Instrukcja obsługi RYOBI RSS280

RYOBI Sander RSS280

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI RSS280 (20 stron) w kategorii Sander. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

ORIGINAL INSTRUCTIONS

1/3 Sheet Sander

RSS280

Important!

It is essential that you read the instructions in this manual before assembling,

operating, and maintaining the product.

Subject to technical modification.

Safety, performance, and dependability have been given

top priority in the design of your 1/3 sheet sander.

INTENDED USE

The 1/3 sheet sander is intended for sanding and ﬁ nishing

metal, wood, plastic or similar materials using the abrasive

pads or sheets provided. The 1/3 sheet sander is intended

to be used by adult operators who have read the instruction

manual and understand the risks and hazards. The 1/3

sheet sander should only be used in well ventilated

areas. The 1/3 sheet sander is designed for dry sanding

only.

The 1/3 sheet sander is intended only for consumer use.

Do not use the product in any way other than those stated

in intended use. Use of the product for operations different

from intended could result in a hazardous situation.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings, instructions, illustrations

and specifications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

WORK AREA SAFETY

■Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

■Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

■Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

■Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

■Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

■Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

■Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

■When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

■If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

■Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

■Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

■Prevent unintentional starting. Ensure the switch

is in the off -position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

■Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

■Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

■Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

■If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

■Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

■Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

■Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

■Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

Specyfikacje produktu

Marka:	RYOBI
Kategoria:	Sander
Model:	RSS280
Kolor produktu:	Biały
Typ kontroli:	Buttons,Rotary
Wbudowany wyświetlacz:	Tak
Długość przewodu:	2 m
Położenie urządzenia:	Wolnostojący
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	220 - 240 V
Wysokość produktu:	850 mm
Szerokość produktu:	595 mm
Głębokość produktu:	610 mm
Waga produktu:	94000 g
Długość węża dopływowego:	1.6 m
Długość węża odpływowego:	1.5 m
Głębokość przy otwartych drzwiach:	987 mm
Ilość programów piorących:	9
Opóźniony start czasomierza:	Tak
Opóźniony start:	24 h
Pół wsadu:	Tak
Prąd:	10 A
Obciążenie:	2400 W
Pobór wody na cykl:	- l
Tryb wyłączenia:	0.3 W
Klasa efektywności energetycznej (stara):	A+++
Pranie zużywające energię:	0.88 kWh
Typ ładowania:	Od przodu
Zawias drzwiczek:	Prawy
Pojemność znamionowa:	7 kg
Maksymalna prędkość obrotu:	1400 RPM
Klasa wirowania (suszenia):	B
Poziom hałasu (pranie):	52 dB
Pozostała wilgoć:	52 %
Poziom hałasu (wirowanie):	76 dB
Programy prania:	Blouse/shirt,Cotton,Hand/wool,Quick,Delicate/silk
Czas cyklu (max):	209 min
Roczne zużycie energii pranie:	157 kWh
Roczne zużycie wody pranie:	10560 l
Pobór mocy w trybie czuwania:	1 W
Tworzywo rury:	Stal nierdzewna
Czas cyklu (program szybki):	15 min
Wstrzymanie płukania:	Tak
Brak płukania:	Tak