Instrukcja obsługi Roland VK-88

Roland Niesklasyfikowane VK-88

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland VK-88 (112 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/112

USING THE UNIT SAFELY

001

• Before using this unit, make sure to read the

instructions below, and the Owner’s Manual.

..........................................................................................................

002a

• Do not open or perform any internal modifica-

tions on the unit.

..........................................................................................................

003

• Do not attempt to repair the unit, or replace parts

within it (except when this manual provides

specific instructions directing you to do so). Refer

all servicing to your retailer, the nearest Roland

Service Center, or an authorized Roland

distributor, as listed on the “Information” page.

..........................................................................................................

004

• Never use or store the unit in places that are:

• Subject to temperature extremes (e.g., direct

sunlight in an enclosed vehicle, near a heating

duct, on top of heat-generating equipment); or

are

• Damp (e.g., baths, washrooms, on wet floors);

or are

• Humid; or are

• Exposed to rain; or are

• Dusty; or are

• Subject to high levels of vibration.

..........................................................................................................

005

• This unit should be used only with a rack or stand

that is recommended by Roland.

..........................................................................................................

006

• When using the unit with a rack or stand recom-

mended by Roland, the rack or stand must be

carefully placed so it is level and sure to remain

stable. If not using a rack or stand, you still need

to make sure that any location you choose for

placing the unit provides a level surface that will

properly support the unit, and keep it from

wobbling.

..........................................................................................................

007

• Make sure you always have the unit placed so it is

level and sure to remain stable. Never place it on

stands that could wobble, or on inclined surfaces.

..........................................................................................................

008a

• The unit should be connected to a power supply

only of the type described in the operating instruc-

tions, or as marked on the unit.

..........................................................................................................

008e

• Use only the attached power-supply cord.

..........................................................................................................

009

• Do not excessively twist or bend the power cord,

nor place heavy objects on it. Doing so can

damage the cord, producing severed elements and

short circuits. Damaged cords are fire and shock

hazards!

..........................................................................................................

010

• This unit, either alone or in combination with an

amplifier and headphones or speakers, may be

capable of producing sound levels that could

cause permanent hearing loss. Do not operate for

a long period of time at a high volume level, or at

a level that is uncomfortable. If you experience

any hearing loss or ringing in the ears, you should

immediately stop using the unit, and consult an

audiologist.

..........................................................................................................

011

• Do not allow any objects (e.g., flammable material,

coins, pins); or liquids of any kind (water, soft

drinks, etc.) to penetrate the unit.

..........................................................................................................

Used for instructions intended to alert

the user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic

animals or pets.

Used for instructions intended to alert

the user to the risk of death or severe

injury should the unit be used

improperly.

The ●symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In

the case of the symbol at left, it means that the power-

cord plug must be unplugged from the outlet.

The symbol alerts the user to important instructions

or warnings.The specific meaning of the symbol is

determined by the design contained within the

triangle. In the case of the symbol at left, it is used for

general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never

be carried out (are forbidden). The specific thing that

must not be done is indicated by the design contained

within the circle. In the case of the symbol at left, it

means that the unit must never be disassembled.

USING THE UNIT SAFELY

012a:

• Immediately turn the power off, remove the

power cord from the outlet, and request servicing

by your retailer, the nearest Roland Service

Center, or an authorized Roland distributor, as

listed on the “Information” page when:

• The power-supply cord, or the plug has been

damaged; or

• If smoke or unusual odor occurs

• Objects have fallen into, or liquid has been

spilled onto the unit; or

• The unit has been exposed to rain (or otherwise

has become wet); or

• The unit does not appear to operate normally or

exhibits a marked change in performance.

..........................................................................................................

013

• In households with small children, an adult

should provide supervision until the child is

capable of following all the rules essential for the

safe operation of the unit.

..........................................................................................................

014

• Protect the unit from strong impact.

(Do not drop it!)

..........................................................................................................

