Instrukcja obsługi Samsung AR24NVFXAWKXSV

Samsung klimatyzacja AR24NVFXAWKXSV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samsung AR24NVFXAWKXSV (3 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Please scan this QR code for detail video of indoor unit installation.
In order to install the indoor unit, you must disassemble the cover panel rst. Please proceed following
instructions to disassemble and assemble the cover panel. Hooks (on the cover panel) may get damaged
If you apply excessive force as you disassemble and assemble the cover panel. Please follow the following
instructions.
Removing the screws
Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened
with screws. Remove the Cap screwrst and unfasten the screws so that you can disassemble the cover panel.
<Remove the Cap screw> <Unfasten the screw>
Cap Screw
Cover Panel
Removing the Cover panel (Before mounting the indoor unit)
The bottom panelts the main body using the side, center, and bottom hooks as shown. Unlock the side hooks
rst, and then unlock the center and bottom hooks.
Check the location of the hooks before removing the cover panel.
▶Location of the hooks on the central part
Number and location of the hooks
Center hook Bottom hook
※For specic Hook location and quantity, please
refer to cover panel with indicating arrows based
on physical goods.
Side
hooks
Center hooks
Bottom hooks
▶
Removing the hooks on the side
※Caution (fragile)
˗
Gently press the both side of the cover panel
inwards ( ) and release the hooks on both
sides( ).
▶
Removing the hooks on the central part
※Caution (fragile)
˗Use both hands
˗
Release each hook by pushing it up at an angle.
Assembling the Cover panel (After mounting the indoor unit)
To assemble the Cover panel, proceed in reverse
order of disassembling. Use both hands for
assembling and be extra careful not to damage
the pipes and drain hose. Lock the side, center, and
bottom hooks in this sequence. Tighten the bottom
panel with the screws, and close the screw holes with
their cap.
<Lock the side hook>
<Fasten the screw>
<Lock the bottom hook>
<Assemble the Cap screw>
※Please read instructions on the back of this manual for “Smart install mode”. (Only for single system.)
Disassembling/Assembling the Cover Panel for Indoor Unit Installation DB68-03934A-11
RAC 3050-PJT SIMPLE MANUAL_IM_EN_DB68-03934A-11.indd 1 2018-02-05 오후 3:35:16
Smart Install mode(Option) ※ For the multi system, this function is not supported.
1. Check the installation status of the air conditioner.
1) Check the power supply, service valve (if it's open), power cable of the indoor and outdoor unit and
amount of additional refrigerant required for pipe extension.
2) Status of the indicator after supplying the power : Standby status
2. When the air conditioner is in standby status, use the remote controller to start the Smart Install mode.
1) Press the [Set/Cancel , Cancel or SET], [Mode], [Power] button simultaneously for 4 seconds.
▶
Smart Install mode can be operated only with the supplied remote controller.
▶
During the Smart install mode procedure, remote controller cannot be operated.
※Remote controller may be different (image/functions) depending on the model.
2) Smart Install mode in progress
• 88 Display : Progress will be diplayed in 0~99.
• LED Display : Indicator on the indoor unit display will blink in sequence and then all indicators will
blink. (This will be repeated.)
Type 88 Display LED Display Series
Indoor unit indicator
LED1
LED2
LED3
AR*****F***
AR*****D***
AR*****S***
AR*****N***
AR*****X***
※Display may be different depending on the model.
3. Smart Install mode will end.
1) Smart Install mode will take approximately 7~13 minutes.
(Actual time may be different depending on the model.)
2) When Installation is successful : Smart Install mode will end with ringing sound and the air conditioner
will be in standby status. (Error message will not be displayed on the indoor unit indicator and the
remote controller and buttons on the indoor unit will work normally.)
3) When installation is not successful : Smart Install mode will end and error message will be displayed
on the indoor unit display.
• Take necessary measures when error occurs.
˗
Refer to the service manual for necessary measures for each error that occurs.
• Use the product after taking care of the error that occurs.
Error indicator
Error Measures to take by an installer
Display
LED Display
LED 1 LED 2 LED 3
/ / /
/
Commnuication
Error between
Indoor and
outdoor unit
1. Check the connection wire between
indoor and outdoor unit. (whether the
power cable and commnunication
cable is crossed or not)
Error on indoor
temperature sensor
1. Check the connection of the
connector
,
Error on indoor heat
exchanger
1. Check the connection of the
connector
Error on indoor
fan motor
1. Check the connection of the
connector
2. Remove foreign substance
(Check for the cause that
restrains motor)
display and
all LED blinks
EEPROM/
Option error 1. Re-set options
,
Refrigerant ow
blocking error
1. Check if the service valve is
completely open.
2. Check if there’s any blockage
in the refrigerant pipe which
connects indoor and outdoor unit.
3. Check for refrigerant leak.
Lack of
Refrigerant
(For Inverter
model only)
1. Check if sufcient amount of
additional refrigerant was charged for
the pipe length that exceeds 7.5 m.
2. Check for refrigerant leak between
valve and pipe connection.
※
Above LED pattern is displayed
when there’s error is occurred on
outdoor unit. Check the LED display
on outdoor unit for the details.
※ : Off / : Blinking / : On
RAC 3050-PJT SIMPLE MANUAL_IM_EN_DB68-03934A-11.indd 2 2018-02-05 오후 3:35:17

Specyfikacje produktu

Marka: Samsung
Kategoria: klimatyzacja
Model: AR24NVFXAWKXSV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Samsung AR24NVFXAWKXSV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje klimatyzacja Samsung

Samsung

Samsung RC080RTRGA Instrukcja

9 Października 2024
Samsung

Samsung AQV12ABAX Instrukcja

8 Października 2024
Samsung

Samsung AQ18UAN Instrukcja

8 Października 2024
Samsung

Samsung AQ18P0GED Instrukcja

8 Października 2024
Samsung

Samsung AQ18A1RE Instrukcja

8 Października 2024
Samsung

Samsung AQ12ULN Instrukcja

8 Października 2024
Samsung

Samsung AQ18 A1RE Instrukcja

8 Października 2024
Samsung

Samsung SH05ZZ8 Instrukcja

8 Października 2024
Samsung

Samsung SC05ZA8X Instrukcja

8 Października 2024
Samsung

Samsung AQ07RLN Instrukcja

8 Października 2024

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja

LG

LG HS-H076QPA0 Instrukcja

15 Października 2024
Klarstein

Klarstein Vita Pure 2G Instrukcja

15 Października 2024
Gree

Gree ETAC-15HP265V20B Instrukcja

15 Października 2024
Qlima

Qlima P 126 Instrukcja

14 Października 2024
Mitsubishi

Mitsubishi MSZ-CB22VA Instrukcja

14 Października 2024
Suntec

Suntec Motion 90+ Instrukcja

14 Października 2024
Fujitsu

Fujitsu Airstage ABHA014GTEH Instrukcja

14 Października 2024
Danby

Danby DTAC120B1WDB Instrukcja

14 Października 2024
Amana

Amana PTC093K35AXXX Instrukcja

14 Października 2024
Amana

Amana AMAP121AB-2 Instrukcja

14 Października 2024