Instrukcja obsługi Roland VR-50HD

Roland Niesklasyfikowane VR-50HD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland VR-50HD (48 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/48
Owner’s Manual (this document)
Read this rst. It explains the basic things you need to know in order to
use the VR-50HD.
PDF Manual (download from the Web)
• Reference Manual
This explains all parameters of the VR-50HD. It also describes the settings to
make when operating the unit by remote control.
To obtain the PDF manual
1. Enter the following URL in your computer.
http://proav.roland.com
2. Go to the VR-50HD product page and click the
“Support” tab.
Before using the VR-50HD, ensure that its system program is at the most recent version. For information on available upgrades for the system
program, see the Roland website (http://proav.roland.com).
Default setting of the system frame rate is 59.94 Hz.
When you want to operate in the Frame Rate of 50 Hz, you can set it at the
System screen.
NOTE
2
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING
USING THE UNIT SAFELY
WARNING
To completely turn o power to the unit, pull out
the plug from the outlet
Even with the power switch turned
o, this unit is not completely
separated from its main source of
power. When the power needs to
be completely turned o, turn o
the power switch on the unit, then pull out the
plug from the outlet. For this reason, the outlet
into which you choose to connect the power
cord’s plug should be one that is within easy
reach and readily accessible.
Never obstruct the ventilation holes
Doing so might impede safe
operation.
Do not disassemble or modify by yourself
Do not open (or modify in any way)
the unit or its AC adaptor.
WARNING
Do not repair or replace parts by yourself
Do not attempt to repair the unit,
or replace parts within it (except
when this manual provides specic
instructions directing you to do so).
Refer all servicing to your retailer,
the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the
“Information” sheet.
Do not use or store in the following types of
locations
• Subject to temperature extremes
(e.g., direct sunlight in an
enclosed vehicle, near a heating
duct, on top of heat-generating
equipment); or are
• Damp (e.g., baths, washrooms, on
wet oors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness.
Do not place in an unstable location
Make sure you always have the
unit placed so it is level and sure
to remain stable. Never place it on
stands that could wobble, or on
inclined surfaces.
WARNING
Use only the supplied AC adaptor and the correct
voltage
Be sure to use only the AC
adaptor supplied with the unit.
Also, make sure the line voltage
at the installation matches the
input voltage specied on the AC
adaptor’s body. Other AC adaptors may use a
dierent polarity, or be designed for a dierent
voltage, so their use could result in damage,
malfunction, or electric shock.
Use only the supplied power cord
Use only the attached power-supply
cord. Also, the supplied power cord
must not be used with any other
device.
Do not bend the power cord or place heavy objects
on it
Do not excessively twist or bend the
power cord, nor place heavy objects
on it. Doing so can damage the
cord, producing severed elements
and short circuits. Damaged cords
are re and shock hazards!
Avoid extended use at high volume
This unit, either alone or in
combination with an amplier
and headphones or speakers, may
be capable of producing sound
levels that could cause permanent
hearing loss. Do not operate for a long period
of time at a high volume level, or at a level
that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult
an audiologist.
Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 4). These sections provide important
information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature of
your new unit, read Owner’s manual in its entirety. This manual should be saved and kept on hand as a convenient reference.
USING THE UNIT SAFELY
3
WARNING
Don’t allow foreign objects or liquids to enter
unit; never place containers with liquid on unit
Do not place containers containing
liquid (e.g., ower vases) on this
product. Never allow foreign
objects (e.g., ammable objects,
coins, wires) or liquids (e.g., water or
juice) to enter this product. Doing
so may cause short circuits, faulty
operation, or other malfunctions.
Turn o the unit if an abnormality or malfunction
occurs
Immediately turn the unit o,
remove the AC adaptor from
the outlet, and request servicing
by your retailer, the nearest
Roland Service Center, or an
authorized Roland distributor, as listed on the
“Information” sheet when:
• The AC adaptor, the power-supply cord, or
the plug has been damaged; or
• If smoke or unusual odor occurs; or