015

• Do not force the unit’s power-supply cord to share

an outlet with an unreasonable number of other

devices. Be especially careful when using

extension cords—the total power used by all

devices you have connected to the extension

cord’s outlet must never exceed the power rating

(watts/amperes) for the extension cord. Excessive

loads can cause the insulation on the cord to heat

up and eventually melt through.

..........................................................................................................

016

• Before using the unit in a foreign country, consult

with your retailer, the nearest Roland Service

Center, or an authorized Roland distributor, as

listed on the “Information” page.

..........................................................................................................

101a

• The unit should be located so that its location or

position does not interfere with its proper venti-

lation.

..........................................................................................................

101c

• This (VK-88) for use only with Roland stand KS-

88, Roland rack RKS-88, Roland monitor speaker

DS-50A and DS-30A. Use with other stands, racks,

and monitor speaker are capable of resulting in

instability causing possible injury.

..........................................................................................................

102b

• Always grasp only the plug on the power-supply

cord when plugging into, or unplugging from, an

outlet or this unit.

..........................................................................................................

103a:

• Any accumulation of dust between the power

plug and the power outlet can result in poor

insulation and lead to fire. Periodically wipe away

such dust with a dry cloth. Also, disconnect the

power plug from the power outlet whenever the

unit is to remain unused for an extended period of

time.

..........................................................................................................

104

• Try to prevent cords and cables from becoming

entangled. Also, all cords and cables should be

placed so they are out of the reach of children.

..........................................................................................................

106

• Never climb on top of, nor place heavy objects on

the unit.

..........................................................................................................

107b

• Never handle the power cord or its plugs with wet

hands when plugging into, or unplugging from,

an outlet or this unit.

..........................................................................................................

108d: Selection

• If you need to move the instrument, take note of

the precautions listed below. At least two persons

are required to safely lift and move the unit. It

should be handled carefully, all the while keeping

it level. Make sure to have a firm grip, to protect

yourself from injury and the instrument from

damage.

• Check to make sure the knob bolts and screws

securing the unit to the stand have not become

loose. Fasten them again securely whenever

you notice any loosening.

• Disconnect the power cord.

• Disconnect all cords coming from external

devices.

• Remove the music stand.

..........................................................................................................

109a

• Before cleaning the unit, turn off the power and

unplug the power cord from the outlet (p. 19).

..........................................................................................................

110a

• Whenever you suspect the possibility of lightning

in your area, pull the plug on the power cord out

of the outlet.

..........................................................................................................

118

• Should you remove knob bolt and screws for

stand, make sure to put them in a safe place out of

children’s reach, so there is no chance of them

being swallowed accidentally.

..........................................................................................................

IMPORTANT NOTES

In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2,

3 and 4, please read and observe the following:

Power Supply

301

• Do not use this unit on the same power circuit with any

device that will generate line noise (such as an electric

motor or variable lighting system).

307

• Before connecting this unit to other devices, turn off the

power to all units. This will help prevent malfunctions

and/or damage to speakers or other devices.

Placement

351

• Using the unit near power amplifiers (or other equipment

containing large power transformers) may induce hum.

To alleviate the problem, change the orientation of this

unit; or move it farther away from the source of inter-

ference.

352a

• This device may interfere with radio and television

reception. Do not use this device in the vicinity of such

receivers.

352b

• Noise may be produced if wireless communications

devices, such as cell phones, are operated in the vicinity of

this unit. Such noise could occur when receiving or initi-

ating a call, or while conversing. Should you experience

such problems, you should relocate such wireless devices

so they are at a greater distance from this unit, or switch

them off.

354b

• Do not expose the unit to direct sunlight, place it near

devices that radiate heat, leave it inside an enclosed

vehicle, or otherwise subject it to temperature extremes.

Also, do not allow lighting devices that normally are used

while their light source is very close to the unit (such as a

piano light), or powerful spotlights to shine upon the

same area of the unit for extended periods of time.

