Instrukcja obsługi Rollei City Traveler XL

Rollei statyw City Traveler XL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rollei City Traveler XL (2 stron) w kategorii statyw. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Attention
1. Do not overload the tripod.
2. Always tighten the center column lock if you use the tripod.
3. For your safety do not let the product touch any electric objects,
high voltage equipment and superactive chemicals.
4. Only use standard lubricant when necessary.
Cleaning
After using the tripod in water, sand or dust, please clean it carefully.
Therefore expand all legs and use a dry cloth to clean the tripod. If
it is completely wet, let it dry completely. If you have used it in salt
water or sand you should also clean and rinse it with fresh water.
ENGLISH
Center Column
To adjust the height of the center column loosen the center
column lock by turning it counter clockwise, move the center
column up or down to your desired height. Finally lock the center
column position by turning the center column lock clockwise.
Furthermore you can unscrew the hook at the bottom part of the
center column to insert it the other way round. This position is
used in macro photography.
Anti-rotate screw
If you have attached a ball head on the tripod you can firmly fix
it by using the anti-rotate screw. With this function the ball head
cannot screw of by accident. Use the wrench to screw the anti-
rotate screw inside the plate. Please make sure that the ball head
is fixed, but that the panoramic function can still be used. If the
anti-rotate screw is too tight, the panorama function of the ball
head might be blocked. If this is the case please unscrew the anti-
rotate screw a bit, until the panorama function is working well
again.
Hidden Hook
This hook can be used to put a counterweight onto the tripod.
This can be a sand bag, carry bag or others and it will increase the
stability of the tripod.
Silicone grip
Leg length adjustment
To adjust the leg length rotate clockwise the rubber feet totally.
Then you can pull out the leg completely. Finally please lock the
leg length by rotating it counter clockwise. Please note the leg
length can be locked at any position.
Instruction Manual Rollei City Traveler XL Tripod
Thank you for choosing this Rollei product. Please read the manual
carefully before you use this travel tripod.
The tripods of the City Traveler Series are made out of Carbon.
Therefore they are leightweight and due to there compact design,
these tripods are ideal for using them on your next city trip. City
Traveler tripods are especially designed for DSLM and DSLR cameras
and support them excellently.
Angle Adjustment
To change the leg angle press the angle adjustment knob down. Then you are able to change the leg‘s position. There are three lock-in
position on the leg angle adjustment. If you have put the leg up and then lower it down the leg angle adjustment will automatically go into
the lock-in positions. To put the tripod into the folded length, you need to put the leg to the top by folding it by 180°. Therefore press the
leg angle adjustment knob down and while you have pressed it push the leg to the top.
180° reverse folding
1
2
3
4
5
6
7
4 25–16 mm 42 cm 156 cm 23 cm 840 g 8 kg
1 2
3
5
4
6
7
9
10
11 12
6
2
3
4
5
1
78
Construction
Quick release plate
Platform
Ball
Ball housing
Ball head locking knob
Base locking knob
Base
Scale
Parts Name
Vertical spirit level
Platform locking knob
Anti-slip groove
Platform
How to install the quick release plate
Locking knob
Align the quick releaseplate in regard to the anti-slip screw and
anti-slip groove.
Anti-slip groove
Anti-slip screw
Align the quick release plate
Make sure that the quick release plate is well positioned and lock the
knob again.
Ball Head Locking Knob
To move the ball of the head loosen the ball head locking knob.
Then you can put the ball in the position you need. Then lock the
knob again. If the knob is locked but the top of the screw is in your
way, you can simply pull it up and adjust the position of the screw
and put it back. The screw itself will not be loosen by this operation.
Technical Specification
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
13
15
Loosen
Lock
14
16
17
19
18
stop
stop
Loosen
Lock
A
A
B
B
C
C
D
D
5
Ball Head
4.3 cm 4 cm 8.5 cm 275 g 8 kg

Specyfikacje produktu

Marka: Rollei
Kategoria: statyw
Model: City Traveler XL

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rollei City Traveler XL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje statyw Rollei

Rollei

Rollei Rock Solid Beta 180 Carbon Instrukcja

14 Grudnia 2024
Rollei

Rollei Rock Solid Alpha Mark II Instrukcja

3 Października 2024
Rollei

Rollei Lion Rock Stativkopf 20 Instrukcja

3 Października 2024
Rollei

Rollei Panoramakopf 200 Mark II Instrukcja

3 Października 2024
Rollei

Rollei Rock Solid Carbon Tripod Gamma 22580 Instrukcja

31 Sierpnia 2024
Rollei

Rollei City Traveler XL Instrukcja

28 Sierpnia 2024
Rollei

Rollei FPH-53P Instrukcja

23 Sierpnia 2024
Rollei

Rollei Rock Solid Carbon Tripod Alpha 22582 Instrukcja

4 Lipca 2024
Rollei

Rollei City Traveler Instrukcja

4 Lipca 2024
Rollei

Rollei Compact Traveler No. 1 Instrukcja

6 Maja 2024

Instrukcje statyw

Najnowsze instrukcje dla statyw

Ready Rig

Ready Rig GS Instrukcja

18 Grudnia 2024
Omnitronic

Omnitronic GBE-1 Instrukcja

14 Grudnia 2024
Robus

Robus Vantage Series 3 RCM-633 Instrukcja

13 Grudnia 2024
Oben

Oben CQL-13 Instrukcja

13 Grudnia 2024
Oben

Oben IBH-05 Instrukcja

13 Grudnia 2024
Robus

Robus RCMTT-1113 Instrukcja

13 Grudnia 2024
Oben

Oben GH3W-15 Instrukcja

13 Grudnia 2024
Robus

Robus RCTT-200 Instrukcja

13 Grudnia 2024
Ruggard

Ruggard RC-P18F Instrukcja

13 Grudnia 2024
Really Right Stuff

Really Right Stuff BH-40 Instrukcja

11 Grudnia 2024