Instrukcja obsługi RYOBI RLT26C

RYOBI Podcinacz RLT26C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI RLT26C (16 stron) w kategorii Podcinacz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
STRING TRIMMER
OPERATOR’S MANUAL (Original Instructions)
RLT26C
Important! It is essential that you read the instructions in this manual before assembling,
maintaining and operating this machine.
Subject to technical modifications.
1
English (Original Instructions)
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NAME EXPLANATION
Safety Alert Symbol Indicates danger, warning or caution. It means attention! Your
safety is involved.
Re a d You r O p e r a to r s
Manual
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satisfaction and safe use.
Wear eye, hearing and
head protection
Wear eye, hearing and head protection when operating this
equipment.
Keep bystanders away Beware of thrown or flying objects. Keep all bystanders at least
15 m away.
No blade Do not use blade(s) on the product.
RPM Decal Rotational direction and maximum speed of the shaft for the
cutting attachment.
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
No Smoking Do not smoke when mixing fuel or filling fuel tank.
Petrol Use unleaded gasoline intended for motor vehicle use with an
octane rating of 91 ([R+M]/2) or higher.
Oil Use synthetic 2-stroke oil for air cooled engines.
Mix Petrol and Oil Mix the fuel mix thoroughly and also each time before refuelling.
Switch
On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
2
English (Original Instructions)
NAME EXPLANATION
Guaranteed sound power level is 108 dB.
Run position
Set the choke lever to “FULL” choke position.
Set the choke lever to “HALF” choke position.
Set the ignition switch to the “I” (ON) position.
Press the primer bulb 10 times.
Pull the starter grip to start.
Squeeze the throttle lock and throttle trigger to run.
Waiting time 10 seconds
To stop the engine, move the ignition switch to the O stop
position .
Keep hands away from blades.
EurAsian Conformity Mark
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
CAUTION (Without safety alert symbol) Indicates a situation that may result in property
damage.


Specyfikacje produktu

Marka: RYOBI
Kategoria: Podcinacz
Model: RLT26C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RYOBI RLT26C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podcinacz RYOBI

RYOBI

RYOBI One+ P20220 Instrukcja

9 Października 2024
RYOBI

RYOBI RBC36X26E Instrukcja

3 Września 2024
RYOBI

RYOBI RBC430SBS Instrukcja

28 Sierpnia 2024
RYOBI

RYOBI RLT5027 Instrukcja

26 Sierpnia 2024
RYOBI

RYOBI RLT183220 Instrukcja

26 Sierpnia 2024
RYOBI

RYOBI RLT3123 Instrukcja

26 Sierpnia 2024
RYOBI

RYOBI RLT1832133H Instrukcja

25 Sierpnia 2024
RYOBI

RYOBI RLT5030S Instrukcja

23 Sierpnia 2024

Instrukcje Podcinacz

Najnowsze instrukcje dla Podcinacz