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or
otherwise has become wet); or
• The unit does not appear to operate
normally or exhibits a marked change in
performance.
Adults must provide supervision in places where
children are present
Always make sure that an adult is
on hand to provide supervision and
guidance when using the unit in
places where children are present.
Do not drop or subject to strong impact
Protect the unit from strong impact.
(Do not drop it!)
Do not share an outlet with an unreasonable
number of other devices
Do not force the unit’s power-
supply cord to share an outlet with
an unreasonable number of other
devices.
Be especially careful when using
extension cords—the total power used by all
devices you have connected to the extension
cord’s outlet must never exceed the power
rating (watts/amperes) for the extension cord.
Excessive loads can cause the insulation on the
cord to heat up and eventually melt through.
Do not use overseas
Before using the unit in overseas,
consult with your retailer, the
nearest Roland Service Center, or
an authorized Roland distributor, as
listed on the “Information” sheet.
CAUTION
Place in a well ventilated location
The unit and the AC adaptor should
be located so their location or
position does not interfere with
their proper ventilation.
When disconnecting an AC adaptor, grasp it by the
plug
To prevent conductor damage,
always grasp the AC adaptor by its
plug when disconnecting it from
this unit or from a power outlet.
Periodically clean the AC adaptor’s plug
At regular intervals, you should
unplug the AC adaptor and clean it
by using a dry cloth to wipe all dust
and other accumulations away from
its prongs. Also, disconnect the
power plug from the power outlet whenever
the unit is to remain unused for an extended
period of time. Any accumulation of dust
between the power plug and the power outlet
can result in poor insulation and lead to re.
Manage cables for safety
Try to prevent cords and cables
from becoming entangled. Also, all
cords and cables should be placed
so they are out of the reach of
children.
Avoid climbing on top of the unit, or placing heavy
objects on it
Never climb on top of, nor place
heavy objects on the unit.
Do not connect or disconnect the AC adaptor with
wet hands
Never handle the AC adaptor or
its plugs with wet hands when
plugging into, or unplugging from,
an outlet or this unit.
Disconnect everything before moving the unit
Before moving the unit, disconnect
the AC adaptor and all cords
coming from external devices.
Unplug the AC adaptor from the outlet before
cleaning
Before cleaning the unit, turn it o
and unplug the AC adaptor from the
outlet (p. 12).
If there is a possibility of lightning strike,
disconnect the AC adaptor from the outlet
Whenever you suspect the
possibility of lightning in your area,
disconnect the AC adaptor from the
outlet.
CAUTION
Keep small items out of the reach of children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of small
children.
• Included Parts
RCA-BNC conversion plug (p. 15)
Handle the ground terminal carefully
If you remove the screw from the
ground terminal, be sure to replace
it; don’t leave it lying around where
it could accidently be swallowed by
small children. When refastening
the screw, make that it is rmly fastened, so it
won’t come loose.
Take care not to get burned
The area of SDI connectors on the
rear panel may become hot, so take
care to avoid burns.
Precautions concerning use of phantom power
supply
Always turn the phantom power
o when connecting any device
other than condenser microphones
that require phantom power.
You risk causing damage if you
mistakenly supply phantom power to dynamic
microphones, audio playback devices, or other
devices that don’t require such power. Be sure
to check the specications of any microphone
you intend to use by referring to the manual
that came with it.
• This instrument’s phantom power:
+48 V DC, 5 mA Max

Specyfikacje produktu

Marka: Roland
Kategoria: Niesklasyfikowane
Model: VR-50HD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roland VR-50HD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Roland

Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024
Roland

Roland RD-300GX Instrukcja

13 Października 2024
Roland

Roland Fantom FA-76 Instrukcja

12 Października 2024
Roland

Roland M-1000 Instrukcja

12 Października 2024
Roland

Roland RD-88 EX Instrukcja

9 Października 2024
Roland

Roland VR-400UHD Instrukcja

7 Października 2024
Roland

Roland KD-200 Instrukcja

7 Października 2024
Roland

Roland DM-10 Instrukcja

5 Października 2024
Roland

Roland RD-08 Instrukcja

4 Października 2024
Roland

Roland RCP800 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Florabest

Florabest HG05806 Instrukcja

15 Października 2024