Excessive heat can deform or discolor the unit.

355b

• When moved from one location to another where the

temperature and/or humidity is very different, water

droplets (condensation) may form inside the unit. Damage

or malfunction may result if you attempt to use the unit in

this condition. Therefore, before using the unit, you must

allow it to stand for several hours, until the condensation

has completely evaporated.

356

• Do not allow rubber, vinyl, or similar materials to remain

on the unit for long periods of time. Such objects can

discolor or otherwise harmfully affect the finish.

357

• Do not put anything that contains water (e.g., flower

vases) on the unit. Also, avoid the use of insecticides,

perfumes, alcohol, nail polish, spray cans, etc., near the

unit. Swiftly wipe away any liquid that spills on the unit

using a dry, soft cloth.

358

• Do not allow objects to remain on top of the keyboard.

This can be the cause of malfunction, such as keys ceasing

to produce sound.

359

• Do not paste stickers, decals, or the like to this instrument.

Peeling such matter off the instrument may damage the

exterior finish.

Maintenance

401b

• To clean the unit, use a dry, soft cloth; or one that is

slightly dampened. Try to wipe the entire surface using an

equal amount of strength, moving the cloth along with the

grain of the wood. Rubbing too hard in the same area can

damage the finish.

402

• Never use benzine, thinners, alcohol or solvents of any

kind, to avoid the possibility of discoloration and/or

deformation.

Additional Precautions

551

• Please be aware that the contents of memory can be

irretrievably lost as a result of a malfunction, or the

improper operation of the unit. To protect yourself against

the risk of loosing important data, we recommend that

you periodically save a backup copy of important data

you have stored in the unit’s memory in another MIDI

device (e.g., a sequencer).

552

• Unfortunately, it may be impossible to restore the contents

of data that was stored in another MIDI device (e.g., a

sequencer) once it has been lost. Roland Corporation

assumes no liability concerning such loss of data.

553

• Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using its jacks

and connectors. Rough handling can lead to malfunctions.

556

• When connecting / disconnecting all cables, grasp the

connector itself—never pull on the cable. This way you

will avoid causing shorts, or damage to the cable’s

internal elements.

557

• A small amount of heat will radiate from the unit during

normal operation.

558a

• To avoid disturbing your neighbors, try to keep the unit’s

volume at reasonable levels. You may prefer to use

headphones, so you do not need to be concerned about

those around you (especially when it is late at night).

559a

• When you need to transport the unit, package it in the box

(including padding) that it came in, if possible. Otherwise,

you will need to use equivalent packaging materials.

561

• Use only the specified expression pedal (EV-7; sold

separately). By connecting any other expression pedals,

you risk causing malfunction and/or damage to the unit.

562

• Use a cable from Roland to make the connection. If using

some other make of connection cable, please note the

following precautions.

• Some connection cables contain resistors. Do not use

cables that incorporate resistors for connecting to this

unit. The use of such cables can cause the sound level

to be extremely low, or impossible to hear. For infor-

mation on cable specifications, contact the manufac-

turer of the cable.

Specyfikacje produktu

Marka:	Roland
Kategoria:	Niesklasyfikowane
Model:	VK-88

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roland VK-88, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Roland

Roland KS-V7 Instrukcja

29 Grudnia 2024

Roland CYQ-12 Instrukcja

21 Grudnia 2024

Roland PDQ-8S Instrukcja

21 Grudnia 2024

Roland PD-14DSX Instrukcja

10 Grudnia 2024

Roland V71 Editor Instrukcja

10 Grudnia 2024

Roland KD-22 Instrukcja

10 Grudnia 2024

Roland Bridge Cast One Instrukcja

10 Grudnia 2024

Roland NEQ-H Instrukcja

10 Grudnia 2024

Roland Graphics Presenter Instrukcja

10 Grudnia 2024

Roland KD-18 Instrukcja

10 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025

Crivit IAN 290909 Instrukcja

15 Stycznia 2025

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025