Instrukcja obsługi Salus RT200


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Salus RT200 (8 stron) w kategorii termostat. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Instruction Manual
Model No RT200
Electronic Room Thermostat
2
RT200 INSTRUCTION MANUAL
2
PRODUCT COMPLIANCE
This product complies with the essential requirements of the following EC
Directives:
Electro-Magnetic Compatibility directive 2004/108/EC
Low Voltage Directive 2006/95/EEC
EC Marking directive 93/68/EEC
SAFETY INFORMATION
These instructions are applicable to the Salus Controls model stated on the
front cover of this manual only, and must not be used with any other make or
model.
These instructions are intended to apply in the United Kingdom only, and
should be followed along with any other statutory obligations.
This accessory must be fitted by a Competent person, and installation must
comply with the guidance provided in the current editions of BS7671 (IEE
Wiring Regulations) and Part ‘P’ of the Building Regulations. Failure to
comply with the requirements of these publications could lead to
prosecution.
Always isolate the AC Mains supply before carrying out any work on the
RT200 thermostat.
Please leave these instructions with the end user where they should be kept
in a safe place for future reference.
RT200 INSTRUCTION MANUAL 3
INTRODUCTION
A thermostat is a device that is used to switch
the heating system in your home on and off as
needed. It works by sensing the air
temperature and switching on the heating
when the air temperature falls below the
thermostat setting, and switching it off once
the set temperature has been reached.
The RT200 from Salus Controls is a stylish and
accurate electronic thermostat with a large,
easy to adjust setting dial. The thermostat has
been specifically designed to be used in 230V
AC heating applications.
Features
Simple to use
Large dial
Stylish Casing
LED heat call indicator
Temperature range between 5 ºC and 35 ºC
OPERATION
The RT200 is adjusted very easily by turning the rotary dial on the front of
the thermostat to the required temperature setting. To adjust the set
temperature, turn the rotary dial to the left to set a lower temperature, or to
the right to set a higher temperature.
The Light Emitting Diode (LED) on the front panel will light when the
temperature is below the set value, showing that the thermostat is calling for
heat from the boiler. Once the room reaches the set temperature, the LED
will turn off and the RT200 will stop calling for heat from the boiler.


Specyfikacje produktu

Marka: Salus
Kategoria: termostat
Model: RT200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Salus RT200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Salus

Salus

Salus RT310SR Instrukcja

15 Stycznia 2025
Salus

Salus SQ610BRF Instrukcja

11 Stycznia 2025
Salus

Salus CT100 Instrukcja

6 Października 2024
Salus

Salus PH60-1 Instrukcja

24 Września 2024
Salus

Salus ST620WBC Instrukcja

24 Września 2024
Salus

Salus HTRS 230 Instrukcja

23 Września 2024
Salus

Salus ST320 Instrukcja

23 Września 2024
Salus

Salus RT300 Funk Instrukcja

23 Września 2024
Salus

Salus RT 520 RF Instrukcja

23 Września 2024
Salus

Salus RT520RF Instrukcja

21 Września 2024

Instrukcje termostat

Najnowsze instrukcje dla termostat