.

• Redistribute the load. If only one item of clothing needs

washing, such as a bathrobe or pair of jeans, the nal spin

result might be unsatisfactory, and an “ ” check message UB

will be shown in the display.

Check the motor for operation.

• Try restarting the cycle.

• If the information code remains, contact a customer service

centre.

The electronic control needs to be checked (Over Voltage Error).

• Check the PCB and wire harness.

• Check if power is supplied properly

• If the information code remains, contact a customer service

centre.

Low voltage detected

• Check if the power cord is plugged in.

• If the information code remains, contact a customer service

centre.

High temperature heating check

• If the information code remains, contact a customer service

centre.

Q1256S_DC68-03506Q_EN.indd 49 2015/5/14 14:15:29

English 51

Specications

Fabric care chart

The following symbols provide garment care directions. The care labels include four symbols

in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary).

The use of symbols ensures consistency among garment manufacturers of domestic and

imported items. Follow the care label directions to maximize garment life and reduce laundry

problems.

Resistant material Do not iron

Delicate fabric Can be dry cleaned using any

solvent

Item can be washed at 95 ˚C Dry Clean

Item can be washed at 60 ˚C

Dry clean with perchloride,

lighter fuel, pure alcohol or

R113 only

Item can be washed at 40 ˚C Dry clean with aviation fuel,

pure alcohol or R113 only

Item can be washed at 30 ˚C Do not dry clean

Hand wash only Dry at

Dry clean only Can be hung to dry

Can be bleached in cold water Dry on clothes hanger

Do not bleach Tumble dry, normal heat

Can be ironed at 200 ˚C max Tumble dry, reduced heat

Can be ironed at 150 ˚C max Do not tumble dry

Can be ironed at 100 ˚C max

Q1256S_DC68-03506Q_EN.indd 51 2015/5/14 14:15:32

52 English

Specications

Protecting the environment

• This appliance is manufactured from recyclable materials. If you decide to dispose of this

appliance, please observe local waste disposal regulations. Cut off the power cord so that

the appliance cannot be connected to a power source. Remove the door so that animals

and small children cannot get trapped inside the appliance.

• Do not exceed the detergent quantities recommended in the detergent manufacturer’s

instructions.

• Use stain removal products and bleaches before the wash cycle only when strictly

necessary.

• Save water and electricity by only washing full loads (the exact amount depends upon

the program used).

Q1256S_DC68-03506Q_EN.indd 52 2015/5/14 14:15:32

54 English

Specications

Specication sheet

“ * ” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).

Type Front loading washing machine

Model name J1254S / J1254

J1252S / J1252 B1253S / B1253

Dimensions W600 x D550 x H850 (mm)

Water pressure 50 kPa ~ 800 kPa

NET weight 59 kg

Wash and spin capacity 7.0 kg 6.0 kg

Power

consumption

Washing 220 V 150 W

240 V 150 W

Washing

and heating

220 V 2000 W

240 V 2400 W

Spin 220 ~ 240 V 350 W

Pumping 30 W

Spin revolutions 1200 rpm

NOTE

The design and specications are subject to change without notice for quality improvement

purposes.

Q1256S_DC68-03506Q_EN.indd 54 2015/5/14 14:15:32

Memo

Q1256S_DC68-03506Q_EN.indd 55 2015/5/14 14:15:32

DC68-03506Q-00

QUESTIONS OR COMMENTS?

COUNTRY CALL OR VISIT US ONLINE AT

IRAN 021-8255 [CE]

021-42132 [HHP] www.samsung.com/iran/support

Q1256S_DC68-03506Q_EN.indd 56 2015/5/14 14:15:32

DC68-03506Q-00

Q1256S_DC68-03506Q_FA.indd 1 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 2 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 3 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 4 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 5 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 6 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 7 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 8 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 9 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 10 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 11 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 12 2015/5/14 14:18:08

Q1256S_DC68-03506Q_FA.indd 13 2015/5/14 14:18:09

Q1256S_DC68-03506Q_FA.indd 14 2015/5/14 14:18:09

Q1256S_DC68-03506Q_FA.indd 16 2015/5/14 14:18:09

Q1256S_DC68-03506Q_FA.indd 17 2015/5/14 14:18:10

Q1256S_DC68-03506Q_FA.indd 18 2015/5/14 14:18:10



Q1256S_DC68-03506Q_FA.indd 19 2015/5/14 14:18:10

Q1256S_DC68-03506Q_FA.indd 21 2015/5/14 14:18:11

Specyfikacje produktu

Marka:	Samsung
Kategoria:	pralka
Model:	J1254S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Samsung J1254S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Samsung

Samsung P1205J Instrukcja

8 Kwietnia 2025

Samsung J1055 Instrukcja

8 Kwietnia 2025

Samsung h 1255 ags titanium Instrukcja

6 Kwietnia 2025

Samsung WD106UHSAWQ Instrukcja

5 Kwietnia 2025

Samsung SW56APP Instrukcja

4 Kwietnia 2025

Samsung WA15F7S4UWA Instrukcja

4 Kwietnia 2025

Samsung WA13R3Q3IW Instrukcja

4 Kwietnia 2025

Samsung WA12K2S1 Instrukcja

4 Kwietnia 2025

Samsung WD10T634DBN Instrukcja

3 Kwietnia 2025

Samsung WW60J3280HS Instrukcja

2 Kwietnia 2025

Instrukcje pralka

Najnowsze instrukcje dla pralka

Electrolux ew 814 f Instrukcja

9 Kwietnia 2025

Whirlpool AWO 6626 Instrukcja

9 Kwietnia 2025

Zanussi ZWF1112W Instrukcja

9 Kwietnia 2025

AEG-Electrolux lavamat 86850 a Instrukcja

9 Kwietnia 2025

Ariston AVL89 Instrukcja

9 Kwietnia 2025

Bauknecht wa 1402 symphony Instrukcja

9 Kwietnia 2025

Electrolux ewf 1230 Instrukcja

9 Kwietnia 2025

Friac wa 1231 e Instrukcja

9 Kwietnia 2025

Zanussi-electrolux fjs 1486 x Instrukcja

9 Kwietnia 2025

Miele WSE383 WCS Instrukcja

9 Kwietnia 2025